PVC STRETCH FILM FOR FOOD WRAPPING AUTOMATC USE OR MANUAL USE FRESH MEAT, POULTRY, FRUIT AND VEGETABLES AND READY MEALS PVC CLING FILM LMF IN JUMBO ROLLS FOR CONVERTERS (CATERING ROLLS)
high range 3"1/2 magnum waste with PP plastic body, close without overflow outlet, with inox bright flange, fixing screw length 43mm for universal application on all standard sinks (inox/synthetics/ceramic); basket strainer with metal pivot and metal handle perfect to collect garbage during the normal usage of the kitchen sink, helping to keep the pipes of the siphon clean. Conform to the worldwide recognized European rule EN274 as per thightness and flow rate. PRICE FOR 1200 pcs FOB LA SPEZIA PORT ITALY AVAILABLE FOR PERSONALIZED OFFER AGAINST HIGHER QUANTITIES REQUEST.
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4 Mounting Base-ISO5211 Temperature--20 C - +80 C
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4
Steam pressure reducing valve manufacturer in Germany Do you want to know who makes the greatest Steam Pressure Reducing Valve Manufacturer in Germany? Germany's top producer of steam pressure lowering valves is Valvesonly Europe. A steam pressure reducing valve is a type of flow control valve that is designed to reduce the pressure of steam in a system to a desired level. Steam pressure reducing valves are typically installed in steam distribution systems, such as boilers and steam generators, to maintain a safe and efficient operating pressure for the system. The valve works by controlling the flow of steam through the valve body. The valve body typically has a tapered or globe shape, which allows for precise control of the flow rate. Inside the valve body, there is a valve disc, which is connected to the valve stem. The valve disc moves up or down, depending on the pressure of the steam entering the valve. When the steam pressure exceeds the desired set point, the valve disc closes, reducing the flow of steam and lowering the pressure. When the steam pressure drops below the set point, the valve disc opens, allowing more steam to flow through the valve and increasing the pressure. Valvesonly is the dominant Steam Pressure Reducing Valve Manufacturer in Germany which are well known for their commitments to quality. All the products are tested by our highly professional team before delivery to clients. A typical Steam Pressure Reducing Valve consists of: ï?¬ â?¢Valve Body ï?¬ â?¢Valve Disc ï?¬ â?¢Valve Stem ï?¬ â?¢Regulator (adjust the desired set point) ï?¬ â?¢Pressure gauge (monitors the pressure) Advantages of steam pressure reducing valve: â?¢ It is ideal for large loads â?¢ Less noise â?¢ Waterproof. â?¢ Suitable for high-pressure applications. Industries of steam pressure reducing valve: ï?¬ ï?¬Power generation ï?¬ ï?¬Oil and Gas ï?¬ ï?¬Marine and offshore ï?¬ ï?¬Pulp and paper ï?¬ ï?¬Textile Description: Body Materials: CF8, CF8M,Cast Iron, Wcb, Wcc, wc6,wc9, Ductile Iron, SS304, SS316,CF8M, SS316L, SS904L, Duplex Steel (F51,F53,5A,4A,6A), Super Duplex steel[55] Class:150 to 2500, PN10-PN450 Size: 1/2 to 24 End Connection: Socket weld butt weld, flanged, threaded
Triple Offset Butterfly Valve manufacturer in the topmost Triple Offset Butterfly Valve manufacturer in We provide high-quality and reliable valves at competitive prices. The triple offset butterfly valve is also known as a Triple eccentric butterfly valve. Because of its metal sealing, the thermal shocks and pressure peaks are getting reduced. This design allows for low-torque operation. The composite stainless steel sealing on our triple offset butterfly valve ensures that there is no leakage. This makes the valve more resistant to high temperature, high pressure, and corrosion. Whenever the valve body is opened or closed, there is no friction happens between the disc and the valve body throughout the rotation. What is a Butterfly Valve A butterfly valve is a member of the family of quarter-turn, bi-directional, rotary motion valves used to stop, control, or start flow. Quarter valves are the kind of valves that only require a quarter turn of the disc to fully open or fully close the flow. In order to transition from the completely open to the fully closed position, quarter turn valves simply need to be rotated 90 degrees. They are also known as fast-acting valves for this reason. The shape and movement of the plug give the butterfly valve its name. The plug has a rod running through it and is formed like a disc, giving it the appearance of wings. The disc rotates by a quarter when the rod is turned, falling perpendicular to the flow and stopping it. The disc is rotated back to its original position, which is away from the flow in order to restart the flow. To regulate the flow, the valve can also be opened gradually. Description: Class: 150 to 600 Material: Cast iron, Ductile iron, Stainless steel (SS304, SS316, F304, F316, CF8, CF8M, SS316L, SS409L), Carbon steel, Duplex steel. End Connection: Wafer, Lug, Flanged Size: Pressure: PN6 to PN300 Operation: Gear Operated, Electric Actuated, Pneumatic Actuated
