Iron ore.
Our grey cast iron pipe fittings are in accordance with the standards: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 etc. Through lost foam casting process, we produce cast iron soil pipe fittings such as elbows, tees, cross and so on. GB/T 12772, ISO 6594, ASTM A888/CISP 130,BS EN877, KSD 4307.
Fe 63/61%.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 (BS EN1092-2:1997, DIN2501) Use : For water , sewage and neutral liquids to max .70C The dismantling joint enables easy installation and dismantling of isolating valves , non return valves , flow metering equipment , pumps etc. It compensates for axial displacement of the pipe during installation/dismantling . Features: 1) Follower gland ring : Ductile Iron GGG500-7 2) Flanged Adaptor bodies : Ductil iron GGG500-7 3) F-piece pipe : Ductile iron GGG500-7 4) Bolts, Nuts and Washers Material : Carbon Steel Grade 4.8 with Zinc Coating , Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 5) Tie Rods : Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 6) Gaskets material : For water or Gas : NBR Grade A . For drinking water : EPDM rubber to BS2494:1990 type W . For drinking water and sewage : SBR Grade F . 7) Body Coating : Fusion Bonded Epoxy Coating inside and outside or bitumen 8) Sizes : DN50 - DN2000 9) Pressure Grade : PN10 / 16 / 25 10) Package : Bubble plastic bags, Cartons and Wooden cases. Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 ( BS EN1092-2:1997,DIN2501).
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
Material: HT150( gray cast iron) Making process: Centrifugal casting process Standard: GB/T12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522 Specification: Inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length Function characteristics: The cast iron soil pipe or cast iron sewage pipe is produced by centrifugal casting process. The centrifugal cast iron soil pipe and cast iron pipe fittings are flexibly connected through stainless steel couplings with high quality rubber sealing gasket inside it. Standard: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522. Specification: inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length.
Material: SAE1006/1008 acc. to ASTM A510M Tensile strength: 350-450 N/mm2 Size tolerances: acc DIN 177, Bales of 5/10/20 coils, tied up with three iron signode and wrapped with extensible foiltrapped with iron hoo signode and wrapped with extensible foil,
Cast iron casting.
Foundry grade pig iron Loose in containers
Brazilian iron ore 64, 5 - 63, 5 145usd/mt Peru iron ore 64, 5 63, 5 142 usd/mt. 1 millon ton year skyp carlos.barrientos.wetzel Bulk in vessel.
Iron ore 58.5% - 61% Fe Contracts of 60.000 tons x 12 offered
Iron Castings 2kg-2000kg
* Country of origin: Philippines * Specification: Fe: 55.21% - Ti: 7.22% - Mn: 0.43% * Quantity: 30,000 - 60,000MT per months or 600,000MT per year per site location * Discharge port: Manila Port * Loading port: Any port in China, Korea, Japan, India
Iron ore
Galvanized wire 1.Hot dip galvanized wire or galvanized wire 2.Wire gauge:0.5mm-6.0mm 3.Zinc coated:30g-250g 4.Certificate:ISO9001:2000 5.Uses: in weaving mesh, construction and resident Galvanized Iron Wire : Technical information processing with low carbon steel wire, through drawing and electric galvanizing standard wire gauge from 8 BWG to 26BWG Electric galvanized iron wire uses in weaving of wire mesh, fencing for expressway and construction. Hot-dipped galvanized iron wire technical information Material: Super carbon steel processing by drawing, hot-dipped galvanizing, standard wire gauge from 8BWG to 26BWG Thick zinc-coating layer super in corrosion resistance firm coating layer. Package :1>in coil of 5 ,10 ,20 kgs/ lined with PVC strips and wrapped with PVC woven cloth 2>Wrapped around the shaft then put in a carton 3>Plastic woven bag lined with plastic film inside 4> According the customers' advise
All grades of pig iron
Iron ore
Wrought iron
Square gauge summary Square gauge include feet ,angle plate and so on (Special tool to 90 degrees). Used to test the verticality of workpiece and equipment installing. Installation and scribing orientation of mechanical industry is an important measurement tools. It is characteristic of high accuracy, good stability, convenient in maintenance. Dimension :(We can make the products according to customer 's design ) Additional remark Some graphics and description in the instruction menual are just as a instruction, please according to real product. This instruction manual dosen't effect the product performance, safety and customer usage. If there is a difference between our product, for the promotion of our products , please according to the real product, no other explan Typeú¿mm) Squareness between measuring surface and datum surface Flatness and straightness of measuring surface Flatness and straightness of datumsurface Precision Grade (ª¦m) 00 0 00 0 00 0 100í-63 2 4 1 1 1 1 160í-100 2 4 1 2 1 1 250í-160 2.5 5 1 2 1 2 400í-250 3.5 7 1 2.5 1 2 630í-400 4.5 9 1.5 3 1 2.5 1000í-630 6 12 2.5 5 1.5 5. Size :500*100*40-3000*200*80mm Packing :Wooden box Detalis :7-30days after you order.
