This system can meet the requirements of biaxial fatigue testing of cross, uniaxial fatigue testing of clintheriform and tensile-compression fatigue testing of cylindrical under high-low ambient temperature. Applying to the research of biological tissue, medical devices, textiles, rubber materials, plastic film, metal, composite materials.whats more, it has concentric loading adjustment mechanism and temperature compensation system of hydraulic clamp. Model DPL-9010/2 Qty of channel control 4 Laoding force Static max loading force 100KN Loading force of dynamic 100KN Actuator Qty :4 Loading frequency 0.01H½?20Hz Flexible rate 0ï½?340mm/s without adjustment Dynamic property Loadingï¼?±100kNï¼?xAmplitudeï¼?±0.5mmï¼?xFrequency(20Hz) Loading accurcy ±0.5%FS Displacement accuracy ±0.5%FS High-low ambient temperature -196ï½?350 Specimens Workspace 840mm x 840mm Testing specimens cross Widthâ?¤50mmï¼?Lenghthâ?¤350mmï¼?Thicknessâ?¤30mm square Lenghthâ?¤350mmï¼?Thicknessâ?¤30mm cylinder Norm stretch and compressure Control mode Force,displacement,time,loading rate,gradation loading,unidirection loading Mainframe Size 3800mm(L)X2300mm(W)X3800mm(H)
Electro-hydraulic servo fatigue testing machine is customized according to the customer's program of oscillating sintering furnace, the mainframe is in the form of high-rigidity four-column structure installing the oscillating sintering furnace .The system is equipped with 200KN dynamic servo actuator, which can meet the requirements of the maximum frequency of 50HZ and the amplitude of 0.3mm. The testing machine is mainly used in various sizes of metal and non-metallic materials of tensile and pressure fatigue sintering mechanical property testing, but also for kinds of structural specimens of tensile and pressure fatigue testing. The max load stiffness is 5GN/m and elegant appearance. Flux is 60L/min, max pressure is 22MPaï¼?max frequency is 50Hz, amplitude is 0.3mm, max dynamic-static thrust is 200KN, max frequency is 50Hz, max displacement 150mm,minimum dynamic thrust is 20KN, max frequency 50Hz
CSPL-20 testing machine is a high frequency vibration fatigue testing technique based on the theory of electromagnetism striction.This machine is mainly used for metal ultra-long life fatigue testing at room temperature, It can complete 104-1010 weeks of constant amplitude tensile and compression fatigue testing of 20kHz frequency. Generally, it takes 3.2 years to reach 1010 cycles at 100Hz frequency, CSPL-20 only takes 6 days to shorten the ultra-long life fatigue testing time.According to standard, all parts and instruments comply to international(SI) standards. Noise conform to national and industrial standard. The equipment is the domestic advanced level, with reliable control function, which adapt to long-term, stable, safety, reliable production demand. The most advanced ultrasonic device imported by Branson company, its more convenient of processing and maintain with excellent service. The equipment is the domestic advanced level, with reliable control function, which adapt to long-term, stable, safety, reliable production demand. The most advanced ultrasonic device imported by Branson company, its more convenient of processing and maintain with excellent service. Similarity: Signal generator of ultrasonic are same, testing theory and technology are same. Differentia: Similar products of Daojin can only complete the cylindrical specimens testing , DCSPL-20 can also complete the plate specimens testing. Dex advantage: we can carry out multiple ultrasonic fatigue test load and extending test program based on DCSPL-20. Operation conditions: control mode of computer setup and control. Power supply, AC220V±10%,50Hz±1,2HzKW Model CSPL-20 Frequency 20KHz±500Hz Proof stress range Normal stress 100ï½?1000MPa, constant stress Load type Symmetry tension-compression fatigue testing Specimens smoothly cylindrical and notch specimens Smoothly clintheriform and notch smaple. Control mode Adopt computers setup and control testing Power AC220V±10%ï¼?50Hz±1Hz,2KW
TH-2004D-R-300K 4 axis robot Benchtop glue dispensing machine Product introduction 4 axis robot rotating robot which can replace manual labor,save material,improve working efficiency,save time and production cost,you can equip dispensing system.It is suitable for liquid glue,sealing glue and so on,and it can dispense very well automatically. Function 1) Processing with bonding, coating, sealing, filling, drop, linear/ arc/ round gluing, etc. 2) Dispense in point, line, surface, arc, circle and irregular curve, and Four-axis linkage function is available. Features 1.Standard:CE certificate. 2.It can rotate 360 degrees. 3.X,Y,Z axis are all imported single linear guides with TBI brands, and precision stepper motors to run more stable than similar products, the load higher. 4.For R axis ,it is equipped with precision Stepper motor and speed reducer which can make our robot work smoothly. 5.It is easy to edit programs through teach pendant,when you finish parameters setting,it can work without teach pendant which can avoid staff misuse. 6.Our robot is small and delicate,equipped with technology from Japan and structure from Germany,it is very light and durable,also convenient to carry. 7.Adjustable voltage 110V/220V.
