3D Panel Machine

Model CN-XS-1220A Panel length: 3000mm Panel width: 1220mm Mesh wire diameter: 1.8-2.8mm Wire material: Low carbon steel wire, galvanized, no processed but wire surface is clear. Polystyrene Thickness: 50mm-100mm Total panel thickness: Max.130mm Truss wire: 2-3mm Capability: 360m2/8hrs Mesh size: 50X50, 52X52mm Configuration: 3m2/min 0.6Mpa Power: 380V 50Hz Dimension: 13.5X1.8X1.7m Weight: 4000kg. 40'GP 20'GP

3D panel machine Model CN-XS-1220A Panel length: 3000mm Panel width: 1220mm Mesh wire diameter: 1.8-2.8mm Wire material: Low carbon steel wire, galvanized, no processed but wire surface is clear. Polystyrene Thickness: 50mm-100mm Total panel thickness: Max.130mm Truss wire: 2-3mm Capability: 5 mins per 1 pc 3D panel. (3000mmX1220mm), about 430 sqm/8hrs Mesh size: 50X50, 52X52mm Configuration: 3m2/min 0.6Mpa Power: 380V 50Hz 75KW Power consumption: 1.9-3.5kw per hour Dimension: 13.5X1.8X1.7m Worker need: 4 workers Weight: 4000kg

3d wire panel machine The production line is high automation and efficient lower cost.It includes the following six parts:no conmodity quantity 1 wire mesh block panel m/c 1 set 2 wire mesh net m/c 1 set 3 wire straight m/c 2 set 4 wire rolling m/c 2 set 5 wire mesh cutting m/c 1 set 6 air compressor m/c 1 set The specifications Inserting wire structure single or double sides Production standard standard board (mm) length(max):4500 Width:1200 Material welding wire(mm) 2.0-2.5 Wick board(mm) 50-100 Panel space(mm) 50*50 50*100 100*100 Lack welding rate not more than 5% Welding intensity every point is not less than 300 n Overall dimension(mm) 13500*1800*1700

3d wire polystyrence panel machine

3D Leather Wall Panel Machine Wall Panel Machine Machine parameters Power:5.5KW Dimensions:1720*770*2180mm Forming time:2 minutes Weight:700KG Voltage:220 Pressure:0.8 MPA Machine Advantage: This is the third generation (newest generation) leather wall panel forming machine . machine cut from a piece of steel as a whole, stable and solid. Two stations, automatic forming and sealing edge in two minutes , and no need hot melt paper for sealing edge , save cost. the production speed is twice the old generation leather wall panel forming machine. Machine characteristics 1, the electrical system adopts programmable controller PLC has data input and output devices and safety logic control function,support automatic and manual operation. 2, low-voltage electrical components adopt advanced photoelectric sensor and thermocouple,can precisely control the key parts operation and has high stability. 3, the body using high-precision, high-strength steel alloy frame construction and special welding techniques and materials, rigidity, abrasion resistance to vibration, long life. 4, use pneumatic pressure and heat molding, short cycle times and high productivity. 5, vacuum pump and compressor equipped, PLC insure the cylinder parts runs steady and non impact) 6,air compressor and vacuum pump running at the same time,thermostat heating system can adapt different environmental temperatures.Above factors ensure a high degree of consensus on the molded product accuracy 7, use motor,power,gas integration technology , each program controlled, safe and reliable, high rate of finished products and low waster rate. 8,This machine could various designs of leather wall panels with changing the molds.

The capacity of the continuous line is 3-7m/min, length of the production line is 100m, the size of the final panel is 3-18m long, 900-1200mm wide, 20-150mm thick, the valid length of double belt conveyor is 24m, the total power is 300kw; The capacity of the continuous line is 3-7m/min, length of the production line is 100m, the size of the final panel is 3-18m long, 900-1200mm wide, 20-150mm thick, the valid length of double belt conveyor is 24m, the total power is 300kw;

▪panel from the continuous sandwich panel production line is a composite structure consisting of two external facings and an insulating core. The core can be flexible with polyurethane, mineral wool, glass wool, pir, phenolic or eps. Various profiles are available according to customer's requirement with pre-painted steel sheets, pvc sheets, aluminum paper or other similar supports;

Supplier: PU machine, EPS machine, 3D panel machine, sandwich panel machine

3D Leather Wall Panel Machine 3D wall panel machine Machine parameters Power:12.4KW Dimensions:1140*500*1670mm Stroke of movable beam:200mm Working speed:piece/30s Backing velocity:40 mm/s Nominal pressure:400kn Maximum working pressure of liquid:25MPa Voltage:380V Weight:1000KG Machine characteristics 1, Precise four-column guide design ensured high precision of products. 2, Use large-diameter hydraulic cylinders, high presser and stable operation. 3, Use resisting high temperature motors, ensuring safe and long-term service. 4, Made by high-precision and high-strength thick steel,deformation and rigidity. 5, Optimization design, simple, economic and applicable. Direction valve integrated system hydraulic control system, reliable, long life, small hydraulic impact, reduce the link pip and leak. Independent electrical control system, reliable, operating convenience, centralized control buttons, support manual and automatic function. 6, Up and down heating form, adjustable temperature,make product texture more clearly. 7, High sensitivity grating sensors ensure safety operation. 8, The upper and lower positions of active guide pillar, head and platen are set electromagnetic induction device, accuracy positioning , precision products texture has good consistency. 9, Pressure-keeping and time-delaying character. Adjustable working pressing and travel. 10, All-in-one, replacement of mold can produce various different patterns of products.