The Cynosure Acclaim Aesthetic laser is a solid state Nd:YAG laser that is effective for laser hair removal on all skin types which includes tanned Skin. Nd:YAG is considered the gold standard for dark skin hair removal been both safe and effective.
The Acclaim 7000 Nd:YAG laser allows you to expand your practice by offering cosmetic procedures such as hair removal, treatment of leg and facial veins, our Dermiqueâ?¢ LaserFACIAL for sun-damaged skin. The Acclaim 7000 offers selectable parameters for customizing treatment based on skin and hair type, improving outcomes on a variety of patients.
Features :
Treats a wide variety of skin types (I-VI), including tanned skin.
Provides high-peak power to effectively treat fine hair.
Effective treatment of facial and leg telangiectasias (up to 3 mm).
Successfully treats a wide variety of vascular lesions.
Selectable laser parameters and spot sizes allow for a targeted approach to all veins.
The Dermique Laser Facial reduces diffuse redness (the blush of rosacea) and minor facial veins.
Quick and easy procedure with no patient downtime.
Offers multiple applications, faster treatments, and greater patient throughput, making your practice more productive and profitable.
Includes: 3mm, 7mm, 10mm, and 12mm Spot Size Attachments, Key, Operator Manual.
Application : Laser hair removal, leg veins, facial telangiectasia, vascular lesions and non-invasive skin treatment.
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime. Fractional photothermolysis with a CO2 laser shows promise in the treatment of photodamaged skin. The purpose of this study was to evaluate a fractional CO2 laser device (SmartSkin, Cynosure, Westford, MA) for the treatment of facial photodamage. Cynosure Smartskin Fractional CO2 Laser; Excellent Cosmetic & Operating Condition; Manufactured 2014; Reason for Selling: Downsizing; Includes: Scanner Handpiece, Footswitch, Key,Operator Manual. System Type:Co2 Wavelength:10,600 nm Power:30 W (max) Output Mode:Multimode Method of optical output:Articulated Arm Aiming Beam:Laser Diode, 3 mW @ 635-670 nm Electrical Requirements:100-115 V / 10 A (max) /50-60 Hz Size: 46.1³ H x 18.1³ W x 24.00â?³ D (117 cm x 46 cm x 61 cm) Weight:108 lbs (49 kg) Evacuation System:Buffalo Filter Smoke Evacuator â?? Available Separately Scanner: Scan Area Size:15 mm x 15 mm (max) Spot Size:350 um Scan Mode:Normal, Interlaced and Autofill*, *Not available in ablative mode Mode:Super Pulsed Pulse Duration:0.2 ms 2.0 ms (Fractional Ablative); 0.2 ms â?? 20.0 ms (Ablative) Density:1 78% (Fractional Ablative; 78% (Ablative) 4â?³ Surgical Handpiece: Spot Size d63:0.214 mm Mode:Continuous, Pulsed and Super Pulsed
The Precitec laser cutting copper nozzle can assist the gas to eject rapidly, which can effectively prevent the debris from falling upward and thus protect the focusing mirror. At the same time, it controls the diffusion area and size of the gas, thus affecting the cutting quality of the laser cutting machine. Single nozzle is used for melting cutting, that is, nitrogen is used as auxiliary gas to cut stainless steel and aluminum plate. Double nozzles are commonly used for cutting oxygen, which uses oxygen as an auxiliary gas for cutting carbon steel. Advantage: Advantage: 1. Made of high quality copper material, can provide stable signal transmission. 2. High processing precision, high light inside the stack surface, airflow barrier through, less slag, no burrs, cutting easily. 3. The strict oxidation prevention process, copper bright, smooth surface, can effectively prolong the use of time. 4. Suitable for market mainstream brands, such as PRECITEC, Han, laser, Wan Shunxing, Jin Yun, Dican, Hong Shan, Jia Qiang, Chutian, thunder, high energy and other fiber laser cutting head. At the same time, the choice of the nozzle aperture size will vary according to the thickness of the cutting material. 1.Cutting thin plate (3mm below): choose diameter 1mm aperture nozzle, cutting effect will be relatively fine, and choose diameter 1.5mm aperture of nozzle will be thicker, and the corner of the place will be easier to stain. 2.Cutting plate (above 3mm): choose to use 1mm when the diameter of the nozzle aperture is not stable, because the cutting power is higher, the relative cooling time is longer, the relative cutting time increases, with 1mm aperture diameter nozzle gas diffusion area is small, so it is not too stable, but basically can still be used. The nozzle with a diameter of 1.5mm diameter has a large gas diffusion area and a slower gas flow rate, so it is stable when cutting. 3.Cutting more than 10mm of the plate. At present, 2mm or 2mm diameter nozzle is usually chosen. Note: Some 0.8/1.0/1.2/1.4/1.5/1.8/2.0/2.5/3.0/4.0 aperture size, please select need output aperture.
Material Fused Silica Lens Diameter 13.8mm ±0.1mm Edge Thickness 1.5mm ±0.1mm Laser type 1064nm (BBAR 1020nm-1080nm) Optical Coating Both sides AR/AR@1064nm(1020nm-1080nm) Application YAG/Fiber laser cutting/welding/Cladding machines Laser power 500w-6000w
3 ProductService Description IntegreX the latest offering from SLTL Groups laser cutting lineup is setting a new standard for value in the market As a byproduct of SLTLs acclaimed Fiber Laser cutting series IntegreX embodies reliability efficiency and productivity Ideal for fabricators stepping into laser cutting technology this machine delivers exceptional cutting quality at an affordable price earning its place as a favorite among fabricators Key Features Common Fly Cut IntegreX introduces FLYCUT a gamechanging feature for highspeed cutting applications FLYCUT facilitates continuous cutting without lifting the laser head optimizing processing speed by minimizing head travel movements Highly Intelligent Nesting The smart nesting software enhances efficiency for both small and large designs It intuitively reduces processing time and allows users to modify programs on the fly ensuring maximum precision and highspeed laser outputs Auto Sheet Orientation Speeding up the cutting process the autosheet orientation feature eliminates manual alignment The program automatically orients to the angle of the sheet eradicating nonproductive time spent arranging sheets UserFriendly Software IntegreX boasts userfriendly software that simplifies the laser cutting process It enables users to effortlessly add change or delete programs on the go ensuring peak precision and speed Elevate your manufacturing units efficiency with IntegreX where innovation meets performance SpecificationAdditional Details a Model IntegreX b Laser Source Fiber c Laser Power 1 15 2 3 kW d Power Consumption 10 12 17 20 kW e Working Area X Y Z 1550 x 3100 x 100mm f Position Accuracy 005 mm g Repeatability 002 mm h Work Piece Weight 750 kg i Country of origin Made in India
Supplier: Fiber laser protective windows, laser lens, laser focus lens, laser ceramic ring and nozzles, cynosure candela laser focus lens and slider windows, ipl sapphire crystal uvfs ipl prism bk7 ipl light guide
Dear Buyer/Importir, This laser, which is a professional manufacture specialize in fiber laser, CO2 laser cutting machine since 2004. will attend a lot of exhibitions this year, we are very glad to introduce you to buy the exhibition machines EXHIBITION MACHIEN WILL ENJOY: FREE SHIPPING + FREE INSTALLTION AND TRAINING Here are the time details, if you have interest, please kindly Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine
