The Trimble TSC7 Controller is optimized for Trimble Access field software and features Windows 10 Pro. It can run Microsoft Office, web browsers and other third party apps, so you wonâ??t need to carry around a laptop. The TSC7's combination of hardware and software allow for higher productivity out in the field, meaning you get the job done sooner with fewer interruptions. The powerful Intel Pentium processor along with 8GB of RAM allows the TSC7 to manage large project files, complex imagery, point clouds, and other 3D data with ease. Plus, youâ??ll have 64GB of on-board storage for saving all of your files.
Trimble TSC7 Controller with Trimble Access field software combines the power of a tablet, laptop, and survey-rugged design into one device. This powerful combination unleashes the unlimited potential for your workflow.
Redesigned from the ground up, the Trimble TSC7 Controller with Trimble Access field software combines the power of a tablet, laptop, and survey-rugged design into one device. Bringing the latest in field technology, this powerful combination of hardware and software unleashes a competitive advantage for how you survey in the field.
Big screen. Giant potential. A bigger screen, powerful processing and Windows 10 mean youâ??re carrying all the possibility of a laptop right in the palm of your hand.
Key Features:
Optimized for Trimble Access field software
Large 17.78 cm (7-inch) multi-touch screen for finger or stylus
Sunlight readable display
Secure Windows 10 Pro operating system
Compatible with Microsoft Office, web browsers, and other third-party apps
Manages large project files, complex imagery, point clouds, and other 3D data
Intel Pentium processor with 8 GB RAM and 64 GB internal memory
Comprehensive connectivity options
Front- and rear-facing cameras
Backlit keypad with customizable button commands
User-interchangeable EMPOWER modules, including a long-range radio
Military-spec rugged design, engineering, and performance
Ergonomic form factor
Hot-swappable batteries with LED indicators
Trimble GFX-350 is using the same Precision-IQ platform and Android operating systems with offering easy-to-use functionality and simplified installation.
The Trimble GFX-350 display is the most compact display from Trimble Agriculture, perfect for a non intrusive installation in vehicles large and small, including ATVs. Easy to install, this display is built to withstand weather conditions and the tough environment associated with agriculture, whilst bringing modern functionality with an Android operating system, Precision IQ guidance and built in WIFI. The GFX 350 is a perfect introduction to Trimble devices and allows you to configure as you see fit, using its modular licensing and hardware compatibility, its your ideal partner for now and in the future.
The Trimble GFX-350 is the latest Android -based, easy-to-use display from Trimble Agriculture. This cost-effective solution offers great functionality and a simplified installation process, providing access to autosteering and application control for every farm.
Add in Bluetooth and Wi-Fi connectivity to go along with ISOBUS compatibility and any grower can tackle farming applications from every season across all equipment brands.
Features:
Touchscreen with Android operating system for simple navigation
Save your own list of clients, farms and fields for easy task recording
Auto sort fields on distance, making the closest always at the top of the list
Virtual section and rate control allows increased monitoring on manually controlled implements
Modular design for cleaner installation and simple removal, quicker to transfer between machines
Compatible with most implement control types including ISOBUS
Include:
GFX 350 Touchscreen Display
Ram Mount Kit
Nav 500 GPS Receiver with Mounting Plate
Power Cable For GFX 350 Dislplay
Standard Connection Cable for Nav 500
The Cynosure Acclaim Aesthetic laser is a solid state Nd:YAG laser that is effective for laser hair removal on all skin types which includes tanned Skin. Nd:YAG is considered the gold standard for dark skin hair removal been both safe and effective.
The Acclaim 7000 Nd:YAG laser allows you to expand your practice by offering cosmetic procedures such as hair removal, treatment of leg and facial veins, our Dermiqueâ?¢ LaserFACIAL for sun-damaged skin. The Acclaim 7000 offers selectable parameters for customizing treatment based on skin and hair type, improving outcomes on a variety of patients.
Features :
Treats a wide variety of skin types (I-VI), including tanned skin.
Provides high-peak power to effectively treat fine hair.
Effective treatment of facial and leg telangiectasias (up to 3 mm).
Successfully treats a wide variety of vascular lesions.
Selectable laser parameters and spot sizes allow for a targeted approach to all veins.
The Dermique Laser Facial reduces diffuse redness (the blush of rosacea) and minor facial veins.
Quick and easy procedure with no patient downtime.
Offers multiple applications, faster treatments, and greater patient throughput, making your practice more productive and profitable.
Includes: 3mm, 7mm, 10mm, and 12mm Spot Size Attachments, Key, Operator Manual.
