Grinding machine
List of theoretical Prodrction Capacity Specification of production Number of blocks per pallet Piece/1hour Piece/8hour Pieces/300days (twoswitch) Hollow Block 390*190*190 10 2,400 19,200 11,520,000 Multicelular Bricks 240*115*90 24 5,760 46,080 27,648,000 Paving Bricks 200*100*60 36 8,640 69,120 41,472,000 Standard Bricks 240*115*53 52 12,480 99,840 59,904,000 Technical Data Moulding Number 10bricks/mould(390*190*190) Pallet size(mm) 1080*900mm Cntrol system PCL auto computer control Double shifts annual output Block 140 thousand m3 Color brick 450 thousand m2 Circle time(s) 15-20s Installed capacity(kw) 32kw
Function & assemble parts 1. Modularize group production line: base on dk8/10/12working-table vibration and mould vibration series block making machines as the main machine. We can form production line with single main machine or two main machines. Besides, we also can form production line by different types of main machines to satisfy different scale of investment. Different productionf+s performance specification request, the height from 50mm to 250mm, and the work area is 1280*880mm, production cycle from 15 to 25 seconds. 2. Adopt advanced technology from abroad, combine with ten years experiences, developing and innovating. 3. Advanced performance, widely used, steady and reliable quality, convenient to operate and maintain. 4. The completely production line adopts intelligentize integration system to control, through cc-link network or center assemble line to transmit data, monitor and control every part with quick, accuracy, real time characteristic, fault alam, can finish telenet visit, make the manufacture factoryf+s easy to adjust program, set the parameter, amend and upgrade system. 5. Mostly main part components and element all adopt the international famous brand, such as nsk bearing, japanese yuken brand turning valve.Mitsubishi plv and transducer, omron sensor. So guarantee the dependability and stability of the whole production line to operate continuously with two shift one day. Technical data 1. Height of curing room: 5700mm 2. Workshop standard height:8000mm 3. Equipment max.Height:5600mm 4. Installation area of equipment:approx600+o 5. Area of curing room: approx700+o 6. Working area of whole production line:1300+o (xclude material yard and block yard) 7. Power: 160-180(kw) 8. Total weight:120-130(t) 9. Annual output(two shifts):80000-180000m3
This kind of machine is a new generation of foil stamping series on the basis of tym1020, ití»s incorporated with fully automatic feeding, diecutting, stamping, delivering foil, delivering sheet, up-press, down-press, leap step, counting, heating, pre-heating, obstacle indicating, checking and measuring. It has the features of easy operating, reliablity, high speed, press and precision. Model 1020 Max. Paper size 1020x720mm Min. Paper size 400x360mm Max. Cutting size 1010x710mm Max. Foil stamping size Longitudinal 970x685mm Lateral 960x600mm Foil-conveying shaft quantities Longitudinal 3 pcs Lateral 2 pcs Max. Length of foil conveying Longitudinal 700mm Lateral 970mm Quantities of heating areas 12pcs Heating temperature 0íµ-190íµ(adjustable) Max. Foil diameter ª¦195mm/3" ª¦100mm/1" Thickness of paper Cardboard 0.1-1.5mmú¼ Corrugated paper ín4mm Max. Cutting speed 6500s/h Max. Stamping speed 5000s/h Total power 46.5kw Pressure 250t Net weight 18.5t Overall dimension 5470x3940x2585mm
