Three Lamps Uv Dryer

Instantaneous drying, saving time and high production efficiency. It can achieve high gloss, friction resistance and solvent resistance. Conveyor belt has no pole speed regulation and anti-offset device to ensure smooth conveying. The imported Teflon mesh belt has stable and adjustable conveying speed and can be easily connected with production line and other equipment. Each set of UV system is independently controlled, according to the number of production lights. With special Al-Mg alloy lampshade and concentrating design, the production efficiency is high.

1. This machine is avalible to drying UV paint after painting to dry quickly. 2.It has cooling fan with well ventilated inside the separated lamp box, it also has type of high-power exhaust design that can extend the service life of the UV lamp, transformer and capacitor. 3.It can be choose with the PLC, automatical elevator, separate electronic box and more automatical choosing outfil. 4. This machine is used in drying UV putty, transparent primer, top paint and some other UV paint. Which could be control according the performance of paint. 5. The machines function is drying the paint film in a moment; it’s suitable for production line. Which can raising the production efficiency and reducing human sources and solving some problem which appearance in traditional process. 6.It suitable for 100% drying primer of wood, MDF, melamine board, PMMA, aluminum and PVC board. Effective working width 0-1320mm Effective working thickness: 2-80mm Min length of item 300mm Conveyor speed 0-20m/min Energy 100-300mj/cm2 Power 24KW Machine size 1850mm1850mm1750mm

Usage: UV curer dry UV varnish printed on paper, board, metal sheet, PCB, automobile, shoes, PVC, plastic such thin products, inks will not come off from article after drying by UV curing machine. UV dryer can do spot UV, theory is light up the UV lamp in flash high voltage condition in order to ultraviolet shine on the surface of product and let UV varnish and inks dry quickly. Specification: HC-AUVD-1978 UV curing machine 1) Max curing size:19.6*2.3 inch (500*60mm width*height) 2) Conveyor length: 78.7 inch (2000mm) 3) Speed: 0~12M/MIN Stepless speed regulating 4) Conveyer material: Teflon 5) Lamp power: 3KW/380VÃ?2pcs 6) Motor power: 1000W/1P/380V 7) Fan power: 500W/380V 8) Total power: 7KW 9) Net weight: 300KG. HC-AUVD-3178 UV dryer 1) Max curing size: 31.5*2.3 inch (800*60mm width*height) 2) Conveyor length: 78.7 inch (2000mm) 3) Speed: 0~12M/MIN Stepless speed regulating 4) Conveyer material: Teflon 5) Lamp power: 3KW/380VÃ?2pcs 6) Motor power: 1000W/1P/380V 7) Fan power: 500W/380V 8) Total power: 7KW 9) Net weight: 330KG.

After more than 20 years of exploration and research and technological innovation, ZJN Company has developed the "Rotary Harrow Rolling Three-stage Multi-loop" and "Automatic Rake-turning Segmental Combined" three-cylinder dryer, which is currently technically advanced in the drying field, with obvious technical advantages and practical effects. 1. The air volume, wind speed and wind direction can be controlled. According to the needs of materials, the air volume, wind speed and wind direction of each drying stage can be scientifically designed, while the single drum dryer does not have this function. 2. High utilization rate of heat energy. The three-stage dryer adopts a sleeve inlay type, and the speed reduction drying and the constant speed drying can be carried out at the same time with less heat loss; Wonderful design of rotary rake and turning rake makes the material spread more fully and suspend more evenly, maximizing the contact surface with hot air and doubling the drying efficiency. 3. The design of water vapor discharge is reasonable. The three-cylinder dryer adopts three-stage discharge for the evaporated water vapor. The materials are dried in stages, and the drying rate is dynamic, while the single-cylinder dryer adopts one-stage discharge, and the materials go through the whole process at the same drying rate. 4. The way of transportation is peculiar. The three-cylinder dryer is horizontally placed, and after special material guiding design, the travel of materials in the equipment is artificially controllable, and can be prolonged several times or even tens of times according to requirements, so that the storage amount of materials is large; while the single-cylinder dryer needs to be placed obliquely, so that the materials can naturally go through the full travel only by gravity. 5, save space, safe and durable. The three-cylinder dryer adopts the sleeve inlay design, which occupies less space (saving 60%), is convenient to install, simple to operate, stable to run, and has little power demand, which cannot be compared with the single-cylinder dryer. ZJN three-cylinder dryer enjoys a high reputation at home and abroad due to its extraordinary research and development concept, unique energy-saving design, strict manufacturing process and excellent drying effect. It completely ends the drying problems of various high humidity and high viscosity materials and is widely used in papermaking, chemical industry, printing and dyeing, electroplating, leather, pharmacy, sewage treatment, feed, brewing, starch processing, biological fermentation and other industries. This series of equipment has been put into the market for more than 1,000 units and has numerous customers at home and abroad.

