Air purifier, air cleaner, industrial ventilation system, biomass power plant, waste treatment systems, composting system, rdf production system, deodorization system, aeraulic sorting and separating system.
Avio engines and power plant components.
Used plant complete for steel foundry slitter used machinery and big generator.
Power plant, power generation.
Italian foodstuffs and beverages, scraps, cement, crude oil/petro products, bitumen, refineries, power plants, turbines , agro products, medical equipments, etc....
Water proofing membranes, asphalt, bitumen tar, hdpe granules, ldpe granules, ldpe granules, wool scrap, industrial machinery like excavators, cranes & electric generators.Transportation & shipping
The Company is a family-run business and it has its origin in the Tuscan landscape, near the town of Pistoia. The company devotes itself to the growing of a numberless range of plants; skilled hands select the best specimens and take care of them, using the most innovating solutions. You can find the widest range of plants of any size or age, belonging to the Mediterranean or exotic-tropical flora. Many conifers suitable for the coldest climates are also available. The Company offers: Bonsai nursery, conifer nursery, garden plants nursery; Wholesale of garden plants, conifers and bonsai. The Company wishes to get in touch with importers/wholesalers as well as Trading Companies from target countries which could be interested in importing and distributing the above products. Target Countries: France, Libya, Algeria.
NPK fertilizer contains three essential nutrients needed for plant growth and overall plant health. These three essential nutrients include nitrogen (N), phosphorus (P), and potassium (K).
Used water treatment and recycling for stone processing enterprises. Fraccaroli, Omec, Saba, etc. And also the whole range of used equipment for the extraction and processing of granite, marble, stone. From mining and block cutting to any finished product (Italy).
Features: Intelligent electricity saver up to -35%. A new technology in power saving! Proven to save within first month! Easy to use, just plug in and start saving ! Saving up to 35% of your bill ! Product feature: Reduce your electricity bill up to -35% Improve electrical efficiency and power factor Reduce power loss Prolong the life of appliances Easy to use. Maintenance free. Fully compliant with safety standards Reduce electrical overheating Stabilize the supply voltage Environmental friendly Aesthetic design.
Trucks & trailers with superstructurs for all kind of work, electric generators, motor compressors, water pumps, agricultural tractors and implements.
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols
Plant.Development plant
Semiautomatic filling machine stainless steel made, mounted on wheels. The unit has limited overall dimensions. â?¢ Linear filler with 2, 4 or 6 filling valves for gravity filling of all flat products as wine, spirits, juices, water... â?¢ Filling valves with diam. 15mm (smaller or larger valves are available on demand for special use) Simple adjustment of the filling levels inside the bottle by means of quick-insertion spacers Pneumatic bottle seats lifting with height adjustment to fit different bottles. The up / down timing of the bottle seats can be adjusted according to the volume of the bottle, by means of timers: This system allows to adjust the filling timing, once the bottles are filled up the bottle-seats are lowering down. The time can be reduced when filling small bottles, to increase the production output. Product infeed with electric valve in stainless steel controlled by measuring probes. Electrical control panel predisposed for controlling the pump for the product. Controls and protection, all complying with EEC regulations. Possibility to fill glass bottles from 0,375 to 1,5 litres (bottles samples to be provided for confirmation) Supply: electric power and compressed air. OUTPUT : approx 600 x 75cl bottles/hour
Semiautomatic filling machine for Bag-in-Box can fill bag sizes starting from 2 to 20 liters. It is designed to fill foodstuff or other kind of liquid and semi-dense products (eg. wine, oil up to a maximum viscosity of 300 cps). Is possible to make hot-fill temperatures up to 45�?�° with a pump 80 lt/min. Dosing is made with electronic flow meter. The machine is equipped with: * a control panel which manages the filling volume, the vacuum time, nitrogen time, to start the filler cleaning and also can be stored ormats customized according to your needs, finally giving a statistic of the work performed. * vacuum switch with which is possible to realize the control faulty bags; * an inclined surface adjustable with rollers (or smooth surface) to help the descent of the bag into the box; * stainless steel frame on pivoting wheels, two of them with brake; * surface adjustable in height for boxes placement; * a system for nitrogen injection. BOTTLING HOUR CAPACITY : Capacity Output 3 lt...................160/180 bb/hour 5 lt.................. 130/150 bb/hour 10 lt.................110/130 bb/hour 15 lt...................90/110 bb/hour 20 lt...................80/100 bb/hour
Each casting machine can accommodate up to 6 moulds , upon customer request. The machine consists of a metal structure that supports a mobile platform on which the lower half-mould is anchored, and an upper platform on which the upper half-mould is anchored and which has the function of keeping the mould closed. The mould is kept closed between the two frames by means of pneumatic pistons, formed by a pneumatic gripping system, during the casting phase. The center of rotation is fixed The frames have the characteristic of being able to rotate in any position (flat, vertical or inclined depending on the operation to be performed). They are also equipped with micrometric adjustments to accommodate molds of all sizes. All sanitary ware composed of two or three parts (if the third part can be removed manually) such as: hanging pots and bidets ( made with moulds in three parts), washbasins of all kinds, washbasins and other special pieces The demolding of the pieces takes place through a special trolley on wheels supplied with the machine itself that is mechanically lifted The machine is suitable for small productions and productions that require frequent mold changes. The demolding of the pieces takes place above trolleys that can also have the function of piece storage.
Tinting station for dosing and mixing of paints. Delivery terms: FOB
Aromatique plant.
Photovoltaic plants and special door-locks without keys.
Ornamental live plants, trees, roses, pine trees, meditarean plants.
