Clean Water Pump

Qb series Applications and installation Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and the peripheral pump couple directly. They do well in carrying clean water or the liquid whose physical and chemical nature similar to clean water, not exceeding They are ideal for household well water pumping, water injection supplying, car washing, and garden watering etc. Operating limitations Max ambient temperature up to 40 Max fluid temperature up to 80 Max pressure up to 10 bar Construction features Pump body: cast iron Motor housing: aluminum Shaft: 45# steel /stainless steel Impeller: brass Motor: closed, externally ventilated Insulation class: b/f Protection class: ip44/ip54 Duty: continuously rated Mechanical seal: ceramic steatite/ metalized carbon Thermal protector (if required)

More powerful;5%-8% power increasing Professional water pump High flow capacity High strength frame Easy starting and operation;Smaller vibration High lift 50m / 80m

1. Technical data Suitable fluids: clear water. Power: 0.37 kw (0.5hp) Single phase: 220v---240v/50 hz(or 110v/60hz ) Degree of protection: ip44. Insulation class: b Pumping head: 40 meters. Flowrate: 40l/min (2.4m3/h) Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and peripheral pump coupled directly. They are ideal for household well water pumping, water injection supplying, car washing, and garden watering and so on. 1pcs/box 6pcs/carton 275*150*170

Plastic garden submersible pump Operating Condition: Fluid temperature up to 35 Centigrade Maximum ambient temperature 40 Centigrade. Maximun particale: 30mm for dirty water type Maximun particale: 5mm for clean water type Structural Charactristics: * External float switch for automatic pump operation. * Pump body made from fiber glass reinforced technopolymer, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body. * Technopolymer open impeller. * Suction strainer made from fiber glass reinforced technopolymer, providing the support base for the pump. * Technopolymer hose joint with screw fitting. * C45 steel motor shaft. * Double seal carbon/aluminum on the pump side and sealing ring on the motor side. * Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector). * Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself) * Protection rating IP 68 * "H05/07 RN-F" Neoprene submersible supply cable. * Supplied standard with 10 meters of cable and plug. * Voltage and frequency available on request. * 220V/50Hz, 220V/60Hz, single phase * copper wire stator with thermal protector Insulation class B, Protection IP44, Continuous duty . Certification: 1. CCC Safety certificate 2. CE certificate 3. GS certificate. HS Code: 841381 Trademark: Haitaipump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.

High-Pressure ISW Series Pipe Centrifugal Water Pump Product Features: This product is of horizontal structure, used for conveying clean water and other liquid with similar physical, and chemical properties to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery in high-rise buildings, sprinkler irrigation in gardens, pressurized fire fighting, long-distance transportation, heating ventilation air conditioning circulation, bathroom, and other pressurized cooling, and heating water circulation and supporting equipment. ISW series single stage end suction centrifugal pump is an energy-saving pump. The advantage is hydraulic capability is distributed reasonably, wide option for user, conveniently check and repair, the efficiency and throw is up to advanced international level. This pump is suiable for industrial and city water supply, water drainage.

Flow: 25m3/h Head: 91m Power: 11kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 20m3/h Head: 64m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.

Our Triplex Plunger Pump Company, Lynx Pressure System is well known manufacturer of High pressure triplex plunger pump with an extensive range of High Pressure Water Jetting Cleaning Pumps pressure up to 1400 Bar. These Water Jetting Pumps are widely suitable for removal of contamination in manufacturing industries such as Engineering Components, Ship Cleanings, Paints, Oil, Mud and Mines & Equipment Cleanings, Boiler tube cleaning, Condenser tube cleaning and Also in Railways Manufacturing Components, Construction Equipment & Earth Movers and many more etc.... Our high pressure triplex plunger pump is also suitable for Hydrotest too...... These Water Jet Cleaning Pumps are manufactured by using very superior and premium quality raw material. You can purchase this range of apparel at moderately costs.

Working condition Suction lift up to 5 m Liquid temperature up to +40oc Ambient temperature up to +40 oc Max. Working pressure: 5bar Float switch: can be with or without (on request) Application and installation They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made. Mainly used for well pumping, river pumping, farm irrigation, water supply, drainage in breeding industry. Structure feature Pump body: cast iron or aluminum Motor bracket: cast iron or aluminum Impeller: aluminum or plastic Mechanical seal: ceramic - graphite or silicon carbide-carbide alloy 390*165*200