TH-2004D-300ML Benchtop dispensing robot for Hot melt adhesive glue Patent Numberï¼?ZL 2010 2 0120765.6 FEATURES 1.Feed system of hot melt heating tank.,avoid frequent add glue,Good for granular and striped solid hot glue. 2.Precision heating Valve is Precision suck back valve, close glue quickly,ensures no dripping 3.High precision liquid controller system. Application: Good for hot melt spraying and coating on clothes and carve cards,Diaper wet. Liquid Material: hot melt glue,hot melt adhesive. Packing capacity:granular hot melt adhesive and striped solid hot glue. Specification : ITEM TH-2004D-300ML X/Y/Zworking range 300 x 300 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 Weight 34kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste
Vibrating tamper factory in China.
Yanhuang Automation Equipment Co.,Ltd supply high speed nail making machine as an original manufacturer company. This machine is widely used in the manufacture of various nails, and is suitable for roll nails, paper-row nails,blind rivets,small cap nails and the like. The unique setting structure makes the stability of the hat good, and the 100% gurantee that the hat is round and positive, because it has the most headache problem for the boss of the aircraft, the first tail, the bent nail and so on. Its the revolution of the traditional nail making process, this high-speed nail making machine is faster and more energy-saving, and completely solves the problem of small proportion of long and short nails, partial caps, nail caps and nail rods. SPECIFICATIONS FOR X150 Hi-speed nail making machine Nail Details Nail length range mm 70-150 Nail making speed pcs/min 500 Nail diameter range mm 2.5-4.5 Main machine Main machine power kw 5.5 Pay-off power kw 1.5 Actual total power kw 4 Machine dimension Main machine dimension mm 1500x1300x1100 Pay-off dimension mm 1500x800x350 Electric box dimension mm 400x600x800
The universal testing machine can test multi types mechanical strength of metal or non-metal material, it mainly can test tensile, compression, bending strength. Normally the max loading is 300kn, 600kn, 1000KN. Hydraulic driven, digital display, manual oil control, test report print output.
3d wire polystyrence panel machine Panel length: 3000mm Panel width: 1220mm Polystyrene board thickness: 50mm-100mm Wire material: low carbon steel wire, galvanized, no processed but wire surface is clear. Wire dia.: 2-3mm Mesh size: 50x50mm Capability: 380-500m2 /8hours Rated power: 75kva Input power: ac380v 50hz Configuration: 3m2/min 0.6mpa Lack welding rate not more than 5% Welding intensity every point is not less than 300 n Overall dimension(mm) : 13500mmx1800mmx1700mm Weight: 4000kg
3d wire polystyrence panel machine
Automatic expanded mesh machine
Magnetic Drum Separator, Dry OR wet, Over band magnetic separator, Magnetic Roll separator, Concentrate, Magnetic Pulley, Coolant separator,
Application GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets, meanwhile GC-7960 could test water amount in organic solvent as well. Standards YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012 -
Thermosetting polystyrene coating machine it is coating machine for modified eps panels/propor panels/NF panels. it is one of the machines in modified eps fire proof panels making. The coating machine consists of mixing system, drying system, crushing system, feeding system, heat exchange system, raw materials mixer and storage, weighing system etc.It can coat fire proof materials on normal eps beads.
Paper width: 80 - 320 mm Paper length: 180 - 700 mm Side fold: 20 - 60 mm Paper weight: 30 - 80 gsm Max.Web width: 1.000 mm Max.Web diameter: 1.200 mm Plastic film width: upto 400 mm 3 x servo motor drives Hotmelt: robatech Mechanical speed: max. 400 cycles/min. Immediately available. Inspection on prior appointment. All information given by the source, which deemed as reliable. Availability subject to prior sales.
