Double wall paper cup/bowl forming machine can be used to make double wall cups for coffee or for paper noodle bowls. and some other similar containers Machine specifications: Paper Cup Size : 2-14oz paper cup (or bigger size of paper cups) Raw Material: PE coated paper, Varnishing Printed paper, or other Suitable paper weight: 170-450gsm (Recommend250-300 gsm) Rated Productivity: 35-45 pcs / minute Total Power: 4 KW Power Source: 380V 50Hz or other required Total Weight: 1000 Kg Package Size (L x W x H): 2450 x 1200 x 1500 mm
Double pe paper cup machine with ultrasonic sealing,it can make cup size from 2-14 oz,but for more,it can make more thickness paper(paper material can reach to 350gsm.it can make smallsize icecream bowl for gelato,soup paper cup for take away No. Name Description 1 Model BJ-A12 automatic 1 side pe and 2 side paper cup machine 2 Cup size 2-14 oz (mould can be exchanged) 3 Paper requirement 160-350gs with 1 pe or 2 pe paper 4 Productivity 45-55pcs/min 5 Total power 4.8KW 6 Total source 380V,50HZ or other required 7 Total weight 1500kg 8 Package size 2800(L)*1300(W)*1800(H)mm 9 Package Seaworthy packing 10 Payment way T/T,30% payment in advanced,70% balance before shipping 11 Air compressor Need to buy air compressor for double pe paper cup machine
No. Name Description 1 Model BJ-A12 automatic 1 side pe and 2 side paper cup machine 2 Cup size 2-14 oz (mould can be exchanged) 3 Paper requirement 160-350gs with 1 pe or 2 pe paper 4 Productivity 40-45pcs/min 5 Total power 4.8KW 6 Total source 380V,50HZ or other required 7 Total weight 1500kg 8 Package size 2800(L)*1300(W)*1800(H)mm 9 Package Seaworthy packing 10 Payment way T/T,30% payment in advanced,70% balance before shipping 11 Air compressor Need to buy air compressor for double pe paper cup machine
1 Product introduction 1. Kn95 mask edge banding machine is an important part of kn95 mask semi-automatic production line. It is easy to operate and can operate continuously with high production efficiency. It is suitable for edge sealing of kn95, N95 and other masks. 2. Ultrasonic welding, continuous and stable work. Efficient production, durable. 3. The cylinder is made of Taiwan Adec cylinder, with reliable quality. 2 Product parameters Application: for N95 mask, kn95 mask, activated carbon mask and other masks edge sealing. Size: 1300mm x 600mm x 1200mm (subject to actual condition) Welding type: Ultrasonic Capacity: about 2-5 seconds / piece Power supply: AC220 V, 50 Hz Air pressure: 8 kgf / cm Power: 1 kW Operating temperature: - 30 to 80 Weight: About 50kg
1 Product introduction 1. Semi automatic mask welding ear belt machine is an important part of mask production line. The ear band welding machine is a high-speed ear band welding machine specially designed for mask rubber. It is easy to operate, can operate continuously at high speed, and has high production efficiency. It is suitable for ear band welding of disposable plane mask and N95 mask. 2. Ultrasonic welding, continuous and stable work. Production, durable. 3. The cylinder is made of taiwanyadeke cylinder with reliable quality. 2 Product parameters Purpose: used for ear band welding of disposable face mask, N95 mask, activated carbon mask and other masks. Size: 1300mm x 600mm x 1200mm (subject to actual condition) Welding type: Ultrasonic Capacity: about 2-5 seconds / piece Power supply: AC220 V, 50 Hz Air pressure: 8 kgf / cm Power: 1 kW Operating temperature: - 30 â?? to 80 â?? Weight: About 50kg
1 Purpose This series of separator is specially designed for the electrical performance test and sorting of large-size magnetic ring, which replaces the current manual separation, effectively prevents the phenomenon of artificial wrong separation, and greatly improves the production efficiency of the equipment. 2ã?? How it works The machine is mainly composed of feeding mechanism, testing mechanism, sorting mechanism and electrical control mechanism. First, the magnetic ring is manually poured into the hopper, and then the flow of the magnetic ring is controlled by the photoelectric control device, The magnetic ring falls into the swash plate and is sent down through the operation of the swash plate device to fall into the test mechanism, The magnetic ring is tested, the test results are input into PLC, and the sorting mechanism is driven after processing, The magnetic ring is put into the warehouse by grades to realize automatic sorting. 3 Main features This machine has strong versatility. By properly adjusting some parts, the magnetic rings of different specifications can be tested and sorted. The key actions are coordinated and controlled by photoelectric signal through PLC, which is easy to operate, stable and reliable. 4ã?? Main technical parameters Sorting speed: silicon steel core can be adjusted in the range of 4-100 pieces / min, magnetic ring can be adjusted in the range of 100-150 pieces / min, and amorphous iron core can be adjusted at 50-70 pieces / min. Sorting magnetic ring specification: diameter 10-22mm, thickness 7-13mm. The outer diameter of silicon steel core is 15-45mm, and the height is 5-13mm. Sorting number: 5 / 9 (optional) The test error is less than �± 1% (depending on the accuracy of the selected test instrument). Power supply: AC220V 3000W Body dimensions: 2250 x 1150 x 1700 (LxWxH) Total weight: about 220kg
