Dimension:l1600*w3250*h800mm(the standard of according to the actual data) Conveyor radius:r1050mm Belt width:w700mm Conveyor belt to the ground height:h800mmâ±20mm Conveyor mesh:fan-shaped plane with anti-static network Dust cover:electrolytic plate bending powder coating, the top set smoke and exhaust 2 (head and tail one each) The motor:taiwan mitsukoshi transmission motor, power 40w, tooth box ratio: 1: 100 Governor:domestic line speed governor Conveyor speed:0-300mm/min arbitrary adjustable;
Futures: 1.Smt pick and place machine adopts panasonic servo motor, imported railway to ensure it is stable and accuracy 2. Smt pick and place machine x.Y.Table axis adopts panasonic servo drive, cooperated with imported liner railway ensures its accuracy and speed 3.Four mounting heads work simultaneously, much faster. Smt pick and place machine nozzle above and down adopts imported railway with high precision and durable lifetime 4. Easy operate program, much more convenient, automatic vision makes position fixing more accurate and convenient 5. Smt pick and place machine have mutil-feeder optional, can meet different kinds of led mounting. 6. Powerful software adopts numbers and images to display the program coordinate, easy and more convenient.
Model no. Jaguar n250 Number of heating zones 2 Length of heating zones 600mm Body size 1800(l)*1200(w)*1600(h) Outside dimension 2600(l)*1200(w)*1600(h) Weight 700kg Total/running power 11kw/4-6kw Air supply 0.5mpa Preheating method Hot air Preheating power 220v 5kw Control method Press key +plc (option: touch screen, pc) Range of temp. Control Room temperature---300â?? Preheating time About 10-15mins for setting 150â?? Solder type Lead-free / sn-pb Solder pot capacity 220kg Solder pot temperature 300â?? Solder power 380v 6kw Solder temp. Control method Pid&ssr Wave crest drive power 500w 220v Warm-up time of solder About 120mins for setting 250â?? Pcb width 50-250mm Convey speed 0-1800mm/min Convey direction Lâ??r (râ??l optional) Convey angle 4â??7 ⺠Flux pressure 3-5 bar Flux capacity 3.2l
Nut slicing machine is the special equipment used for slicing nuts like peanuts, almonds, cashew nuts, walnuts and so on. Features: 1 The blades of the slicing machine are made of high-speed steel of high quality with sharp edge and long service life. 2 The body cover of the nut slicing machine is made of stainless steel plate, which is clean and sanitary. 3 Suitable for slicing a variety of nuts, such as peanuts, almonds, cashew nuts and so on. 4 Suitable for the pre-processing of jam, bread, cakes, etc.
Leveraging on our extensive market knowledge, we are providing a high-quality range of Automatic Incense Stick Making Machine. Specifications: Machine Description Automatic Incense Stick Making Machine ( Fully Automatic) Model CF IST-15 Machine Speed 250 Stroke per minute Counting 8â?� - 950 to 1000 pieces & 9â?� - 850 to 900 pieces Dia Single dia S.S.304 Power required 1 HP (three phase or single phase) Production Capacity 70 to 80 kg per shift Length of incense Stick 8- 9 Inch Overall Dimension 380mm x 600mm x 520mm Warranty 9 Months Guarantee 1 Year ( Motor, AC Drive, Sensor ) Feeding Hoper SS 304 Cylinder CI metal with hardening Piston EN 19 Stand Square pipe 40mm x 40mm
We ultra febtech - an iso 9001:2008 certified company engaged in manufacturing of air classifier mill manufacturing to grinding machinery.Air classifier mill is used for size reduction in desired particle size. The air classifying mill is screen less. The system consists classifier where the fine particles of desired size are segregated. We have established a note worthy status among the ultra air classifying mill manufacturers in india. We bring for the clients air classifying mill of exceptional quality at cost-effective price. -
This machine is a feeder of filling and transportation operation which can save a lot of labor. This machine can be set to control the filling operation when the material is full then the operation will be stop and when the filling is empty, the filling operation will be resume automatically. Feeder height can be customized to cope with the processing needs.
Automatically eliminate the dust remaining on the board, to improve the quality of coating. With the strong power air feeder, and the dust accumulation is special designed, make the rate of clearing the dust high. Configuration of gas mouth with high pressure, it can be better to clear away the subtle dust on the surface of the board.
This machine is designed for smooth the surface of the board after curtaining and also it can have the water paint to dry. Using the infrared heating theory, it can accelerate the volatilization of the attenuant of the paint and shorten the time for drying. Temperature can be controlled between 0-150â?? with temperature control device.
Double-roller Color Coater This machine is available to color the wood piece of the furniture board and it can be also used for the water paint coating. Combine with the brushes, it will make the wooden hole more outstanding and three-dimensional sense. The sponge roller with deep pores and strong adsorption capacity.
