Metal parts in iron, aluminium, stainless steel.
Catalytic converter scrap, copper wires scrap, ABS scrap, PVC scrap, HDPE film scrap, LDPE film, tyre wire scrap, used electric motor scrap, motherboards scrap, used conveyor belt, tyres scrap, PVB film, pet film scrap, latex gloves, PA6 yarn, PET bottles scrap, PU foam scrap, EPS blocks, copper cables scrap, compressor scraps, bopp film scrap, cast iron scrap, baby diaper scraps, used engines, tires scrap, tyres scrap.
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
Thermally strengthened periodically profiled steel rods of the diameter 6-40mm - the so called thermic is used for the construction of strategic reinforced concrete structures, GOST 10884-81. According to the standard this rebar is made out of these types of steel: AtIII - St (sp, ps); AtIV, AtIVK - 20GS, 25G2S, 35GS, 28S, 10GS2, 08G2S, 25S2P; AtV(K and SK) - 20GS, 20GS2, 08G2S, 10GS2, 28S, 25G2S, 35GS, 25S2R, 20HGS2; AtVII - 30HS2.
Good Morning , this is the quotations to Iron Ore Origin : Colombia Price : US$93.00 dollars Law : 62%: Payment : L/C Imcoterms : FOB Quantity Monthly 50,000 Milagros Cadenas Email: Mili64@hotmail.com
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
Steel square can be made of steel of various grades: carbon - St3, St20, St35; St45 low alloyed - Steel 40X, Steel 40XH; high-alloyed - 08 18 10; 40XH2MA; 38XH3MA; 14 17�?2 and others high-speed - U7; U7A; U8A
Iron ore Terms : FOB, CIF, Payment DLC / SBLC BG For minerals: payment 95% at loading Port after SGS, remaining 5% at destination Port after inspection. IMPORTANT: NO advance payment are request
iron fission residue
hello, We offer high quality iron ore fines with competitive prices and we are interested in cooperating with you. If you are interested, please contact us to discuss more details. Thank you very much for your interest, we look forward to cooperating with you. Best Regards,
WE HAVE CLEAN cast iron scrap SERIOUS BUYER SHOULD CONTACT US FOR MORE DETAILS
WE SELL CLEAN cast iron scrap SERIOUS BUYER SHOULD CONTACT US FOR MORE DETAILS
We supply rubber and silicone profiles with matrix construction. The elastomers used are EPDM, SBR, NBR, CR, SILICONE, NR, VITON, ACM, CSM, ECO in various hardnesses and colours. Sleeves / Tubes: Seamless, vulcanized on mandrel, in diameters 100, 200, 300 and 400 mm, intermediate and special sizes in para, silicone or other elastomers on request.
Steam iron with boiler.
Prefabricated attic - Prefabricated cement structure
Coaxial cables, lan cables supplier, wires supplier.
Copper hardware.
