UV-Lamp Weathering Test Chamber takes fluorescent UV lamps as light source to simulate the UV irradiation in natural light and condensation to conduct accelerated weathering test on the materials, It simulates UV, rain, high temperature, humidity, condensation, darkness and other environmental conditions, combine them together, and carry them out automatically.
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard. .Suit IP5X and IP6X test .Interior chamber made by SUS304 stainless steel. .Exterior material is steel plate with protective coating. .Dust re-cycle blowing by circulating pump. .Dust collection section is located on bottom of test chamber. .A heater fixed into test chamber to keep dust dry. .A viewing window with a manually controlled wiper. .Programmable color display touch screen controller which located on right side of chamber. .The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination. .A stainless steel shelf for placing test specimens. .Chamber inside equipped with power interface for test specimen .Lighting in test chamber .Vacuum system for specimen .Bottom install 4 castors for ease moving, and with brakes function .Safety protection Working principle
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard.
IPX3 IPX4 Water spray ingress test chamber is installed with oscillating tubes to spray water onto products by following IEC60529 standard, it tests and evaluates the protection degree provided by the products outer shell, this identified protection level against water ingress is called IP code.
Water ingress protection test chambers test and evaluate the protection degree provided by a product enclosure. the protection level against water ingress is called IP code,IPX5 IPX6 Water Jetting test chamber adopts a nozzle spraying water (IPX5:Ф6.3mm, IPX6:Ф12.5mm) against enclosure from every direction which should have no harmful effects, Symor strictly follows IEC60529 standard.
Water ingress protection test chambers test and evaluate the protection degree provided by a product enclosure. the protection level against water ingress is called IP code,IPX5 IPX6 Water Jetting test chamber adopts a nozzle spraying water (IPX5:Ф6.3mm, IPX6:Ф12.5mm) against enclosure from every direction which should have no harmful effects, Symor strictly follows IEC60529 standard.V
UV-Lamp Weathering Test Chamber takes fluorescent UV lamps as light source to simulate the UV irradiation in natural light and condensation to conduct accelerated weathering test on the materials, It simulates UV, rain, high temperature, humidity, condensation, darkness and other environmental conditions, combine them together, and carry them out automatically.
1.Volume:430 liters 2.Dimensions:1680 x 1030 x 970mm 3.Tank size : 1200 x 600 x 600mm 4.Useful size : 1120 x 560x 460mm 5.Ultrasonic power : 3.5 Kw 6.Ultrasonic frequency :28KHZ 7.Heating power : 10 Kw 8.Packing Size (mm) 1500Ã?1250Ã?1080 9.Port:Shanghai LEAD TIME 3 weeks Standard Single Tank 28khz Frequency Ultrasonic Cleaner The Motor Clean series offers equipment and ultrasonic cleaning systems designed specially for professionals of the motoring world. At Tense, we know and understand the cleaning needs of the industry, so we have developed the most efficient cleaning system, ensuring an optimum quality in the cleaning processes of our clients. Equipment from the Motor Clean series offer indisputable advantages over traditional cleaning systems. They are the best choice for degreasing, decarbonising and descalingengine pieces and components since they achieve the best results for being able to access the most hard-to-reach pieces regardless of their complexity and with no effort. The Motor Clean series covers the needs of all types of businesses within the motor industry, regardless of their size or specialisation, because it includes standard equipment that adapts to any piece, no matter its measurement (capacity from 47 to9600 litres).
HBsAg Diagnostic test
ITEM SPECIFICATION Model ACM-02 Capacity 5-10kg/hr Main motor power 1.5 kw Feed motor power 0.37kw Classifier motor 0.55kw Rotary sieve motor 1.1kw Filter bag 12pcs Material of pipes stainless steel control panel attached to the machine
ITEM SPECIFICATION MODEL WDE-3315 CAPACITY 515KG/H EXTRUDER SCREW TYPE TWIN SCREW SCREW LENGTH/DIAMETER 15:1 SCREW SPEED 0- 500R/MIN SCREW DIAMETER 33MM MAIN MOTOR POWER 5.5KW HEATING TYPE ELECTRICAL PIPES HEATING PIPES POWER 2.5KW COOLING SYSTEM WATER COOLING DRIVE MOTOR BRAND SIEMENS BRAND ELECTRICAL COMPONENTS CHNT FREQUENCY INVERTER EURA ELECTRICAL POWER SPECIFICATION 380V 50 HZ, 3P.