Application : Laser hair removal, leg veins, facial telangiectasia, vascular lesions and non-invasive skin treatment.
The device is a pulsed dye laser (PDL) with two wavelengths, 595 nm and 1064 nm, and offers a zoom handpiece that allows practitioners to treat areas between 0.5-12mm.
Vbeam laser technology refined to perfection is one of the world's best-selling pulsed-dye lasers (PDL), featuring advanced 595 nm PDL to treat multiple vascular and dermatologic conditions. The Vbeam Perfecta laser system is a world renowned, easy to use pulsed dye laser recognized as the gold standard technology for the treatment of vascular lesions. The Vbeam PDL has been proven time and again for the successful treatment of a wide array of vascular, pigmented, and certain non-pigmented lesions, with a low incidence of side effects.
Alma Laser's Opus Plasma is the first fractional technology to enter the market- not to be confused with strictly plasma devices. The combination of RF with 'micro plasma" energy allows us to treat skin texture and quality concerns in less time and with less patient downtime compared with other skin resurfacing solutions.
Alma Opus Plasma Radio Frequency Fractional Skin Resurfacing â?? With Viro-Vac Smoke Evacuator, Ultrasonic Cleaner For Tips & Includes Consumable & Service Support.
Featuring Almaâ??s proprietary high frequency, unipolar technology, the Alma Opus systemâ??s Opus Plasma handpiece is the first-of-its-kind Fractional Plasma technology to enter the skin resurfacing market. This novel solution addresses superficial to complex textural and skin-quality concerns that are traditionally corrected with conventional fractional resurfacing lasers or full-field ablative resurfacing lasers, but with less downtime and a higher safety profile.
First Fractional Plasma technology or skin resurfacing.
Ablative results.
Versatile treatments.
Immediate results.
Minimum downtime.
Operating at a high frequency of over 40MHz, the metal pins on the Opus Plasma tips are super-charged with high voltage. When in close proximity of the skin, the charged pins react to atmospheric pressure in the air, creating plasma that in turn, creates the microthermal zones of fractional injuries.
Alma Lasers Opus Plasma laser RF Fractional Skin Resurfacing. Includes: Opus Plasma Hand piece with Carrying Case, (8) Glide Tips, Foot switch, Power Cord, Key.
2895 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime.
Fractional photothermolysis with a CO2 laser shows promise in the treatment of photodamaged skin. The purpose of this study was to evaluate a fractional CO2 laser device (SmartSkin, Cynosure, Westford, MA) for the treatment of facial photodamage.
System Type:Co2
Wavelength:10,600 nm
Power:30 W (max)
Output Mode:Multimode
Method of optical output:Articulated Arm
Aiming Beam:Laser Diode, 3 mW @ 635-670 nm
Electrical Requirements:100-115 V / 10 A (max) /50-60 Hz
Size: 46.1³ H x 18.1³ W x 24.00â?³ D (117 cm x 46 cm x 61 cm)
Weight:108 lbs (49 kg)
Evacuation System:Buffalo Filter Smoke Evacuator â?? Available Separately
Scanner:
Scan Area Size:15 mm x 15 mm (max)
Spot Size:350 um
Scan Mode:Normal, Interlaced and Autofill*, *Not available in ablative mode
Mode:Super Pulsed
Pulse Duration:0.2 ms 2.0 ms (Fractional Ablative); 0.2 ms â?? 20.0 ms (Ablative)
Density:1 78% (Fractional Ablative; 78% (Ablative)
4â?³ Surgical Handpiece:
Spot Size d63:0.214 mm
Mode:Continuous, Pulsed and Super Pulsed
SECRET RF micro-needle fractional system is a leading technology for skin lifting, scarring, tightening and rejuvenation, using precisely controlled bi-polar radio frequency in conjunction with minimally invasive insulated or non-insulated micro-needles.
SECRET RF is a fractional micro-needling system (fractional radiofrequency) that exceeds the capabilities and limitations of fractional laser significantly. It is a system for extensive skin structure improvement and treatment of hyperhidrosis (radio frequency thermotherapy RFTT), based on both monopolar and fractionated on, bipolar radio frequency. An exact adjustment of the depth of the microneedles and the cold passing the epidermis allow the energy output directly into the target layer.
