Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump, irrigation pump
Model: 200QJ32-16/1
Flow: 32m3/h
Head: 16m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Built on heavy duty and proven platform, The Tirrana range of helical rotor pumps offers a peace of mind solution to all types of surface water transfer duties
Material Options
Wettable Housing Parts: Cast Iron
Rotor: Stainless Steel 410, Hard chrome plated
Stator: Natural, Nitrile
Shaft and Coupling Rod: Stainless Steel 410**
* Above material options are standard for Tirrana Range, contact Roto for other material requirement
** With gland packing, Shaft is Hard chrome plated under gland area.
Applications:
Ideal for tank filling or stock watering from dams, creeks, wells and rivers.
Can handle clean water, brown water, dirty water with sand, silt or algae.
Price range: Rs. 25000 to Rs. 10 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Aov treadle irrigation pump is a high capacity pump designed to lift water by suction from shallow wells upto 7.5 mts. And other surface sources.
It has a capacity to discharge 5000-7000 liters per hour.
It is operated by leg muscles in a comfortable walking motion and can be operated by one or two adults or two or more children.
It is a double cylinder and double acting model, both downward stroke and upward stroke delivers water and optimum utilization of energy spent is achieved.
A portable self-contained unit sits at ground level.
Flexibility in installation, it can be moved from one location to another, without any permanent installation on a single well.
Due to its simplicity and compactness, maintenance of the pump is economical in all aspects.
DESTINATION
* Industrial water supply;
* On the building sites;
* In agriculture for irrigation;
* As cooling-water pumps;
* To increase the pressure in various industrial installations;
* Clean o slightly polutted liquids of which temperature doesn't exceed 105°C;
PARAMETERS:
* FLOW 5-550 m³/h
* TOTAL HEAD 3-90 m
* TEMPERATURE max. 105 °C
OPTIONS:
* Special design for temperatures of the circulated liquid up to 130°C;
* Internal-combustion engine driving;
* Various manufacturing materials (Br,Al).
* Various speeds of the driving electric motor: 750 rpm; 1000 rpm;
* 60 Hz frequency;
* Various voltage ratings: 220V; 380V/415V; 500V;
* Various classes of insulation: E, F;
* Various protection classes of the electric motor: IP54T3; EXD II CT4; ANTIGRI.
* Various sealings materials;
DESIGN:
* Centrifugal mono-staged pumps with horizontal axle;
* Axial suction; horizontal or vertical discharge;
* Overhung mounted impeller;
* Oil-bath lubrication;
* Sealing with graphitized cord and stuffing box;
ADVANTEGES :
* Long life;
* Easy assembly;
* The steel base plate provides good vibration absorption;
* Standard manufacturing materials;
* Interchangeability of pump parts as well as of the pumps as part of the pumping machinery;
MOTOR:
* THREE-PHASE CURRENT:
Speeds 1450; 2900; rpm
Nominal power 0, 55-75 KW
Voltage 220/380; 380/660 V
Frequency 50 Hz
Class of Insulation B
Protection class IP54 ... Depending on the customer requirements.
Centrifugal Water Pumpset
Centrifugal Water Pump direct coupled with flexible rubber coupling to I/C Diesel Engine & mounted on cast iron base frame.
Pump Size : 2"x2" to 6"x6"
Engine : 3.5 HP to 25 HP
MTS 230 N
# of Diaphragms 2
Max Pressure 35bar 507 PSI
Max Flow 30 lt/min 7,93 GPM
Max RPM 540
Power 3,5 KW 4,76 HP
Suction Diameter 35mm
Delivery Diameter G M,10mm
Kind of Used Oil 20w50
Pump Anodized Aluminum
Diaphragm/Seal Material Buna Rubber
Oil Capacity 0,70 L 23,66 lb oz
Dimension 25 x 30 x 30 cm
Weight 11,15 kg 24,58 lbs
Senwart water pumps are equipped with an oil level alarm system: when the oil level is too low, the gasoline engine will automatically stop running to avoid specific damage to the engine.