Jacketed Plug valve in Manufacturer in Germany Valvesonly Europe is one of the best Jacketed plug valve manufacturer in Germany.The sleeve type of jacketed plug valve has simple structure, rapid opening and closing, small flow resistance, convenient maintenance, good sealed performance. Jacketed plug valves have a simple structure, are quick to open and close, have low flow resistance, are easy to maintain, and perform well when sealed. In the chemical, petroleum, and other industries, piping systems are controlled. Widely used in chemical, petroleum and other industrial piping system control. Valvesonly Europe manufacture amazing jacketed Plug Valve. It is often utilized in high-pressure temperature services. Functions: Widely used in chemical, petroleum and other industrial piping system control. It can reduce the heat loss of medium in the pipe, and transfer the high viscosity medium which will solidify in room temperature. Advantages: â?¢ Reduced leakage point Reduced effect of vibration The product has the ability to keep you warm and cold at the same time. It can minimize medium heat loss in the pipe and pass high viscosity medium that solidifies at room temperature. Jacketed plug valves can coherently handle gas, liquid fluid and extreme temperatures. Jacketed plug valves can be serviced and repaired at the site of operation. Industries that use Jacketed Plug Valve: Chemical service industry. Oil piping systems. body material: Wcb, Carbon steel, cast iron, ductile iron, SS304, SS316, alloy steel, stainless steel. class: 150-2500, PN10 PN450 size: to 24 Operation: gear operated, electric actuated, pneumatic actuated, lever. Ends: Socket weld, buttweld, flanged, threaded.
Brass valve manufacturer in Germany Valvesonly Europe is a leading Brass valve manufacturer in Germany. Brass Valve regulate the fluid passage by opening and closing inside the framework. Brass Valves help the control of fluids, gases, and slurries. They are also called controllers and are used in variety of purposes . Valves change in size, plan, capacity, and activity. Types of Brass Valve Ball Valve Gate Valve Globe Valve Check Valve Pressure Relief Valve Industries that use Brass Valve- Oil and Gas Industries Food and Beverages Industries Chemicals Industries Water and Wastewater Treatment Material: Brass(Alloy260, Alloy272, Alloy330, Alloy353, Alloy360, Alloy385, Alloy464, AlloyC48200-C48500). Pressure: PN6 - PN25 Ends: Threaded, Socket welt, Butt weld, Wafer, Lug Size:½ to 4 Operation: Gear, Pneumatic Actuator, Electric Actuator, Handwheel, Lever.
Brass valve manufacturer in Germany Valvesonly Europe is a leading Brass valve manufacturer in Germany. Brass Valve regulate the fluid passage by opening and closing inside the framework. Brass Valves help the control of fluids, gases, and slurries. They are also called controllers and are used in variety of purposes . Valves change in size, plan, capacity, and activity.
Brass valve manufacturer in Germany Valvesonly Europe is a leading Brass valve manufacturer in Germany. Brass Valve regulate the fluid passage by opening and closing inside the framework. Brass Valves help the control of fluids, gases, and slurries. They are also called controllers and are used in variety of purposes . Valves change in size, plan, capacity, and activity. Types of Brass Valve â?¢ Ball Valve â?¢ Gate Valve â?¢ Globe Valve â?¢ Check Valve â?¢ Pressure Relief Valve Industries that use Brass Valve- â?¢ Oil and Gas Industries â?¢ Food and Beverages Industries â?¢ Chemicals Industries â?¢ Water and Wastewater Treatment Material: Brass(Alloy260, Alloy272, Alloy330, Alloy353, Alloy360, Alloy385, Alloy464, AlloyC48200-C48500). Pressure: PN6 - PN25 Ends: Threaded, Socket welt, Butt weld, Wafer, Lug Size: �½ â??â?? to 4â??â?? Operation: Gear, Pneumatic Actuator, Electric Actuator, Handwheel, Lever.
