Flowchart: unwind-í·split cut-í·fold-í·synchronization transport-í·qutitative moisture-í·cut-í·pile and count - 2-1 UNWIND 1) Raw material: dust-less paper, nonwoven 2) Raw material width:600-1450mm 3) Raw material weight:35-90g/¬O(the dust-less paper :above 55g/¬O 4) Raw material outer diameter:1200 mm(maximum) 5) Raw material inner diameter:76.2mm 6) Raw material Qty: 2 sets 7) Raw material split: 6 lanes/one raw material, total 12 lanes 8) Small row width: 150-250mm 9 Raw material drive: adjust the tension automatically 10) Adjust the raw material states (left and right) 11 Photocell check, when the raw material is used up, the machine atop automatically 12 Photocell check, if the raw material have color joint, the machine alarm 13) Uninstall raw material belt, width 90mm 2-2 FOLDING 1) Folding width:90-115mm (adjustable) 2)Folding type: pop up/non pop up(both) 3) Cut length:120-230mm (digital adjust, standard) 4) Piling Qty:20-120 mm 5 Piling height: below 100mm 6) Folding speed: 3000-4000 sheets/min 7) Operate view: 10.4¿òliquid screen 8ú Moisture type: quantify moisture by single sheet, 10 sprayer(moisture by single sheet) 9) Moisture Qty set: liquid screen set, no balance liquid 10) Moisture scope: moisture Qty 60-80% or 50-500g/bag 11 Count type: servo control, auto piling 12 Split type: synchronization rotary cut 13 Material of cutter: SUS440, it is need to grind after cut 80,000,000 sheets. 2 40HQ
Main functions and features: 1. Double route forming system with wrapping by tissue, using large and small cotton cores. The products are economic and practical. SAP may be supplied at a fixed amount in designed locations or in a mixing way. 2.Crusher system adopts sawmill or hammer mill with long fiber and better absorbent capacity. 3.Fluff core uses double-moulds forming or aggregate unit. 4.With warning function for SAP in lower place. 5.With standing cuffs, frontal waist tape, sides waist tape, elastic waist tape, elastic rubber for leg mechanism. 6.Main material with constant tension control auto-wind, rectifying a deviation guide. 7.Trifolded arranging out. 8.With warning and shutting down functions by PLC control, material end detection and rejection system. 9.Driven by frequency. Machine with PLC control and touchable screen. 10.Hot-melt applicator is set in front of the machine. Such bridge style makes it easy to feed the glue and control the temperature. 2íóMain technical parameters: 1.Type: JWC-LKC-SL 2.Overall Dimensions:(23*3.2*3) M (L*W*H) 3.Working space:(26*5*4) M (L*W*H) 4.Weight: 28.5T 5.Power supply: 380V 50HZ 6.Installation Capacity: 88KW 7.Designed speed: 150 pieces/min 8.Economic speed:(80-120) pieces/min 9.Product specification: S, M, L (optional). 2 40HQ.
Main Function: 1. Single route forming of the core. Crusher can crush treated and untreated fluff pulp. Fluff pulp feeding is controlled by servo motor. Or this part material can be replaced by air laid paper. 2. SAP feeding device, SAP is added mixed with fluff pulp and controlled by servo motor. If air laid paper replaces fluff pulp, then SAP feeding device can be cancelled. 3) Tissue paper two sides folding. If air laid paper replaces fluff pulp, then tissue paper is unnecessary to use. 4.calendaring device 5. shape fixing of the tissue paper two sides folding. If air laid paper replaces fluff pulp, then tissue paper is unnecessary to use. 6. Net shape pressing device. Cylinder pressing. 7. Fluff core or air laid paper position adjusting device 8. Fluff core or air laid paper cutting device. Cylinder pressing. 9. bottom film and top sheet feeding, Glue adding and fixing shape by pressing. 10. Silicon rubber roll device to press the glue on the padí»s two sides. 11. Pad vertical folding 12. final cutting. Cylinder pressing. 13. Wastes rejection device 14. Pad crosswise folding 15. Auto-counting and arrange coming out. 16. Raw material driving wheel, limitless speed adjusting 17. Adopting carrier before pressing device 2íóTechnical Parameters: 1. Model: JWC-CFD-SV 2. Designed speed: 220 M/Minú+ 3. Real production Speed: 200 M/Min 4. Electricity: 380V 50HZ 5. The main stress pole of the machine frame adopts 120*120*8 square shape tube; main board is 30mm thick. 6. Capacity: 350kw(including glue applicators) 7. Unqualified rate: í_2% (exclude the factors of glue applicator and splicing material and conjoint material) 8. Machine size(not include crusher): 20mí-1.7mí-3m(LXWXH) 9. Weight: 72T (not include crusher) 2 40HQ+1 20GP