Metalizador al vac, o de anti-huella recubrimiento Nuestra empresa ha llevada la innovaci, ³n t, ©cnica para renovar el dise, ±o de nuestra deposici, ³n de sputtering de cat, ³dica mf, junto con la tecnolog, a de cvd y evaporaci, ³n t, ©rmica en una recubrimientos integrales. Por lo tanto, mejor, ³ enormemente la calidad de recubrimientos con caracter, sticas de buena adhesi, ³n, dureza, con funciones de anti-impureza, anti-fricci, ³n, anti-envejecimiento, anti-soluci, ³n de la pel, cula depositada. Por lo tanto, los sustratos recubiertos pueden superar las pruebas de calidad, como a remojo en la soluci, ³n y el hervido en agua. Este tipo de m, ¡quinas puede depositar pel, culas ar, af o as en el mismo ciclo para la producci, ³n en masa, apropiado para el recubrimiento decorativo sobre sustratos de metal y vidrio. Mediante este tipo de m, ¡quinas, la deposici, ³n de pelicula de anti-huella puede realizarse mediante nuestro m, ©todo innovador. Este tipo de m, ¡quinas sputtering mf tiene caracter, sticas de gran cantidad de carga de sustratos con ventajas de alta eficiencia, proceso simple, manipulaci, ³n conveniente y alta uniformidad de peliculas depositadas, ampliamente aplicable en los campos de producci, ³n de dispositivos m, ³viles, golf, c, ¡maras digitales, computadoras y otros aparatos el, ©ctricos.
Diffusion cell apparatus having 3, 6 & 8 stages (stirring units) here user can place any no of cell up to it own capacity, instruments will provided with hot water circulating system to maintain uniform desired temperature having temperature accuracy 0.1 degree c. In each and every diffusion cell ( glass part) as receptor cell, in addition to we provide separate controller for each stirring unit, means user can stirrer each and every stirrer by different rpm.With digital rpm display. 24 inch x 36 inch x 36 inch
Laboratory Enterprises manufacture Advanced grip strength for scientific study of muscles strength of small laboratory animals such as Rat and Mice, which having capacity up to 50 Newton, user can observer results in Kilograms (Kg), Pounds (Ib) and Newton (N), User can change direction of Displayed Reading as it can be from front side and from back side, In addition to this user can freeze maximum reading by pressing Peak mode here user has to press zero to go for next reading. also user can go for Auto peak, by selecting Auto peak mode user will get highest peak results on display for the moment and after 3 seconds it will be zero automatic, battery backup facility also provided with the instrument by default, instrument can be directly to the printer also but laboratory Enterprises has provided special software utility for more study as user can view reading on computer screen with numerical and graphical form, also user can export data in micro-soft excel sheet. user can save that experiment reopen.
Laboratory Enterprises manufacture Advanced Incapacitance Meter ( Weight bearing test apparatus) to measure weight of hind limbs here user can can measure separate weight of left hind limb or Separate weight of right hind limb, or both left & Right hind limbs at the same time for scientific study of muscles strength of small laboratory animals such as Rat and Mice, which having capacity up to 20 Newton, user can observer results in 2.0 Kilograms (Kg), Pounds (I b) and Newton (N), User can change direction of Displayed Reading as it can be from front side and from back side, In addition to this user can freeze maximum reading by pressing Peak mode here user has to press zero to go for next reading. also user can go for Auto peak, by selecting Auto peak mode user will get highest peak results on display for the moment and after 3 seconds it will be zero automatic, battery backup facility also provided with the instrument by default, instrument can be directly to the printer also but laboratory Enterprises has provided special software utility for more study as user can view reading on computer screen with numerical and graphical form, also user can export data in micro-soft excel sheet. user can save that experiment reopen.