This machine is available to the base, surface paint coating for the furniture, floor, cabinet, walling, decorative boards which with high gloss. It also suitable to different material such as wood, plastic, metal, glass and so on. Convenient to adjust the thickness of the paint, which minimum could be 0.06mm. This movable curtain head with precision structure to control and convenience to clean. The paint supply system is produced in usa with high power pumps which best to vanish the bubble. Also in the pipe line it is structured professionally with the bubble disappearing device, to ensure the uniformity of the paint with no defects. It can be curtained with the pu, uv paint.
Double-lamps uv dryer / three-lamps uv dryer This machine is available to the work piece coat after the uv paint and dry in a short time. It has cooling fan with well ventilated inside the separate lamp box, it also has type of high-power exhaust design that can extend the service life of the uv lamp, transformer and capacitor. It can be choose with the plc, precision automatic flip and separate electronic box.
-suitable for the materials which can hang on the turntable plate -could match with the tapping machine, riveting machine, robot arm and so on, it save a lot of labor cost and time. -save a lot of floor space.
Major strength of nsn-30 dust&airbone microbes sampler? 1.Digital-controlled:easy and precise flow adjustment(precise to 1 demical) 2. Easily calibrated:the only one dust collcter with high flow volume can be directly calibrated by soap film flowmeter 3. Specially designed:he unique vertically upward inlet guarantees all dust collected is needed in occupational health. 4. Globally innovated:with real time calculation software implanted, time to say bye-bye to manual computation 5. Widely applicated:available for the sampling of total dust&respirable dust&airborne microbes 6. Excellently performed:strong resistance to back pressure 5kpa;powerful battery5h constant run
TJSH-80T high speed press characteristic: Six round pillar high speed precious press machine Lubricating system Oil cooler or constant temperature lubricating oil(heat and cool device) machine(option) Electric die adjustment device to adjust die height (option) Advanced dynamic balance to minimized noise so as to ensure best precision and smoothness Separate control box with touch screen,easy operation,complete function and auxiliary operation key on the side of machine body. High hardness steel is widely adopted on crank,connecting rod,sleeve and newel which can afford high alloy steel sleeve and tile of shaft with high load(8Mpa) and high speed(8m/s) to reduce the load of sleeve and tile of shaft.thus,it can keep good punching precision and prolong life span. High intensity and grinding resistance alloy nodular cast iron is adopted on important cast components such as machine body,foundation,sliding block,flywheel and connecting rod etc to ensure whole machine stably and high precision. For high precision and speed, all bearings are adopted imported ones from Japan
Advantage 1,automatic baling and automatic release the bale 2,a molding roller, safe and durable 3,low fault rate and not blocked 4,it can be connected to small, low-power tractors. 5,it can be used in places with steep slopes and where access is limited to narrow passageways. 6,it can produce small bales that can be carried manually. Features 1.3 point linkage, easy to lift and pass from one place to another place 2.High efficiency, make the picking and bundling up at one time. 3.buzzer warning after one bale finished,bale density adjustable. 4.natural hemp twine, harmless to animal. 5.Each bale weights about 25kg,one hour can bale about 80-120 bales. 6.Our baler can use tractor hydraulic system or hydraulic pump on itself, these are optional.
TJSH-45T high speed press characteristic: Six round pillar high speed precious press machine Lubricating system oil cooler or constant temperature lubricating oil(heat and cool device) machine(option) electric die adjustment device to adjust die height (option) advanced dynamic balance to minimized noise so as to ensure best precision and smoothness separate control box with touch screen,easy operation,complete function and auxiliary operation key on the side of machine body. High hardness steel is widely adopted on crank,connecting rod,sleeve and newel which can afford high alloy steel sleeve and tile of shaft with high load(8Mpa) and high speed(8m/s) to reduce the load of sleeve and tile of shaft.thus,it can keep good punching precision and prolong life span. High intensity and grinding resistance alloy nodular cast iron is adopted on important cast components such as machine body,foundation,sliding block,flywheel and connecting rod etc to ensure whole machine stably and high precision. For high precision and speed, all bearings are adopted imported ones from Japan.
1.The lightweight hollow core wall panel can put 2 layers steel tendon, the diameter of the steel tendon can reach 5mm. 2.The producing table can use steel plate of concrete plate, convenient construction. 3.The easywear spareparts such as tubes and the sides die plate using alloy, greatly improved the antifraying ability. 4.The machine can use different kinds of light-weight materials, for instance, slag(cinder), ceramsite(haycite), pearlstone etc.to produce, the product with smooth surface & light-weight.
Main Features 1.Extrusion method, smooth surface 2.Simple structure,easy operate 3.Long working-life with easywear spare parts Working principle: Precast concrete H beam equipment machine is used to feed concrete into a die by means of a slide block's reciprocation along the steel tendon and compact concrete into a designed form by extrusion on a bed box in open air or a workshop, under the operation of external vibration, surface press polish, the formed concrete is completed.
Prestressing precast concrete T beam equipment is our special developed products as results of our engineers research, with witch 60% steel material will be saved compared with traditional revolving die method, effciency can be improved 3 to 5 times compared traditional method, those machine are easy for operation and convenient for maintenance, products from these machines are in good quailty, smooth appearance and accurate in size.
