- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg
Edge-banding machine EXPERT - 4600 Technical characteristics Voltage/frequency 380 V /50 Hz Amperage 22 A Width of edge band 0.4 - 3 mm Width of the worked wood pieces 10-50 mm Feeding speed 10-20 meters/min. Total power 12,4 Kw Pressure in the machine 6 atm Air consumption 240 lt/min Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz Speed of sawing unit 4750-5250 dev/dk Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm Milling unit speed 2 x 0,55 Kw / 18000 Rpm Back channel opening 1,1 Kw / 2800 Rpm Polishing motor 2 x 0,18 Kw / 1400 Rpm WHY EXPERT 4600 Standard equipment All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor. Wide table designed for wide edge-band coils Pneumatic cutter designed to cut bands up to 3mm. Optionally the machine can be equipped by personal computer system. PLC monitor is easy to use. All the functions can be entered quickly and comfortably. Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers. SCRATCHING GROUP It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically. BACK CHANNEL CUTTING UNIT t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen. POLISHING GROUP It consists of two independent motors of 15000 rpm, that perform polishing work. SAFETY SYSTEMS In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen. Installation, technical service and personell education These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side. Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg
This machine is designed for the inserting of leaflets, letters, coupons into both large and small sized envelopes And is very reliable, economic and efficient. Comprising:- 4 x insert feeders 1 x envelope feeder Main control panel
Our company is specialized in producing multi-station cold heading machines, you can use the machine to product screws/bolts/rivets etc. High quality and reasonable price. We look forward to cooperating with you
Our forging branch factory can work sleeve products, flange products, ring products, profiled forgings and kinds of lift hook forgings with carbon constructional steel, tool steel, roller-bearing steel, spring steel and different alloy steel etc. Our main equipments are kinds of heavy free forging water press and free forging hammer with different tonnage. The biggest forgings from us are ++1500 ring, ++1000 flange and ++500 x 17000 shaft. There are controlled-atmosphere heat treatment production line and kinds of smelting electric furnace in our heat treatment branch factory. In this case, quenching, annealing, tempering, hardening and tempering, heat treatment etc. can be fulfilled here. We can also execute the mechnical property, chemical composition and kinds of flaw detection through precise inspection method. The tenet of our company is "Credit First, Quality First and Service First ". New and regular friends at home and aboard are welcomed to establish friendly cooperative partner relationship with our company on long term basis.
We provide world class quality as competative to italy Not aplicable
This machine is the modest sbt-500 opener with automatic backing system. It is superior than others at high effective, power saving, cotton fiber is more longer and so on. It can save 5-7degree electricity average per hour, and will not destroy fiber, also easily to mantling wire. It is our new products which can replace of wooden roll machine. Now after using in china market, it is welcomed by chinese user. Main parameter: 1outputú¦120-150kg/hour 2qty of removing impurityú¦30%-40% 3roll diameterú¦400mm 4rotation speedú¦1440r/mú¼1580/r/m 5dust baskateú¦500mm 6press cotton packú¦140*9.85 7fan machineú¦1.5kw*2900r/m 8chainú¦19.5mm 9powerú¦15-18kw 11tackrin wireú¦2mß3.5teethß8.8inch 1.65mß3.5teethß8.5inch 12.Weightú¦signgle1.2ton double2.0ton 13outside dimentionú¦signal roll:length 2350mm wide1550mm high1550mm Double roll: lengh3550mm wide1550mm high1550mm Weight13outside dimentionú¦signal roll:length 2350mm wide1550mm high1550mm Double roll: lengh3550mm wide1550mm high1550mm ú¦signgle1.2ton double2.0ton
Broadway foundry & engineering works manufactures vertical turning lathe machines.We have in stock vtl 4000 mm table dia, 4200 mm swing and 2000 mm height
