Product Description Combined different series of products can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-701 and Si-901 double film glass coating overlay, protects vehicle finish with excellent and extended durability, consolidating top-level 3D glass coating film, which is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-701 glass coating agent (30ml); 2. 1 Si-901 glass coating agent (30ml); 3. 1 X-03 protectant (30ml); 4. 2 Glass coating sponges; 5. 1 Manual Application Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information After completion of whole vehicle Si-901 glass coating practice, postpone for above 2 hours to carry out X-03 protectant practice; 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature .Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment Product Specification / Models 1. 5 Si-02 wheel coating agents (10 ml); 2. 1 Manual. Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film Other Information Note 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product Description The Si-701 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature , recommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-701 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application first, degreasing secondly,swearing thirdly. wipe forth. finish, if you want to know the details to use the glass coating, please contact us Other Information Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Description The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling propertiesrecommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-901 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models i-811 Kisho Glass Coating [Ingredients]SiO2 [Specifications]1L,2L,4L,17L Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-811 glass coating agent (30ml); 2. 1 X-03 protectant (30ml); 3. 1 Glass coating sponge; 4. 1 Manual Application Pre-practice treatment Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information 1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction; 4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice; 5. Please read practice manual in details and follow practice procedures therein
Product Description This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Feature This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Specification / Models 1. 5 G-01 window coating agents (20ml); 2. 5 Coating film sponges; 3. 5 Coating cloths; 4. 1 Manual. Application 1. Completely clear fouling and oil-film attached on window, and use a air gun to blow off moisture until it is completely dry; 2. Drip G-01 window coating agent on sponge wrapping the coating cloth for 7-10 drops, smear it on window uniformly with an alternating method of first lateral and then vertical; 3. Postpone for 5 min, then use a dry towel to wipe the window with polishing brightness to complete. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Specification / Models Kisho Si-02 Auto Wheel Coating [Ingredients] polysiloxane [Specifications] 1L,2L,4L,17L [Dosage] One liter liquid construction 100 cars, each car was 10ml Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product Description Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Feature Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Specification / Models BOTTLE:1L 5L 10L Application 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice. Other Information 1. Avoid practice under burning sun; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body; 4. After glass coating practice, postpone for above 2 hours to exercise subsequent X-03 protectant practice; 5. Upon later maintenance after 3-6 months, please rinse the vehicle body clean and blow off the moisture using a air gun; 6. Please read practice manual in details and follow practice procedures therein.
Automobiles, heavy equipment, machinery, electricals, metals, chemicals, plastic resin, medical equipment.
BS-N125 cable recycling machine is our company's N series of medium-volume and medium-capacity new scrap wires recycler machine. BS-N125 copper recycling machine can process your scrap wires and separate copper and pvc from used wires. Multi-function machine not only can process scrap wires, but also can process fuse, wires plug, small radiators and small compressors.
New product radiator recycling machine BS-1200S from the BSGH factory is copper recycling machine for separating copper tubes from aluminum foils. This automatic radiator separator machine can help you separate and recycle scrap copper from radiators fast and efficiently. BS-1200S radiator stripper machine has a bigger processing range, and can process different sizes of standard radiators, such as these radiators the copper tubes center distance is 17mm, 19mm, 21mm, 22mm, and 25mm; BS-1200S radiator copper recycling machine can process and recycle most of the scrap radiators, such as water tank radiators, car radiators, air conditioning radiators, and so on. The final product is pure copper tubes and aluminum foil, selling these scrap copper and aluminum helps you make money.
New finished motor stator recycling machine BSM-40 with 415V 50HZ is ready to ship to Oman. 2022 hot-selling model motor cutting pulling machine BSM-40: Multifunction, has cutting, pulling and lifting functions in the same machine. Big processing range, can process motor stator diameter is 50-500mm. Equipped with lifter, fit for processing big heavy motor;
Electric motor cutting pulling machine ST-400 with three phase electricity in hot selling. How to quickly remove copper from your electric motors ST-400 motor cutting pulling machine is useful. Has cutter and puller, cutter is good for cutting motor stator, puller is good for pulling copper from scrap motor. Want to recycle copper from motor Please , we are able to provide you best copper recycling solution.
New finished electrostatic separator machine is working for separating copper from plastic granules. When do you add an electrostatic separator to your copper wire recycling machine We all know this model of electrostatic separator is optional. If your wires are very very thin or you want to improve your copper separating rate, you can add this electrostatic separation device.
A worker who would do a good job must sharpen his tools, so if you are a scrap man, you need this model high-end electrostatic separator copper granulator machine. Raw materials(scrap wires) will be separated into copper and PVC, and the applicable range(wire diameter) of wires is from 0.02 mm to 30 mm. Through the crushing, separating and dust collecting process, scrap wires can be separated into pure copper rice and plastic granules in the end. Selling these copper rice you can get a big profit.
Cable copper recycling machine BS-N125 from BSGH factory is on sale. This model cable copper recycling machine BS-N125 is medium-capacity and medium size, processing capacity for copper recycling is about 300-500kg per hour. Multi-function, not only can process copper wires, aluminum wires, small radiator, and so on. High copper separating rate, and the copper separating rate can reach 99.9%;
What is twin shaft shredder machine This is a customized metal shredder with red color, used to cut and shred soft scrap metal, such as scrap copper, scrap aluminum, scrap iron, scrap steel, and so on. Are you interested in this copper shredder Equipped with two copper motors, one on each side of the shredder; High machine quality and good machine performance, also have a long machine life. Low speed and high torque, low noise and low dust; PLC control, equipped with an independent electric box, is safe and reliable
Big capacity radiator recycling line BS-ACP1000 is used to separate copper, aluminum, and iron from the waste radiator. Compared with the ordinary copper and aluminum radiator recycling machine, the biggest advantage of BSGH's new scrap radiator separator recycling line is that it can directly process all kinds of waste radiators without pre-cutting scrap radiators. Advanced technology and complete process flow ensure the separation and recovery of copper and aluminum and realize the regeneration of metal resources. The separation efficiency of copper and aluminum is greater than 99%, and the separation efficiency of iron is greater than 99%, the dust removal efficiency is greater than 99.9%. Technical data of radiator recycling machine is as follows: Model: BS-ACP1000 Application material: All kinds of radiators from the air conditioners, cars, water tanks, and so on Processing capacity: 2-3T/H Separate recycling rate: 99% Dust recycling rate: 99% Machine Power: About 149.55KW Machine Size: 27000 8000 5000MM
Washing machine motor recycling machine MR-W is cutting motor stator and pulling copper winding wires from waste washing machine motor. How to remove a washing machine motor? No need to dismantle it manually, our washing machine motor recycling machine helps you to solve this problem. Motor copper cutting pulling machine MR-W is designed for recycling washing machine motors. First, you can use a cutter to cut the stator, and then use a puller with eight jaws to extract all the copper winding wires from the motor. Technology data of this washing machine motor recycling machine: Processing Range: 40-75MM Machine Capacity: 1500 pcs/day Machine Size: 1120*630*990MM Machine Weight: 300kg Motor Power: 2.2KW Welcome to know more about this motor wrecker