The machine uses programmable controller and interface, showing the working speed, number of sheet processed, the general running time and various troubles, which contributes to easy troubleshooting and operation. The main motor is controlled by transducer, thus achieve stepless speed regulation and smooth operation. The machine is equipped with many sensors and safety devices, which makes possible normal operation by machines and safe running by operators.Reasonable structure with fine assembly ensures the machine with short feeding distance and high die-cutting accuracy and can die cut jobs without gripper margin. Mode 1450 Die-cutting ways flat to flat Max. Paper size 1450x1060mm Min. Paper size 550x500mm Max. Die-cutting size 1445x1045mm Max. Die-cutting pressure 250n/cm¬˜ Paper processed cardboardú¦200-2000g/m¬˜ú+ Corrugated paperú¦íG8mm Max. Die-cutting speed 4000sheets/h Min. Gripper margin 7mm Max. Height of feeding pile 1400mm Max. Height of delivery pile 1200mm Die-cutting precision í+0.25mm Power of main motor 11 kw Total power 13.5kw Weight 16t Dimensions 4200x2300x2200mm
1ú«automatic feeding of bottom sheet. 2ú«normal front feeding of top sheet designed to make the feeding more convenient and lamination more accurate. 3ú«with flexible front positioning which avoid bottom sheet exceeding the top sheet and adjustable fore-and-aft lamination between bottom sheet and top sheet. 4ú«suitable for lamination of paperboard to bottom paperboard above 300g/m¬˜, and to a/b/c/d/e flute corrugated cardboard, and corrugated cardboard to corrugated cardboard. 5ú«movable lengthened pressing part is alternative for lamination of corrugated cardboard thicker than flute-b whose length is above 800mm. 6ú«pressure-adjustable pressing part is alternative for lamination of paperboard to paperboard Model 1000e 1300e 1450e Max sheet size(mm) 1000í+1100 1300í+1100 1450í+1100 Min sheet size(mm) 320í+450 320í+450 320í+450 Total power(kw) 7 7 7 Speed(m/min) 0-90 0-90 0-90 Weight(t) 3.2 4.2 5.2 Machine size(mm) 6970í+1570í+1500 6970í+1870í+1500 6970í+2100í+1500 Dimension(lí+wí+h)(mm) 8070í+1570í+1500 8070í+1870í+1500 8070í+2100í+1500
Features: CK6125f=CK6125-1 type CNC controlled lathe is used to turning inner outer cylindrical surface, end surface, taper surface and thread of shaft etc., with highly efficient and precision working. The Tools is adopted gang-type tool apron, Turning tool can be fitted 4-6, it also can be fitted 4 position motor compound rest according to customers requests. The CNC control is adopted with Beijing KND-100T system or Guangzhou CNC 980TA/TD and be fitted with different CNC system according to customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning. The machine tool adopted sliding guide ways. X and Z axes leading screws are adopted 2 gradation accuracy ball screws, the accuracy of leading screws is most high grade in domestic made in HANJIANG screw & guide works. The leading screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation, with this result supporting rigidity increase, and raise turning stability. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically. The machine tool is protected entirely closed, compact construction, with small area. CK6125 the spindle supporter are adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),CK6125-1 the spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. They can be acquire to optimize compound with high precision, high rigidity, high load bearing ability and turning speed. The machine tool has been fitted hydraulic tank, it is adopted hydraulic-clamping collet chuck device (or CK6125 can be fixed »135 chuck with through hole; CK6125-1 can be fixed »160 chuck with through hole), can be fixed feeding support device in the form of weigh or hydraulic support device of automatic feeding, and so it adapts process automation. If it not suitable for you, you may go to our website pngindustrial.com to find out which you like type machine. Gross weight of machine: 1.5T Net weight: 1.34T Size of packing(L*W*H): 1800*1420*1860mm
Winding machine Easy to learn and operate. No maintenance. One time investment life time income.