3. Main technical parameters
3.1. Y-axis movement range: 130mm
3.2. X-axis movement range: 150mm
3.3. Spacing between two marking columns: 270mm
3.4. XY axis drive method: electric drive
3.5. Z-axis click method: motor driven
3.6. Click power: 500gf or customize weights according to customer requirements.
3.7. Striking force: 500gf or customized weights according to customer requirements.
3.8 Click speed: 10-100 times/minute
3.9. Scratch speed: 30-2000mm/min
3.10. XY torque: 8.0Nm
3.11 Testing station (linkage): 2
3.12 Control functions:
A. Digitally set running speed (X/Y/Z axis)
B. Digitally set running displacement (X/Y axis)
C. Counting value display setting: 0~999999, any setting, power off memory
D. Line drawing method: long (square), straight line.
3.13. Shutdown method: automatic shutdown by counting values
3.14. Working voltage: 220VAC 50HZ 3A
3.15. W780 * D570 * H520mm
2ã?? Instrument Introduction
2.1 Product Usage
Click marking tester is a special testing device for small consumer electronic products such as e-books, tablet computers, mobile phones, walkie-talkies and Electronic dictionary. It mainly performs durability tests on hand written screens and touch screens, such as grid drawing, clicking, and rubbing.
2.2 Equipment characteristics
Using PLC control, simply select a starting point on the screen of the product to be tested, and then set the testing stroke in the device to run. This machine can perform four modes of testing: X-line, Y-axis line, XY axis square or rectangular, and Z-axis click. And it uses a stepper motor combined with a ball screw as the motion mechanism, with accurate positioning, high accuracy, and low noise; Long lasting and durable.
M2 surgical laser is a professional surgical laser medical device, which offers 2 wavelengths-980nm and 1470nm to help you solve all your clinical difficulties. Multitude of applications including hemorrhoids, piles, anal fissure and anal fistula can cover all your needs. Therefore, we do not limit ourselves to providing standard products, but are flexible enough to change with your needs. We also provide a 5-year guarantee for the laser module and 3-year guarantee for the accessories.
M2 is a new generation surgical laser system that we develop specifically for surgeons 1470nm and 980nm can be selected individually or blended together as well as 1940nm can be performed. It can be equipped with a variety of high-power laser modules to meet the needs of different doctors. The M2 surgical laser platform supports multiple applications in aesthetic and surgical procedures.
High power CW laser cleaning equipment adopts single-mode continuous fiber laser source. The laser power is continuously adjustable. It has higher photoelectric conversion efficiency (>30%), better and more stable beam quality, and stronger anti-high reaction ability. Its price is very favorable.
Features
High electro-optical conversion efficiency
Maintenance-free operation
Stronger anti-high reaction ability
QBH connector
Easy to operate
Environmentally friendly
Specifically designed in high volume laser cutting environments, the fiber laser Robotic flexible 3D cutting system will vastly improve your production efficiency and accuracy which will give you a superior product for your market.
We utilizes either Kuka or ABB robots which provide accuracies from +/- 0.05mm and maximum positioning speed of 30m/min. Also using the latest in laser technology by integrating the power efficient fiber laser source, giving you the best and most cost effective technology on the market today.
The fiber laser Robotic flexible 3D cutting system is defined as: multi-angle, multi-direction flexible cutting for different thickness metal-plate by specific fiber laser cutting head.
The fiber laser Robotic flexible 3D cutting system utilizes the advantage of the flexibility and performance of the robot . According to the size of the processing work piece, in order to teach-programming or offline-programming different tracks on different products, the robot can be installed correctly or inversely .The robot ´s sixth axis loaded fiber laser cutting head is also able to do the 3D cutting on the irregular processing work piece.
The machine adopts radio frequency laser (metal sealed RF laser) and speedy galvo scanning system. All the fittings can meet the pipelining processing continues dynamic on line with the proprietary working control software. It can realized automatic edition and correction of characters, signs, graphs, images, bar codes, two-dimensional codes, automatically increased serial numbers.
Laser Cleaning Machine 120 Watt, contact for other models
Cleaning Head is portable and it operates with precise deflection and position of the laser beam.
Removal of Contaminates:
De-greasing
Metal Parts Cleaning
De-painting
Anodizing removal
3D Surface Cleaning and Conditioning
Surface Texturing
Cosmetic surface conditioning (replaces bid blasting)
Selective paint Removal
Mold Cleaning
Joining pre-treatment Cleaning
On-The-Fly Cleaning
Ablation (Anodized, Painted or Coated)
Features
Customer selected depending on the thickness of the material to de-rust.
Materials mostly used for laser cleaning are Aluminium (Anodized/Polished/Cast), Stainless Steel/ Mild Steel, Titanium, Copper, Brass, Nickel, Galvanized Metals, Multi-Coated Materials, Painted Metal Alloys, Plastics, Polypropylene/Polycarbonate, Cast Iron and Chrome, Chrome, Carbide, Rubber and PVC.
2895 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