Use: It use to dry LED UV ink on articles printed by screen printing, offset printing and pad printing. LED UV dryer is more and more popular Nowdays,it have 5 features compares with traditional UV dryer. 1) It saves a lot of energy/Electricity. 2) Environmental protection, because LED does not produce ozone. 3) Good for health. 4) Longer life,20000hours. 5) No need to warm up/preheat. Specification: Light source type: surface light source Control mode: button control, external control Input voltage: AC 220V, 50Hz Use lamp distance: 5mm ~ 15mm Cooling method: water cooling LED lamp hours: 20000H Number of chips: 1440 pieces Total length of the machine: 2000MM Total width: 1200MM Belt width: 1000MM Total machine height (including lampshade): 1000MM Distance between belt and ground: 850MM Effective irradiation length: 1000MM In-feed length & Out-feed length: adjustable Max height of product: 4inch Speed is adjustable: 5-35 meters per minute The machine comes with: 1pc industrial chiller, 1pc control box, LED lamp and lamp cover.

Usage: Cylinder UV cure dry UV varnish and UV ink printed on bottles, as plastic bottle and other round metal and glass material article. Bottle rotate automatically in the UV dry area to make sure UV light irradiate on bottles fully. Specification: HC-AUVD-1347 Cylinder UV dryer 1) UV system Conveyor width: 13.7 inch (400mm) 2) UV system Conveyor length: 47.2 inch (1200mm) 3) Max size of article: 13.7 inch *3.5 inch (400*90mm) 4) Speed: 1800~3000Pcs/Hr 5) Conveyor Speed: 0~10M/MIN 6) Stepless speed regulating 7) Lamp power: 4KW 8) Total power: 5KW

Sand dryers / Small dryer machine/ Construction three cylinder river sand Introduction of China high quality hot sale rotary sand dryer/drying machine for drying sand: Three cylinder dryer is a new generation of efficient, energy-saving drying machinery and equipment � with compact structure, simple structure, reasonable layout, according to the principle of work, the inner cylinder with different angles and spacing of the lifting plate and guide plate to ensure material drying under the action of gravity along the guide plate of the running track running, in the tube has sufficient residence time and good dispersity, resulting in material in the barrel and hot gas flow to fully exchange heat, increase the heat exchange area, enhancement per unit volume of evaporation amount, to complete the high efficiency and energy saving drying . Scope of application : Three cylinder drying machine apply to three cylinder structure it will make the heating time of raw material longer, reduce the heat source loss, increase the heat source and heating surface, reduce the equipment occupation, it is a highly efficient energy-saving drying equipment, suitable for drying a certain humidity, granular materials such as lime sand, viscosity sand, sand, sand, sand, river sand, artificial sand, mineral sand,  slag, blast furnace slag, cinder, slag, ore, metal powder, clay, kaolin, diatomite, perlite, granite, bauxite, gypsum, fly ash, coal, , coal, crystallization, drying light calcium carbonate and other dry materials, according to the different industries have the different aquirement for final material`s moisture , the  final drying moisture content can reach 1 - 0.5%   This machine mainly consist by lifting machine, drying drum ,transmission device, pipeline, induced draft fan, hot blast furnace, dust collector and discharger . FAQ Our company is mainly engaged in the development and manufacturing of agricultural machinery, food machinery, feed machinery, wood machinery, coal machinery and other machinery.

Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd. was founded in 1991. It is a high-tech company engaged in the development of new solid waste drying technologies and new processes, as well as the general contracting of projects and equipment operation management services. After more than 20 years of exploration and research and technological innovation, ZJN Company has developed the "Rotary Harrow Rolling Thriple-stage Multi-loop" and "Automatic Rake-turning Segmental Combined" three-cylinder dryer, which is currently technically advanced in the drying field, with obvious technical advantages and practical effects. 1. The air volume, wind speed and wind direction can be controlled. According to the needs of materials, the air volume, wind speed and wind direction of each drying stage can be scientifically designed, while the single drum dryer does not have this function. 2. High utilization rate of heat energy. The three-stage dryer adopts a sleeve inlay type, and the speed reduction drying and the constant speed drying can be carried out at the same time with less heat loss; Wonderful design of rotary rake and turning rake makes the material spread more fully and suspend more evenly, maximizing the contact surface with hot air and doubling the drying efficiency. 3. The design of water vapor discharge is reasonable. The three-cylinder dryer adopts three-stage discharge for the evaporated water vapor. The materials are dried in stages, and the drying rate is dynamic, while the single-cylinder dryer adopts one-stage discharge, and the materials go through the whole process at the same drying rate. 4. The way of transportation is peculiar. The three-cylinder dryer is horizontally placed, and after special material guiding design, the travel of materials in the equipment is artificially controllable, and can be prolonged several times or even tens of times according to requirements, so that the storage amount of materials is large; while the single-cylinder dryer needs to be placed obliquely, so that the materials can naturally go through the full travel only by gravity. 5, save space, safe and durable. The three-cylinder dryer adopts the sleeve inlay design, which occupies less space (saving 60%), is convenient to install, simple to operate, stable to run, and has little power demand, which cannot be compared with the single-cylinder dryer. ZJN three-cylinder dryer enjoys a high reputation at home and abroad due to its extraordinary research and development concept, unique energy-saving design, strict manufacturing process and excellent drying effect. It completely ends the drying problems of various high humidity and high viscosity materials and is widely used in papermaking, chemical industry, printing and dyeing, electroplating, leather, pharmacy, sewage treatment, feed, brewing, starch processing, biological fermentation and other industries.

After more than 20 years of exploration and research and technological innovation, ZJN Company has developed the "Rotary Harrow Rolling Three-stage Multi-loop" and "Automatic Rake-turning Segmental Combined" three-cylinder dryer, which is currently technically advanced in the drying field, with obvious technical advantages and practical effects. 1. The air volume, wind speed and wind direction can be controlled. According to the needs of materials, the air volume, wind speed and wind direction of each drying stage can be scientifically designed, while the single drum dryer does not have this function. 2. High utilization rate of heat energy. The three-stage dryer adopts a sleeve inlay type, and the speed reduction drying and the constant speed drying can be carried out at the same time with less heat loss; Wonderful design of rotary rake and turning rake makes the material spread more fully and suspend more evenly, maximizing the contact surface with hot air and doubling the drying efficiency. 3. The design of water vapor discharge is reasonable. The three-cylinder dryer adopts three-stage discharge for the evaporated water vapor. The materials are dried in stages, and the drying rate is dynamic, while the single-cylinder dryer adopts one-stage discharge, and the materials go through the whole process at the same drying rate. 4. The way of transportation is peculiar. The three-cylinder dryer is horizontally placed, and after special material guiding design, the travel of materials in the equipment is artificially controllable, and can be prolonged several times or even tens of times according to requirements, so that the storage amount of materials is large; while the single-cylinder dryer needs to be placed obliquely, so that the materials can naturally go through the full travel only by gravity. 5, save space, safe and durable. The three-cylinder dryer adopts the sleeve inlay design, which occupies less space (saving 60%), is convenient to install, simple to operate, stable to run, and has little power demand, which cannot be compared with the single-cylinder dryer. ZJN three-cylinder dryer enjoys a high reputation at home and abroad due to its extraordinary research and development concept, unique energy-saving design, strict manufacturing process and excellent drying effect. It completely ends the drying problems of various high humidity and high viscosity materials and is widely used in papermaking, chemical industry, printing and dyeing, electroplating, leather, pharmacy, sewage treatment, feed, brewing, starch processing, biological fermentation and other industries. This series of equipment has been put into the market for more than 1,000 units and has numerous customers at home and abroad. The equipment has been sold to more than 20 provinces and regions in China and more than ten countries and regions such as India,