(1) all jumpers and plug machine and horizontal components of the feature plug-machine (one machine multi-purpose) (2) workbench positive Product brief introduction: xg-2000 series machines, and combined machines and horizontal jumper plug-ins plug-machine functional components, the unique servo control systems, components and horizontal jumpers finish mixed plug-perfect process, efficient savings jump line usage. Perfect for high-speed high-density effect. Independent plug-machine brings you the flexibility in the deployment of production arrangements. Windows2000 english-based application software systems, user interface easy to understand, realize man-machine interface dialogue, practical experience and scientific theory bring you a combination of product quality and production efficiency. 1800mm*1600mm*1800mm, 700kg, 1.2kw
(1) led bulk feeder (optional) (2) 0 degrees -360 degrees 1 degree increments (3) positive workbench Product brief introduction: xg-3000 series machines, the latest and most practical vertical plane, an independent cycle of songs many of servo control systems, plug-ins achieve high and stable performance, to achieve the perfect high-speed high-density effect. Windows2000 english-based application software system, user interface easy to understand, realize man-machine interface dialogue, practical experience and scientific theory to bring you a combination of product quality and production efficiency. 1800mm*1600mm*2000mm, 750kg, 1.6kw
This products it adopts industral computer control, setting length on showing screen, and adjustble.Can be seted in different length and task, operation has both manual and auto, system control is easy for operate and convenient for use. This products can make two different models together profectly, and has reasonable structure, nice appearance, and features saving space, easy operate, upper and down models can be made according to customers'requests. This machine is compose of feeding table, forming machine, forming cutting device, hydraulic system, computer control system. Optional devices include manual uncoiler and hydraulic uncoiler. Packing: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipments will be moisture-proof, anticorrosive, and will not be damaged during transportation. One complete equipment need one 40-feet container to hold.
Features: Variable-speed and slow-speed control gear avoids workpiece damage. Simultaneous dehydrating and drying without stains enhance the luster level and quality of the finished products. Usages: Suitable for dehydrating and drying metallic parts that are ground, oiled, water-rinsed, or soaked with rust preventives. Necessary drying equipment for electroplating and grinding factories.
Features and Options of Horizontal Sand Mill 1. Pegs type structure design,enhancing the effect of impact and shear of grinding beads on material.The grinding effects of the product and the fineness can reach nanometer range. 2. Choice of large-flow separator for increasing the flow speed. 3. Use very small size of grinding beads to get high grinding efficiency,and to get good quality product and narrow particle size distribution. 4. The aixs and the front plate of sanding machine have a cooling system for excellent heat dissipation,suitable for abrasive grinding heat-sensitive products. 5. Assembled double-end mechanical seal,allowing choice of cooling liquid that is compatible with your materials,to avoid contamination and down-time;safe and reliable. 6.Automatic pressure protection devices,ensuring that the grinding chamber pressure stable.All-electric applicable automatic protection systems,is safer to use. Technical Parameter Model Chamber:LDM-18L Volume(L) :18 Motor Power(KW) :18.75kw Output Capacity(L/h):100-600 Media Size(mm):0.6-2.0 Gross Weight (kg) :800 Dimension(mm) :1350*900*1700 Model Chamber:LDM-25L Volume(L) :25 Motor Power(KW) :22KW Output Capacity(L/h):150-900 Media Size(mm):0.8-2.0 Gross Weight (kg) :1200 Dimension(mm) :1400*900*1800
Detailed Product Description Features and Options of Lab batches of test Sand Mill 1. Stable structure; quiet running, flexible design and simple operation. 2. Use of very small grinding media to get high quality products. 3. The capacity reached in tests may be scale up to all production mills. 4. The cylinder is easy to assembly, dismantle, and clean. Formulation can be changed rapidly. 5. The material of chamber and impellers can be ceramic material/macromolecule material/super wearable alloy steel material according to customer's requirement. 6. Ideal cooling properties. Technical Parameter Model PowerKW) Speed(rpm) Processing capacity(L) Output Capacity(kg/h) Dimmension(mm) LSM-1.4L 2.2 1200/1500/1800 4~20 20~60 560X700X680