Model: ESCX-1400 Mold Size: 1400*1200 mm Max. Product Size: 1360*1160 mm Max. Product Height: 350 mm Power: 11.5 kw Max. Contour Dimensions: 3900*2300*3800 mm - quick pressurized filling & interval filling - large steam inlet & outlet to shorten molding cycle - revolving steam conveying instead of rubber pipe make it more reliable - fast mould change (around 20 min.) - ball blast descaling, mould cavity coated with aluminium Other available model(s): ESCX-680/790/810/812/1200/1600/1800/2000
Model: ESFH-7 Producing Speed: 0-4.05 m/min (stepless computer control) Product Width: 1000 mm/1200 mm Product Thickness: 50-300 mm Power: 32 kw Voltage: AC 380V, 50-60 Hz Max. Contour Dimensions: 45000*3000*2800 mm Annual Output: 600,000 m2 Including Parts: Uncoiler, Forming machine, Compounding system, Cutter Other available model(s): ESFH-5/6
Model: ESHS-1250 Capacity: 30 m3/h Total Power: 25 kw Max. Contour Dimensions: 1480*1380*1520mm 1820*500*1300mm 2100*750*1100mm
Chemical analysis: Fe: 70% basis Al2o3: 4% max Sio2: 4% max P: 0.12% max S: 0.12% max Physical: 0-10mm 90% min +10mm 10% max Moisture: 5% max Container / carrry bag contain 50kg each
NAME: automatic core blower machine MODEL:PN1AO2S Function and Technology Parameters: 1.Device:control by PLC 2.Running:air pressure transmission 3.Operation functions: manual, self-motion, automatic(enclose conveyer belt) 4.Power:heat power can be regulated, and single side of the calefaction pipe is:6 piecesí-1200W 5.Two kinds of quartzite can be optional :cover velum colophony quartzite and furan colophony quartzite 6.Electricity calefaction: automatic constant temperature(either moving model or static model can control temperature alone) 7.Die cleaning function 8.Die engage moving path:300mm 9.Ejector moving path:30mm(moving model: mechanism; static model :air pressure transmission) 10.Core taker function:150mm by standard, and can be regulated 11.the maximum center distance of the sand shooter :320mm 12.Front and Behind exits 13.set up the floodlight in the machine 14.Working pressure by air pressure transmission:0.5~0.7mpa 15.Theoretical time in a whole operation:36~60 seconds 16.Theoretical maximum weight of sand core:4000g 17.the standard of the machine:3130*1145*2070mm wooden package
Model: pg-435, pg-650t/63 Cutting force: 35tons, 50tons Volume: 2330*1320*1260mm, 2330*1320*1260mm Cutting area: 610*1660mm, 610*1660mm Motor: 3hp, 3hp Stroke :55-245mm, 55-165mm Double-acting oil cylinder, precise four pillars auto balance link mechanism. Wooden case
For use in textile/spinning/weaving mills and dyeing houses Wide range of sizes available
Input power 1.5kw Input voltage í=3, 380/220vac Production efficiency 150 bottle/min Size of host machine 2100l*850w*2000h Applicable diameter of bottle body º¦28 mm-º¦125mm Applicable length of label 30 mmí½250mm Applicable thickness of label 0.03 mmí½0.13 mm Applicable internal diameter of paper tube 5ísí½10ísadjust it at will Wooden case
List of theoretical Prodrction Capacity Specification of production Number of blocks per pallet Piece/1hour Piece/8hour Pieces/300days (twoswitch) Hollow Block 390*190*190 6 1,440 11,520 6,912,000 Multicelular Bricks 240*115*90 15 3,600 28,800 17,280,000 Paving Bricks 200*100*60 21 5,040 40,320 24,192,000 Standard Bricks 240*115*53 30 7,200 57,600 34,560,000 Technical Data Moulding Number 6bricks/mould(390*190*190) 15bricks/mould(240*115*90) Pallet size(mm) 860*680mm Control system PCL auto computer control Double shifts annual output Block 80thousand m3 color brick 200 thousand m2 Circle time(s) 15-20s Installed capacity(kw) 23.5kw
Laptop
The machine is designed for welding anodes to the leadframe by laser. The machine ensures automatic loading of the carrying strip with anodes, cutting the anodes off, anode straightening, leadframe unwinding, leadframe cutting , silver paste application, checking the silver paste quantity, check hole punching, anode welding to the leadframe, furnace hardening and unloading the ready leadframe on the lay.
Gypsum board production line Our compnay mainly manufacture gypsum board and powder production line.We can supply all capacity what do you need.And supply top quality machine.Give you special price.We are the reality manufactuer and the biggest manufacture in china. The board line capacity:from 1 million sq.M to 30 million sq.M per year The powder line capacity from 10000 tons per year to 1000000 tons per year. Wooden box
