A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder
Sisal fiber, cashew nuts, urea 46 fertilizer, copper wire, sunflower oil, macadamia nuts, ginger, corn, soybeans, rail scraps, compressor scraps, ubc aluminum scraps, green cardamom, black pepper, sesame seeds, pistachios, red kidney beans, corn oil, crude soybean oil, palm oil, rapeseed oil, aluminum wire scraps, icuma sugar..Driffield trading company is an international wholesaler and distributor
1. used t rails r50 and r65 or any other type of rails. 2. hms1 and hms 2 iron scrap metals. 3. copper scrap metal of various specifications. 4. aluminum scrap metal of various types..
1. wet blue leather hides and skins. 2. coffee green and roasted beans. 3. aluminum billets / ingots / profiles..1. project management and consultancy. 2. tourism within the east africa region. 3. business development product sales and marketing.
Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Color: silver white
Urea fertilizer, urea 46, icumsa 45 sugar, refined sugar, refined sunflower oil, brown sugar, soybeans seed, soybeans meal, used rails, aluminium scrap, ubc cans, fresh onion, black pepper, fresh vegetables, edible oils, dry fruits , gemstones, beverage, animal extracts, copper, sisal, a4 copy paper, precious metal, stones, sisal hides, skins, animal..We source quality product worldwide from reputable manufacturers and provide transportation from factory / warehouse right to the loading port ,
Aluminum Wire Scrap From Electric Wire and Cable Item Quality standard AL 99.7% Si 0.25 %Fe 0.40%Cu 0.05% Mn 0.05% Mg 0.05% Ti 0.03% Zn 0.10% Packaging Detail: 1. Compressed into rectangular block 2. 50kgs/bag, 1000kgs/bag 3. 50kgs/bale, 50kgs/bundle 4. 20mt/20'fcl, 25mt/40'fcl Aluminum Wire Scrap,Aluminium Scraps Item: Aluminium scrap 6063 Aluminum scrap Aluminum wire scrap Aluminum scrap UBC(Used Beverage Cans) Aluminum wheel scrap Aluminum tense and tabor Aluminum content 75%, 95%, 99%, 99.7% Technical Process (Mould DesigningMould Cutting Mould Testing Mould Workshop Mould Heating) Extruding (Aluminium Ingot&Supplementary Materials Smelting Homogenizing Bar Heating ) Aluminum wire scrap Composition: Application: Aluminum alloy production, Steelmaking and requirements of the coating is not high Fireworks production 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on. We offer the clients with quality Aluminium Scrap that is used in various industries for making new aluminium products. Our range of Aluminium Scraps is free from unwanted content and corrosion resistant in nature thus highly demanded in the domestic as Packing: Wrapping or be packed in wooden cases, according to the customer demand. Team We are specialied in Metal materails such as aluminum engine scrap ,aluminium bar, aluminium ingots,aluminium ,tin ingots , copper bar and scarp aluminum , scrap copper, aluminum UBC scrap, aluminum wheel scrap, aluminum 6063 scrap, etc.(EL)
Steel billets.
This bulk PRILLED urea fertilizer contains 46% nitrogen. It should be mixed into the soil or watered in immediately to avoid losing a percentage of that nitrogen content to the atmosphere in the form of ammonia gas, which can happen if the fertilizer is left on the surface of the soil. Highly soluble Can be applied to the soil or used as a foliar spray for certain plants Can be mixed with some other fertilizers, including sulphate of potash. Do not mix with superphosphate fertilizers
ICUMSU 45 White Refined Sugar Specification Commodity: Refined Sugar (ICUMSA 45) ICUMSA: Max. 45 ICUMSA, Attenuation Index Units (method no: 4-1978) Polarity at 20 Deg. Centigrade: 99.80 Min. ASH Content: 0.04% Max. Moisture: 0.04% Max. Solubility: 100.0% Dry and Free-flowing Granulation: Fine Sediments: None Color: Sparkling Crystal White Magnetic Particles: mg/K4 SO mg/k 20 SO2: 20 PPM Radiation: Normal Certified Smell: Free of Smell Reducing Sugar: 0.05% Max. Substance: Solid, Crystal Max. Max AS: 1 p.p.m. Max OS: 2 p.p.m. Max CU: 3 p.p.m. Crop: Correspondent for the year in the curse HPN STAPH AUREUS: NIL MOLD & YEAST UFCC 10G: 10 MAXIMUM CUBED POISONOUS: PHYTOSANITARY CERTIFICATE SEED / HUSKS: OF NO RADIATION, NO VIRUS, NO INSECT PATS, NO POISONOUS MATTER, NON GENETIC, AND IS SUTABLE FOR HUMAN CONSUPTION Packaging: Origin Country: Uganda Manufacturer Logo Item Description: ICUMSA 45 Sugar Weight: 50KG
Cashew nuts, sisal fiber, battery scraps, used rails scraps, aluminum wire scraps, almond nuts, cloves, macadamia nuts, black pepper, white pepper.Distrubuting agent and trader