Features and options of horizontal sand mill 1. This machine incorporating merits of all horizontal grinding machines. 2. This machine has concise outer appearance and compact structure, very convenient for operation. 3. High quality materials for impeller and grinding chamber, the parts contacting materials are high hardness super abrasive resistant materials, which ensures that products of white and pure color will not be discolored while grinding. 4. The excellent streamlining structure of blades enable grinding media to have sufficient kinetic energy, and grinding products of high quality can be produced. 5. High precision dynamic separating unit capable of self-cleaning valve gear, which is solving the problem of reduce residue in the barrel, and lengthened disassembly track under the grinding chamber, which is convenient for cleaning, changing color and replacing grinding beads. 7. Spare parts in the grinding chamber can be nonmetallic/stainless steel/pure zirconia ceramic material/super wearable alloy steel material, according to customer's requirement. 8. Electric appliance auto-control and pressure with auto-feedback system for safety. Technical parameter Model chamber volume(l) motor power(kw) output capacity(l/h) media size(mm) gross weight (kg) dimension(mm) Lsm-5l 5 7.5 50-150 0.4-2.0 450 900x700x1550 Lsm-15l 15 15 80-400 0.4-2.0 650 1180x900x1600 Lsm-20l 20 18.75 100-600 0.6-2.0 800 1350x900x1700 Lsm-30l 30 22 150-900 0.8-2.0 1100 1400x900x1850 Lsm-50l 50 37.5 220-1200 0.8-2.0 1500 1750x900x1950 Lsm-100l 100 75 300-2400 1.2-2.0 2800
Features and Options of our Dispersing Machine. 1.High-shear dispersing impellers, good dispersion effect and safety, good dispersion effect by shearing strength around the gear plate, enabling products to be wet and dispersed efectively. 2. The products are accelerated in radial directioin via dispersion plate, flow to the top and bottom part on the inner wall of the cylinder and return to dispersion plate, enabling materials to be well stirred. 3. Uses latest frequency inverter, giving various speed control. 4. Manual control for rotation through 300 degrees, so that material barrel of different directions and positions can be mixed simultaneously(Optional). 5. Bracket structure, giving more safety while mixing(Optional) Technical Parameters Model Dispersion Power (KW) Lift(mm) Speed(r/min) Disc Size(mm) Mixing Capacity(L) Gross Weight(kg) Dimension(mm) LFS-5HP 3.75 800 1500 180 100-200 750 1630x500x1555 LFS-10HP 7.5 1000 1500 250 200-400 980 1700x500x1680 LFS-15HP 11 1000 1200 280 400-600 1120 1750x500x1700 LFS-20HP 15 1100 1100 300 600-1000 1410 2015x600x1765 LFS-25HP 18.50 1200 1000 330 800-1200 1720 2050x650x1800 LFS-30HP 22 1200 1000 350 1000-1500 1860 2050x700x2200 LFS-40HP 30 1400 1000 380 1200-2000 2580 2100x800x2300 LFS-50HP 37 1400 900 400 1400-2500 2740 2200x900x2500
Wire stitching machine Method wire stitching machine model ebm2000 automatically staples the manually fed printed exercise book cover and ruled paper sheets, folds it and rolls it to form finished exercise books. Machine size : 4.3 x 0.9 x 1.7 meters, in export packing.
Inside worktable size:w1320*l2290 Outside worktable size:w1200*2290 Cutting height h800/1200mm Paper and film
Simple to use Extremely short process times Inside and outside polishing frequently possible High-precision chamfering No damage to your work pieces, because the parts do not touch Highly effective and efficient Rapid retrofitting of clamping devices allows for several batches to be processed Time and cost savings due to simple handling technology Maximum flexibility Short setup times . MFD 300 Dimensions approx: 2000 x 1300 x 2200 +450mm Weight approx: 750kg.
The MF 22 is equipped with a tried-and-tested ceramic-ring setting system, available optionally as a 1, 2, 3 or 4-container system, each with a 22 liter container. Special versions, for instance, such as 6 to 8-container systems are also feasible. Features a modular design ideal for processing precision components. Easy handling, trouble-free operation. Width = 58 cm Depth = 99 cm Height = 149 cm 22 Liters 110 kg 0,85 kW 230 Volts.