Main functions and features: 1. The machine can produce regular type, economic type and high grade type baby diapers. 2. Materials of stereo-protection are complex and molding on machine. Waistband, frontal tape and side tape are cut automatically. Extension of rubber band can be regulated. 3. The quantity of sap and fluff pulp can be adjusted freely according to the customerí»s requirements. 4. Raw materials automatic unwinding system, tension of material during production is stable. Materials automatic splicing, rejection units and edge guard system all attached using with the main machine. 5. Programmable controller, man-machine interface, frequency converter is of germany simens brand. 6. The machine is attached with fully automatic packing machine (stacker), making packing simpler and save labor force. 2íómain technical parameters: 1.Type: jwc-nk400 2.Designed output:400 pieces/min ú¼ real production speed: 300-350 pieces/min 3.Installation capacity:118kw(380v 50hz) 4.Overall dimensions:(26.5*3.2*3)m (l*w*h) 5.Total weight:38t 6.Product specification:(l*w)(it can as your order) S:(380*270) mm m:(450*310)mm L:(520*330)mm xl:(540*340)mm 2 40hq+1 20gp
Infinity Precision-Machinery mainly cooperate with famous company at home and abroad, can machine all kinds of precising parts made from series of material, also can assembly. The products are mainly used in projecting and agricultural machines, oil field equipments,auto, Railway Equipment ,medical apparatus and so on.
1. Special for cement factory with easy and convenient operation. 2. Precise counting, high speed and durability 3. Available for single bag counting, continuous bags counting and batch counting. 4. Intelligent to identify continuous cement bags with the method of two-pass belt speed compensation. 5. Intelligent to identify small stack bag with the method of irregular continuous cement bags compensation. 6. Photoelectric isolation of signals and strong anti-interference 7. Storage function in case of power off to prevent data loss. 8. Elegant appearance, available for external connection with several large screen displays.
We`re manufacturing a wide range of electrical contat rivets as well as the machines for the production of solid and bimetal contact rivets. Acc. To the wishes of our customers.
Cutoff machine The cutoff machine is consist of decoil, straighten device, feeding device, cutoff machine and collector table for sized length tubing, In addition, there are a number of options available to customize your cutoff machine to your specific application. Copper tubing, Aluminum buting are available for the machine process. Seaworthy packing by standard container.
Multi-function cylindrical laminating machine Making use of the good adhesive property of polypropylene & polyethylene at melting status, the machine adheres and laminates paper or color-printed opp & cpp film to woven bag under pressure, and through cut-off and sewing to make paper & plastic laminated or color-printed packaging woven bags. The laminating with melted polypropylene & polyethylene film on the woven bags of instant noodle, melon seeds and foods. The extruder with helical gear reducer of 20crmnti alloy steel adopts automatic temperature-control system to adjust melting temperature, the the screw and cylinder are made of 38crmoaia alloy steel and done treatment of nitrogenation. The double-die can realize single or double-face coating, width of coating&laminating can be regulated, and stepless speed regulation is to control coating thickness and laminating speed, 6 wind-up station for material feeding. The gas-liquid edge correcting for rewinder assures the accuracy of coating. Pnenumatic roller can assure even pressure . Automatic edge cutting , edge-blowing , perforating , edge-folding , cutting-off and winding devices are applied.
Auto-matic knife grinding machines.
The technical of isolating a section of pipeline for repairs and additions without interruption of service is applied in gas network, urban gas pipe, water pipe network. The use of the product can ensure when everthing is normal that branch pipe installation, substitution for a damaged pipe, valve restoration and other tasks: can be performed, which prevent the economic loss, eliminate the awful influence on manufacturing, and keep danger away. Wooden case
Sewer cleaning machines bucket type, jetting suction machine, gully suction machine, super sucker, sewer rodding machine.
Features and options of basket mill 1. Suitable for mass production of materials with medium and low viscosity. 2. Convenient for color changing and cleaning, no need for pipe cleaning, which saves solvent. 3. Grinding speed adjustable and wider grinding scope. Technical Parameter: Model Chamber Volume(L) Motor Power(KW) Output Capacity(L/h) Medium Size LBM-20L 20 18.75 100-800 1.8-2.5 Weight:1500kg Standard Lot Size:2200*1600*1800 Dimensions:2000*1200*1600.