Laboratory Enterprises manufacture and supply advanced Tablet Hardness Tester for the use to many pharmaceutical colleges, medical colleges and advanced research institutes. The level of hardness can be displayed in three different units which can be chosen according to the needs. There is a backup power facility to keep the device running in the case of power failure. Automatic peak point calculation has been enabled to find breaking point of tablet automatically. Laboratory enterprises introduces advanced tablet hardness tester, which having three kind of unit to display result as per select by user as Kg / Ib / N, battery backup facility provided to avoid interruption in experiment due to electricity failure, without peak and auto peak facility has provided to get break point of tablet automatically, dual sided screen resolution provided to comfort to see from front end and back end to user, in addition to all these features Laboratory enterprises provides PC connectivity but it is optional by this facility user can configure instrument as their desire and walk out for another task .
Our highly versatile Digital Organ Bath has become the most sought after organ bath by all the pharmacy colleges, medical colleges and other famous research institutes. These offer highly accurate readings and have digital indicators. The organ tubes have automatic fill and drain functionalities making it much easier to operate and maintain. The chamber is easy to clean, made of crystal clear substance and devoid of any kind of irregularities to give it the perfect finish. Laboratory Enterprises introduces digital organ bath having fully featured as automatic fill organ tube, automatic drain organ tube, whenever at the time of base line and contact tine of drug and tissue, reservoir coil, digital temperature controller having 0.1C resolution and accuracy is 0.1C, in addition to all these use get uniform temperature throughout water tank By submersible water circulation pump.
Our revolutionary concept in the design and development of high precision Actophotometer has greatly increased pace of research and development elements in pharmacology. Our expert panel of engineers design and develop our products to achieve high accuracy combined with superior quality. Our customers have increased their demand for our products. We provide the products at most competitive prices that are affordable. We follow all the safety checks recommended by the quality control organization. Actophotometer is infra red sensor based equipments to track activity of small laboratory animal as rat or mice, in a closed chamber, on bases of x- axis and y- axis, LEâ??s actophotometer having 8/16 sensors on x- axis and y- axis depends on model, in addition to 8/16 sensors no needed to give personal presence to observe activity of the laboratory animal, cause LE gives you PC connectivity software utility, by this user can retrieve data as time spend on x- axis and y- axis, print etc.
Brazilian test apparatus It is also called rock tension testing machine. Brazilian test is a test for indirect measurement of tensile strength of rocks. The instrument is useful for testing specimen from 50 mm dia to 100 mm dia and of thickness of half the diameter. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain plates are supplied. A pressure gauge capacity 0-200kn x 2 kn is fixed at the base of jack. A maximum pointer is also provided on the gauge, a pair of semi circular platen for 50 mm dia samples also provided. This instrument can be used in field also. Supplied complete with the steel balls. Order code Product Lisc-563 Brazilian test apparatus with 50 mm dia jaws
Conforms to is: 10050-1981, & astm d 4644 This apparatus is used to assess the resistance offered by a rock sample to weakening and disintegration when Subjected to drying and wetting in a slaking fluid, usually water. The equipment meets the essential Requirements of is:10050 -1981 & astm d 4644 and comprises the following: A motor drive with reduction gear mounted on a base board and capable of rotating four drum assemblies at a Constant speed of 20 rev/min approximately. The motor drive is totally enclosed in a hinged cover for quick Accessibility. An operating switch is provided in the cover. Two / four test drums made of brass wire mesh, with one end closed and having a removable cover on the other End. They have suitable couplings for mounting in the perplex water troughs. The drums are 140 mm in diameter And have an unobstructed length of 100 mm. Two / four perplex water troughs, accommodate one test drum each. These drums carry quick couplings on either End which are in turn coupled with couplings of the motor drive. The troughs allow 40 mm unobstructed clearance Below the test drum. A water level mark is provided in each water trough 20 mm below the axis of rotation of the Drum. Suitable for operation on 220 volts, 50 hz, single phase ac supply. Order code Lisc-557a Lisc-557b No. Of test drums 2 4