Pressure Seal Globe Valve Manufacturer: Valvesonly Europe is the largest Pressure Seal Globe Valve Manufacturer. The pressure seal valve applies sufficient force against the internal diameter of the valve body and the bonnet surfaces. When the pressure in the device rises, so does the stress on the pressure seal gasket. A pressure seal globe valve is a valve design concept that offers distinct advantages over a conventional blasted body-to-hat fixing device. It employs the valve framework strain to provide adequate strength against the inside width of the valve body and the cap surfaces. As the framework pressure rises, so does the force on the pressing factor seal gasket. Pressure Seal Globe valves are commonly used in pipelines to control the flow of viscous fluids like gasoline. It is capable of monitoring both flow rate and on/off operations. Their name comes from their spherical body shape, which is divided into two parts by an internal baffle. Description: Body materials: Carbon steel, A105, F304, F316, F304L, F316L, F51, F53, F11, F22. Class: 150 - 2500. Size: 1/2''-48''. Ends: Socket weld, butt weld, flanged, threaded. Operation: handwheel operated, gear operated, electric actuated, pneumatic actuated. Pressure seal globe valve is used in many industries like: Petrochemical Industry Oil and Gas Industry Power Industry Chemical Industry Uses for a pressure seal valve include: A pressure seal valve is used to handle high pressure in power generation. Two interchangeable spring-loaded discs, a fully driven disc, and refining pins comprise the parallel slide gate assembly. Pressure Seal Globe Valves Have the Following Benefits: Excellent ability to switch off and on. Excellent throttling skills. Shorter stroke length. Seats are simple to resurface. May be used as a check-and-stop valve. Pressure Seal Globe Valves are used in a variety of applications: Water cooling systems. Devices that use fuel oil. Chemical or water-based feed systems. Key steam vents and drains, as well as the boiler. Turbine lube oil device
Pneumatic actuated ball valve manufacturer Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown. Features of Pneumatic Actuated Ball Valve It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features. The ability to open and close quickly. The actuator is small. Are you seeking for a reputable manufacturer of pneumatic ball valves With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality. Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316 Class 150 to 2500 Nominal Pressure PN6 to PN450 Size 12 to 48 Ends Flanged, Buttweld, Socket weld, Threaded. Operation Pneumatic Actuated For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/
Duplex Steel Globe Valve Manufacturer in Germany Valvesonly Europe is one of the best Duplex steel globe valve manufacturer in Germany. Duplex steel globe valves are a linear motion valve and are designed primarily to stop, start and regulate the through flow. The mechanism of the disk of a duplex steel globe valve can be totally removed from the flow path or it can completely close the flow path. We provide high-quality valves with a high level of protection without sacrificing quality. Steels of the duplex grade are used to make Duplex Steel Valves. With austenitic and ferritic phases in the microstructure, the duplex grade has high strength and corrosion resistance. These steels' metallurgy allows them to be used in a variety of applications. This material is used to make valves that are durable, solid, and corrosion resistant. Duplex Valves come in a variety of shapes and sizes, including ball valves and gate valves, and are used in a variety of applications. Advantages of Duplex Steel Valves: Good weldability and workability. Reliable and strong. Industries that use Duplex steel Valves: Water treatment plants Chemical industries. Uses of Duplex Globe Valve The Duplex Globe valve is used to shut off the medium's flow and is ideal for situations where the flow must be throttled constantly. It's a device that controls the movement of materials through pipelines. Duplex Globe Valve is use in many industries like: Sewage Industry Constructions Industry Food Industry Electric power Industry Medicine Industry Fluid Pipeline of liquid Industry Metallurgy and textile Industry Duplex steel Globe valves is a linear motion valve and are designed primarily to stop, start and regulate the through flow. The mechanism of the disk of a DSS Globe valve can be totally removed from the flow path or it can completely close the flow path. Function: used in severe throttling services, such as in bypass pipe lines around a control valve. throttling or control applications and where positive shutoff is required on/off duty, provided the high resistance from the change in flow direction is not objectionable Body material: Duplex stainless steel(F51, F53, 4A,5A,6A). Class: 150 to 2500, PN16 to PN450 End: flanged, buttweld, socket weld. Operation: handwheel, electric actuated, pneumatic actuated, Gear. Size:1/2 to 24
EC FERTILIZER Magnesium sulphate COMPOSITION - Magnesium oxide (MgO) soluble in water 16% - Sulfur dioxide (SO3) soluble in water 32%
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
Steel square can be made of steel of various grades: carbon - St3, St20, St35; St45 low alloyed - Steel 40X, Steel 40XH; high-alloyed - 08 18 10; 40XH2MA; 38XH3MA; 14 17�?2 and others high-speed - U7; U7A; U8A