Features and Options of A5-Pegs type Conical Horizontal Sand Mill 1. New double-cone design of grinding chamber enable grinding beads to move to and fro automatically, giving more uniform distribution of grinding beads. 2. Pegs type stator and rotor enables grinding beads to have very high abrasive force; combined with streamlining movement of fluid inside the conical chamber, ultrafine dispersing effect can be achieved. 3. Dual-cooling method of stator and rotor is used, so that high temperature in the course of grinding will not be a problem for products of high viscosity. 4. Special separation method is adopted. Finer grinding beads or pure zirconium beads can be used to gain ultrafine grinding granularity by just one or two grinding treatments. Technical Parameter: Model ChamberVolume(L) Motor Power(KW) Output Capacity(L/h) Gross Weight (kg) Dimension(mm) A5 5 18.75 60-300 840 1600x800x1700 Weight: 840KG Dimension(mm):1600x800x1700 Standard Lot Size:1800*1000*1900
1. Small; ideal equipment for laboratory use. 2. Nimble and practical structure, quiet running. 3. Self-cycle grinding structure with no need for pump and valve. 4. Frequency inverter is adopted to adjust rotation speed of main unit, and grinding effect can be controlled easily. 5. Easy to operate, convenient for dismantling and cleaning of grinding groove, and testing formula can be changed rapidly. 6. The capacity reached in tests may be scale up to the large production mills. Technical Parameters Model PowerKW) Speed(rpm) Processing capacity(L) Output Capacity(kg/h) Dimmension(mm) LSM-0.3L 0.75 30-1500 0.5~4 1-10 630X410X500 Application: Appraisal of raw material, develop of formulation and evaluation of grinding media Dimmension (mm):630X410X500 Weight:40kg Standard Lot Size: 850X600X700.
We have different size and functions.
An accurately conditioned lapping plate rotates in the horizontal plane, on which conditioning rings, also rotating freely in the direction of the lapping plate, carry the work pieces, with the surface to be lapped, in contact with the lapping plate. Suitably mixed lapping compound is fed onto the lapping plate which laps/polishes the surface to be lapped and the flatness of the lapping plate is transferred to the workpiece. Lapping plate dia from 300mm to 1500mm available.
Roll forming machine Roll forming is a continuous metal forming process which bends or (forms˜ sheets, strips or coiled stock into predesigned shapes or profiles by passing the metal between successive pairs of rolls that increasingly (gradually) shape it till the desired cross section is achieved, thereby adding strength and rigidity to light weight metals. Except for a slight thinning of the metal at the bend radius, the metal thickness does not get altered. Almost any material that can be formed to the desired radius at room temperature can be roll-formed. The more ductile the material, the better it will form. This process can handle ferrous, non-ferrous, hot rolled, cold rolled, polished, plated or pre-painted materials as well. Metals as thin as 0.127 mm and as thick as 19 mm can be roll formed depending on the machinery. Normally cross sectional tolerances from +/- 0.25 mm to +/- 0.78 mm can be achieved but if better tolerances are enquired, a material that is amenable to such tolerance should be chosen.
Auto-Feeding Precise Circular Sawing Machine Features & Functions: : * Vertical sliding saw head ensures stable and precise cutting ( Circular Saw ) * Backlash eliminating device prolongs the life of saw blade * Counter Balance System for maximum stability through the entire cut * Patented Floating Feeding Carriage for superior cutting length accuracy and smooth material handling * Rigid and reliable clamping vise provides secure material holding * Automatic lubrication system maintains good work performance * Circulating cooling system results in smooth cutting surfaces and longer blade life * Electronic Saw blade protection cover for safety operation * Built-in chips tray for convenient cleaning and maintenance.
Metal Sawing Machine Features: 1.Automatic feeding is carried out by pressure produced through the exchange between air and oil. 2.Stepless speed changing; automatic feeding speed is stable is stable. 3.Accurate and smooth operation. 4.Suitable for large volume and long-time operation. Functions: 1.Suitable for sawing steel pipes, think or thin pipes, and stainless pipes for doors and windows. 2.Handless straight cut of 90¦-60¦ beveling form right to left. 3.Can also handle 180¦ slotting.
