Metal Sawing Machine

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. 1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. 2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy. 3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available. 4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). 5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness. 6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate. Model ZG-510SA Sawing angle +45° ~ 0°~ -45° Blade size 20"x1" Inner hole Saw blade 3000R.P.M. Machine motor 5 HP Pressure required 4-6kg/cm² Size of Table 920x650mm Table height 900mm NW/GW 570 / 640kgs Machine dimension ( LxWxH ) 1200x1090x1780mm Packing dimension ( LxWxH ) 1320x1210x1980mm

Supplier: Steel alloys, non ferrous metals, chemicals, machinery, power plants, universal joint shafts, gear spindle couplings, textile packaging machines
Services: Liaison representatives & service providers
Buyer: Steel alloys, non ferrous metals, industrial chemicals and machinery

Supplier: Metal band saw machine, metal cutting machine, CNC machine

Supplier: Metal cutting band saw machines, metal cutting CNC band saw machines, band saw machines

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile. 1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5. press height and speed and saw cutting height and speed can be set according to material size and thickness. 6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate. Model ZG-610SA Sawing angle +45° ~ 0°~ -45° Blade size 24"x1" Inner hole Saw blade 2000R.P.M. Machine motor 7.5 HP Pressure required 4-6kg/cm² Size of Table 1130x800mm Table height 1030mm NW/GW 790 / 870kgs Machine dimension ( LxWxH ) 1330x1200x2000mm Packing dimension ( LxWxH ) 1450x1320x2180mm

Control, 7.5KW spindle motor Optional accessories: GSK980TD, HNC-21TD or KND-1000T, GT-66T, Siemens 801 CNC system Hydraulic chuck, Hydraulic tail-stock.