Slitter and rewinder, overhauled Manufacturer: andreotti, italy Model : tltc/600 Manufactured: 1999 Overhauled : december, 2016 Material to be handled -cellophane from25 gsm -polyethylene from 15 micron -polyester from 12 micron -paper from 20 gsm up to 150 gsm -laminates up to max. 150 gsm Technical data Width:1500 Max. Jumbo roll dia : 1200 mm Cutting width with max. Reel diameter 500 mm With single standard reel holders: min. 70 mm / max. 210 mm With single special reel holders : min. 55 mm / max.120 mm Cutting width with max. Reel diameter 600 mm With double reel arm holding system: min. Width 220 mm / max. 600 mm -the machine or equipment is offered with six (6) months warranty from the test run at the location. -availability is subject to prior sales. -all information is given by the source, which deemed reliable.
china coal 0001 WZ25-12 Mini Backhoe Machine For Sale Features of WZ25-12 Mini Backhoe Machine For Sale 1, WZ25-12 Mini Backhoe Machine For Sale designed with increased cab, security glass, bright and spacious. 2, Operation table: water temperature, oil temperature, current, at a glance. 3, Adopted suspension shock absorber-360 â?¢ rotate seat, with seat belts, and improve driver comfort and safety. 4, hinge type front and rear frames, small turning radius, full hydraulic steering, easy and convenient operation. 5, fully equipped with all the features of small excavators and loaders. 6, can be equipped with a variety of options to meet the needs of different users. 7, reset the tap unit and the wings legs, broken rock, and when you dig deeper than other forms of mining equipment with greater stability. Parameter of WZ25-12 Mini Backhoe Machine For Sale Operating weight 3600kg Capacity of bucket 0.25m3 System working pressure 20mpa Engine 28 hp Max. excavating height 3800mm Max. excavating depth 2600mm Max. excavating radius 5000mm Max. excavating width 550mm Capacity of bucket 0.8m3 Rated load 1200kg Dumping height 3000mm Dumping reach 950mm Min. turning radius 4500mm Grade ability 45% Ground clearance 220mm Wheel base 2180 Tread 1100mm Drive type 4WD Size(L*W*H) 5900mm*2080mm*2800mm
Sp(0.3-3.0) steel coil slitting machine manufacturers Coil thickness: 0.3-3.0mm Coil width:400-2000mm Productin speed:20-120m/min Pipe material: hr, cr, ppgi, gi, al, cu, etc Product description: sp(0.3-3.0) steel coil slitting machine manufacturers is applicable to coils of various specifications with the thickness of 0.3-3.0mm and width 500-2000mm. It can produce hr, cr, ppgi, gi, al, cu. Sp(0.3-3.0) slitting machine is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout, easy operation, highly automated and high production efficiency. 1. Technical parameters Model,Thickness,Coil width,Coil weight,Coil o.D,Coil o.D,Strip width,Number of stril Mm, Mm, Tons, Mm, Mm, Mm, Pcs, Sp(0.3-3), 0.3-3.0, 400-1600,20, 508, 610, 2000,,30, 8~20, Sp(1-6), 1-6, 500-2200, 25, 508, 610, 760,2200,,50, 5~15, Sp(2-10), 2-10,500-2200, 35, 508, 610, 760,2200,,50 3~10, Sp(2-12) 2-12,500-2200, 35 610, 760, 820,2200,,80, 3~10, Sp(5-20), 5-20 500-2300, 35, 610, 760, 820,2500,100, 2~8
Bench Top Ribbon Cable Terminal Crimping Press Technical Parameter Size:260*300*780mm(L*W*H Weight:80KG Power Source: Single Phase 220VAC/ 50/60HZ,10A Display: Chinese/English (English refers to user manual) Total Power:550W Cylinder Pressure:0.4-0.7MPaadjustable Working Efficiency: 12000 crimps/hourcauculated as 12Pins above ribbon cable) Appropriate Wire: 0.8-2.0mm,AWG20-28, Red Blue White FBC2468,Grey FBC2651,Color FBC and etc 2-40pins Cutting Length:>70mm Ribbon Cable Split Length: 30mm Crimping Strength: 1.5T
Available Wire: USB Cable, Power Cord, Headset Cord, Audio Cable Feature of Mute High Speed Wire Stripping Terminating Machine High speed: Every 0.2 seconds terminating speed Working method: foot pedal, motor work. Computerized control. Very easy to change die., Energy Saving Stripping and Terminating can be finalized at the same time. Description of Mute High Speed Wire Stripping Terminating Machine Model No.: LL-A2.0 Working Voltage: 220V-50HZ Power: 750W Crimping Force: 2.0TON Weight: 85KG Stroke: 30MM Size: W300XD280XH450 (mm) Safety Device: TDC Sensor