Main characteristics of amorphous core winding machine 1. The winding machine is made of unidirectional winding, automatic cutting and automatic welding, 2. The continuous feeding of the winding machine adopts constant tension control to ensure the product tightness, size consistency and adjustable tension. 3. The feeding trough of this machine guides and corrects the feeding. Easy adjustment, wide width range 4. The unique design of the cutter is made of special steel, which will not cut cracks. It is durable and maintenance free for life 5. Good consistency of welding machine, adjustable current, suitable for welding of various materials, good stability 6. The mechanical winding adopts Siemens Servo motor to drive the winding needle through the synchronous belt, which is more accurate, reliable and fast than that of the traditional mechanism driven by the auxiliary structure such as motor, so as to ensure that the size and number of turns of amorphous tape are consistent, and the quality is effectively improved. 7. This machine adopts photoelectric control, so that the positioning is accurate, the operation is more stable and reliable, the winding productivity of the machine is improved, and the failure rate is reduced. Technical parameters: Inner diameter of iron core: 2-45mm Outer diameter of iron core: 3-60mm Core height: 3-25mm Power supply: AC220 V, 50 Hz Power: 1.2kW Note: those not in the above scope can be customized according to customer requirements.
1 Main features 1. The winding machine is made of unidirectional winding, automatic cutting and automatic welding, 2. The continuous feeding of the winding machine adopts constant tension control to ensure the product tightness, size consistency and adjustable tension. 3. The feeding trough of this machine guides and corrects the feeding. Easy adjustment, wide width range 4. The unique design of the cutter is made of special steel, which will not cut cracks. It is durable and maintenance free for life 5. Good consistency of welding machine, adjustable current, suitable for welding of various materials, good stability 6. The mechanical winding adopts Siemens Servo motor to drive the winding needle through the synchronous belt, which is more accurate, reliable and fast than that of the traditional mechanism driven by the auxiliary structure such as motor, so as to ensure that the size and number of turns of amorphous tape are consistent, and the quality is effectively improved. 7. This machine adopts photoelectric control, so that the positioning is accurate, the operation is more stable and reliable, the winding productivity of the machine is improved, and the failure rate is reduced. 2ã?? Technical parameters Application: used for producing permalloy iron core, suitable for winding ring, square, rectangular, C-shaped transformer core. 2. Die diameter: 6-80mm Maximum outer diameter of winding: 50-100 mm Steel sheet width: 5-50mm Thickness of steel sheet: 0.15-0.6mm Alignment accuracy of both sides of iron core: < 0.2mm Power supply: AC220V 50 / 60Hz Air source: 8kgf / cm Equipment weight: about 650kg Note: the iron core specification depends on the model, which can be customized according to customer requirements.
Product Brief The winding equipment is widely used in the winding of silicon steel core. This equipment is suitable for winding circular, square, C-shaped, rectangular and other silicon steel cores. The whole process of machine production is controlled by computer, and the whole process of feeding, bucking, topping, winding, cutting and welding is monitored in a closed-loop way, which is fast, efficient, stable and does not require special personnel to watch. Main characteristics 1. Automatic feeding, clamping and hooking, winding, cutting and punching, welding and receiving the core with high speed and efficiency. 2. PLC system and HMI touch screen to control servo motors, moving parts and pneumatic components . 3. Continuous feeding, adjustable tension, accurate counting, closed-loop monitoring, automatic alarm. 4. Equipped with laser welder.Automatic laser welding with perfect welding spot, and pick up cores by machine hand. 5. Winding Core: ID=�¦8-40mm, OD Max=�¦50mmï¼?Height=6-25mm. technical parameter Inner diameter of iron core: 8-260mm Outer diameter of iron core: 50-300 mm Steel sheet thickness: 350.18 mm Steel sheet width: 5-120mm Alignment accuracy of both sides of iron core: 0.2mm Power supply: AC220V / AC380V (actual model)
20, 30 40, 50, 100, 150 Ton Power Press Or More As Per Requirement Of Buyer.
Station configuration is according to assembly process and cycle time, the assembly line consists of station machines, conveyor, pallet and material feeder. Monitor assembly procedure, Poke yoke, monitor pressure and tightening torque. Details configuration and automatic level shall be as per customers' requirements.
Water Distillation App cap 4ltr ph with mettal heater
1. 5 LCD Touch Screen : Allows quick, easy & interactive experience to users. 6SENSE Technology : Maintains set power over wider range of tissue by Tissue Feedback Technology. 2. PREM : Patient Return Electrode Monitoring provides safety against the patient return electrode site burns. 3. Endo Cut Mode : Allows pulse interval controlled cutting for Polypectomy and Papillotomy. 4. Randomized SPRAY Coag : Provides homogeneous, superficial & faster coagulation over larger area. 5. Bipolar Cut & Coag modes : Independent display setting using its respective footswitch. 6. BiCoag Alarm : Audio feedback after completion of Bipolar coag, reduces charring and sticking. 7. AutoBip (Optional) : Automatic Start & Stop of Bipolar current by tissue sensing without foot switch activation. 8. Self Diagnosis : Ensures the ESU with accessories are safe for functioning & display error codes if any. 9. User Programmable : 20 user settable programs with procedure & surgeon name. 10. Remote Power Settings (Optional) : To change mode and power from sterile field by normal Handswitch Pencil. 11. Time Out Function (Optional) : Automatically stops the HF output incase of prolonged activation.
ANGELBISS Innovative Direct Plug-in Bottle System & Double anti-overflow protection system Run 180 Minutes without AC power FEATURES Rechargeable DC 12V Ambulance car use DC 12V Fast recharge in 90 minutes, Continuous run 3 hours Superior Lithium batteries Double anti-overflow protection system Direct Plug-in Bottle System, only one push to take out bottle 1400ml capacity suction bottle Innovative filter technology which prevents penetration of micro organisms and secretion into the device Only one inlet for suction hose, avoid misleading of air inlet and outlet Easy clean & sterilize & user-friendly operations Accessories AVERLAST 25B 1 Silicone suction hose 6mm, L=1.30m 1 Power adapter, inlet AC 220V , output DC 12V 1 Car lighter power cord adapter, DC 12V 1 Universal PC power cord wires 1 filter 1 Suction catheter (free)
Automotive Axle Assembly Equipment consists of automotive axle assembly line, differential assembly line, final drive/differential assembly line, wheel hub assembly line, wheel edge differential assembly line, run in tester, nut tightening machine, automatic shim selecting machine, start torque testing machine, etc.
Application: For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design. Double test space frame: With high structural stiffness,4 columns and 2 screws with double testing space The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc. Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.
This series materials testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive KStest software. Typical test applications for wide range of tension, compression, bending, shearing and low cycle test, include metal, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts, etc. Standards: ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849- 2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc
Condition: New Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Restaurant, Home Use, Construction works , Energy & Mining After Warranty Service: Video technical support Local Service Location: Japan, Malaysia, Australia, Chile, UAE, Sri Lanka, South Africa, Canada, Turkey, United Kingdom, United States, France, Germany, Philippines, Brazil, Peru, Thailand Showroom Location: South Korea, Chile, UAE, Sri Lanka, South Africa, Japan, Malaysia, Australia, Canada, Turkey, United Kingdom, United States, Italy, France, Germany, Philippines, Brazil, Peru, Saudi Arabia, Russia, Spain, Thailand Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: New Product 2020 Warranty of core components: 5 years Place of Origin: Shandong, China Brand Name: Zhou Xing Warranty: More than 5 Years After-sales Service Provided: Online support, Free spare parts, Field installation, commissioning and training, Field maintenance and repair service, Video technical support Raw materials: Stainless Steel Product name: Plaster Gypsum Cornice Production Machine Use: Building Dacoration Materials Advantage: High Efficent;Full Automatic;Environmental friendly; Type: Ful-automation Color: White and red Capacity: 6000 pieces per day Keywords: Gypsum Ceiling Cornice machine Finished products: Fire-proof Gypsum Cornice Exported countries: 20 Countries
Surgical Latex / Nitrile Glove Making machines. Examination Latex / Nitrile Glove Making machines. Vinyl Glove making machine Surgical / examination glove making plant turnkey project.
THE PRODUCTION LINE INCLUDES: STATION I. MASK WELDING & CUTTING STATATION 1PC STATION II. EARLOOPS AUTOMATIC WELDING STATION 2PC MASK TYPE: COMMON MASK,SURGICAL MASK NOSE-BRIDGE CAN BE MADE WITH AUTO FEEDING, CUTTING AND ULTRASONIC WELDING. OUTPUT SPEED: 100PCS/MIN MASK SPECIFICATION: 175MMX95MM, 3 LAYERS PROCESSING MODE: ULTRASONIC WELDING EARLOOPS FIXED BY ULTRASONIC WELDING AUTOMATICALLY. OPERATION SCREEN: LCD TOUCH SCREEN AIR PRESSURE: 0.6MPA POWER 10KW VOLTAGE SINGLE PHASE 220V/50HZ MACHINE DIMENSION: 5000MM X 7000MM X 1800MM