Aluminum alloy and durable cast iron body can withstand high pressure and is more durable, with simple and reliable structure to maximize flow rate.
Wear-resistant graphite and ceramic magnetic mechanical seals are used to provide excellent sealing performance.
High-pressure pump with wear-resistant cast iron volute and aluminum alloy impeller to maximize flow.
MODEL:
WP30G
Engine type : 168F-1
Engine : 4 Stroke, single cylinder, air-cooled
Displacement : 196cc
Motor type : Gasoline
Engine : 3,600rpm
Power : 4.8kW / 6.5HP
Outlet size : 3 inch / 80mm
Inlet size : 3 inch / 80mm
Max flow : 60m�³/h
Total head : 30m
Suction : 8m
Fuel tank : 3600ml
Compression ratio : 8:05:01
Start model : Recoil
Oil tank : 600ml
Package : 505x410x450mm
N.W./G.W. : 31kg/35kg
Qty.:20'/40'HQ : 300pcs/600pcs
Brand new impeller and scroll case, the efficiency of the water pump could reach 65%-70% with 2-5m increased for the pump lift
Patented appearance design, novel and unique
Scroll case is located by positioning pin for more reliable use
·Anti-winding ring, so clear water pump has the function of dust water pump
Separated shock pad design for the support base, in order to minimize the shock
·Humanized pump connector for easily assemble Complete accessories available
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
“Sabar” 8"Submesible Pumpset - Water Filled are in Three Phase suitable for 8" & above bore well size. The Head range is between 8 Mtrs. to 326 Mtrs. & Discharge Range is between 250 LPM to 3000 LPM. Motor HP Range is from 7.5 HP to 60 HP. Pump Stage range is from 1 Stage to 16 Stage.
The Salient Features of 8" Submersible Pumpset - Water Filled are as under :
1) Wet type, Water Cooled Rewindable Motors
2) Withstands wide voltage fluctuations
3) Most of the models have ISI marks
4) Available with Stainless Steel & bronze MOC
5) Long life due to study construction.
The Applications of 8" Submersible Pumpset - Water Filled are as under :
1) Field Irrigation
2) Private / Public Water Supply
3) Flow / Drip / Sprinkler Irrigation
4) High Rise building water supply
5) Fire Fighting.
“Sabar” 10"Submesible Pumpset - Water Filled are in Three Phase suitable for 10" & above bore well size. The Head range is from 4 Mtrs. to 264 Mtrs. & Discharge Range is from 50 LPM to 4000 LPM. Motor HP Range is from 15 HP to 125 HP. Pump Stage range is from 1 Stage to 13 Stages.
The Salient Features of 10" Submersible Pumpset - Water Filled are as under :
1) Wet type, Water Cooled Rewindable Motors
2) Withstands wide voltage fluctuations
3) Most of the models have ISI marks
4) Available with Stainless Steel & bronze MOC
5) Long life due to study construction.
The Applications of 10" Submersible Pumpset - Water Filled are as under :
1) Field Irrigation
2) Private / Public Water Supply
3) Fow / Drip / Sprinkler Irrigation
4) High Rise building water supply
5) Fire Fighting.
“SABAR" 6" Submersible Pumpset - Water Filled are in Three Phase suitable for 6" & Above Borewell Size. It's Head Range is from 7 Mtrs. to 271 Mtrs., Discharge Range is from 40 LPM to 1250 LPM, Motor HP Range is from 3 HP to 30 HP & Pump's Stage Range is from 2 Stages to 30 Stages.
The Salient Features for "SABAR" 6" Submersible Pumpset - Water Filled are as under :
1) Wet type, water cooled rewindable motors
2) Withstands wide voltage fluctuations
3) Most of models are having ISI Marks
4) Availbale with Stainless Steel & Bronze Material of Construction
5) Long life due to Sturdy construction.
The Applications for "SABAR" 6" Submersible Pumpset - Water Filled are as under :
1) Field Irrigation
2) Private / Public Water Supply
3) Flow / Drip / Sprinkler Irrigation
4) High rise building & Fire Fighting.
