Description Rust Converter: is a supreme product that converts rust. Halts existing rust and prevents future corrosion with a durable protective barrier Application - Structures - Automobiles - Machinery - Tools - Use it on a multitude of applications Technical Information - Non corrosion - Does not affect the adhesion force between reinforcement and concrete - Steel storage time after treatment with Rust Coverter: + 6 months for normal environment + 1 month for marine and industrial environment - Drying time is 1-2 hours and completely dry after 24 hours Application steps - Steel surface before being treated should blow away dirt, dry and free from grease - Spray onto the steel surface to be treated. Spray 2 coats. Each spray is 20-30 minutes apart - Work in dry conditions. Avoid direct contact with water or rain when the product is not completely dry (Completely dry product after 24 hours) Important Note If the product is in direct contact with water or rain when the product is not completely dry then will create white salt on the surface of the steel bar. This salt does not affect the properties of steel, concrete. Conducting water spray to wash white stains on the surface of the steel bar and let it dry and then apply the next steps Storage Conditions Product must be stored in original, unopened and undamaged sealed packaging in dry conditions Colour Dark Green Shelf Life 18 months from date of production Consumption - Steel has not been rusty: 1 litre Liquid approximately 10-12m2 - Steel has been rusted: 1 litre Liquid approximately 6-10m2 Packaging - Rust Converter - 0,45kg(0,375L)0,099Gal - Rust Converter - 3kg(1,875L)0,496Gal - Rust Converter - 6kg(1,323Gal)5L
1. PRODUCT OVERVIEW VHF finger expansion joint made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), includes 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D354292 (2003) standards VHFC and VHFO are integrally manufactured with high accuracy finger plates and accessories such as bolts, rubber sheet/water prevention steel plates which help facilitate new construction and installation as well as inspection and maintenance works in service. VHFC and VHFO accommodate to medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate to medium and large longitudinal movements, and also vertical and transversal movement if any. Simple installation, maintenance and replacement, which allows to replace individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the moving load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to be compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PUbased painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. DIMENSIONS OF FINGER EXPANSION JOINT VHF-C15 ~ VHF-C30 (WITHOUT BOLT) MODEL DISPLACEMENT d A D C H min max min max VHF-C15 15 22 190 205 25 40 300 150 VHF-C20 20 22 230 250 30 50 300 150 VHF-C30 30 25 245 275 30 60 300 150
1. PRODUCT OVERVIEW VHM joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with supporting beams and special structural accessories. VHM - modular expansion joint accomodates to longitudinal movement from 160mm and above. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serves as drainage trough and protect the system from dust and debris. 2. PRODUCT CHARACTERISTICS : Design and manufacture according to AASHTOLRFD, TCVN 11823 â?? 2017 standards. : Allow longitudinal movement of up to 720mm, vertical and horizontal movements are in accordance with AASHTO standards. : Be able to withstand high load with stable and durable structure. : Ensure level and smooth surface for traffic. : Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue limit C (AASHTO 2007). : Protected with high anti-corrosive coating layer and treated with anti-slip coating technology. : Totally watertight. 3. TECHNICAL PARAMETERS. MODEL DISPLACEMENT MM A C MM D H MM MM MM MIN MAX MIN MAX VHM - 160 160 160 320 360 40 200 350 VHM - 240 240 240 480 420 40 280 350 VHM - 320 320 320 640 500 50 370 350 VHM - 400 400 400 800 580 50 450 350 VHM - 480 480 480 960 640 60 540 350 VHM - 560 560 560 1120 700 60 620 350 VHM - 640 640 640 1280 800 60 700 350 VHM - 720 720 720 1440 880 60 780 350 4. PROPERTIES OF SEAL A. BEARING AND SPRING NO. ITEMS UNIT REQUIREMENT STANDARD 1 Hardness Point 60 �± 5 ASTM D2240 2 Tensile strength, min Mpa 15.5 ASTM D412 3 Elongation at break, min % 350 ASTM D412 4 Deformation in Ozone, (content of Ozone in the air: 100pphm, 20%. Deformation at 38�°C x 70h No crack ASTM D1149 5 Heat resistance (100�°C x 70h) Change of hardness, max Point 0~15 ASTM D573 Change of tensile strength, max % -15 Change of elongation, max % -40
We - An Nam International Co., ltd - We take the liberty of introducing ourselves as the company which is specialized manufacturing various incense making machine. Our different various incense making machine we explain as follows: (contact with us as information Ms Bach: zero zero eight four nine three five zero two seven one two four) * INCENSE STICK MACHINE. * CONE INCENSE MACHINE * INCENSE MAKING MACHINE * BIG INCENSE MAKING MACHINE * DHOOP INCENSE MAKING MACHINE * DRY INCENSE MAKING MACHINE * AUTO FEEDER (USING FOR INCENSE MAKING MACHINE) This machine not only can replace traditional manual manufacturing but also can increase the production capacity and make products have a good looking. Your inquiry is welcome, we are glad to serve you at any time. For any further information feel free to contact us. We hope for our smooth cooperation!
We - An Nam International Co., ltd - We take the liberty of introducing ourselves as the company which is specialized manufacturing various incense making machine. Our different various incense making machine we explain as follows: (contact with us as information Ms Bach: zero zero eight four nine three five zero two seven one two four) * INCENSE STICK MACHINE. * CONE INCENSE MACHINE * INCENSE MAKING MACHINE * BIG INCENSE MAKING MACHINE * DHOOP INCENSE MAKING MACHINE * DRY INCENSE MAKING MACHINE * AUTO FEEDER (USING FOR INCENSE MAKING MACHINE) This machine not only can replace traditional manual manufacturing but also can increase the production capacity and make products have a good looking. Your inquiry is welcome, we are glad to serve you at any time. For any further information feel free to contact us. We hope for our smooth cooperation!
Qli Dual Cable Crossover Machine supports users to perform various exercises that target arm, chest, and leg muscles safely and effectively. An integrated multiple-exercise design on a machine will help users optimize both time and cost.
A. Specification: 1. Input Voltage (V): 1 phase 220V ± 15% (50Hz/60Hz) 2. Power Output (KVA): 7.0 3. Output Intensity (A): 10 - 200 4. Output Voltage (V): 50 - 70 5. Efficiency: 85% 6. Weight (Kg): 7.7 7. Welding stick (mm): 1.6 - 3.2 8. Tungsten Electrode (mm): 1.6 â?? 2.4 9. Welding materials: Iron, Copper, Stainless steel, Aluminum B. Payment term: T/T in advance or L/C at sight (FOB Ho Chi Minh Port). C. Delivery time: 60 days after advance payment date. D. Minimum Order Quantity: 1000 unit/shipment Hong Ky can do ODM as client's requirement. Please contact us for more detail.
1. Input Voltage (V): 1 phase 220V ± 15% (50Hz/60Hz) 2. Power Output (KVA): 7.0 3. Output Intensity (A): 20 - 200 4. Output Voltage (V): 50 - 70 5. Efficiency: 85% 6. Weight (Kg): 6.6 7. Welding stick (mm): 1.6 - 3.2 8. Accessories: 3 meters of welding wire, 2 meters of wire mass
