We are ready to buy Iron ore fine all grades in Indian major ports.
Fe 64.5% Min rejection below: 63.5% SiO2 3.5% Max rejection above: 4.0% Al2O3 0.50% Max rejection above: 2.0% Sulfur 0.04% Max rejection above: 0.08% Phosphorus 0.06% Max rejection above: 0.08% Mn 0.09% CaO 0.20% K2O 0.02% Chromium 0.005% Ca 0.21% Zinc 0.08% Total Moisture 6% Rejection above 8% Physical Characteristics: 14.00 mm ~8 mm 7% max. 7.99 mm~ 3mm 10% max. 2.99 mm ~ 1 mm 65% min. Bulk
Fe (iron) 64.50% Rejection below 63.5 % Free Moisture Loss at 105 Degree Centigrade Max. 8% Physical characteristics: *10.00 mm ~ 5 mm 10% max * 4.99 mm ~ 3 mm 60% min * 2.99 mm ~ 0.15 mm 30% min* . Bulk.
Iron ore
Iron ore of 63.5% readily available with us any quantity.
Al2o3-3.50%max Sio2-3.50%max Phosphorus-0.06% Sulphur-0.06% Moisture-8%at 105 degree centigrade Physical Composition-0-10MM-90%MIN Above 10MM 10%MAX Below 0.15MM 45%MAX.
Fe 63% and below Indonesia origin quantity 6000-30000 MT payment at cash or L/C 100% at sight. Buyer and company user only can have a deal with us not brokers. In bulk.
Bwg6-22 5.0mm-0.7mm Zinc coat: 10-20g/m2 Tensile strength: 35-55kgf/mm2, 350-550n/mm2. Packing :10-800kg/coil plastic inside and hassian outside/ weave outside. Used in construction binding, wire mesh, expressway fencing, chain link fence , handicrafts and other fields. Production process of electro galvanized iron wire: Steel rod coil -- wire drawing -- wire annealing--rust removing-- acid washing-- boiling-- drying-- zinc feeding-- wire coiling. Optional information - HS code : 7217200000 wire of iron or non-alloy steel - Payment : l/c or t/t - Delivery : tianjin port - Origin : china - Minimum order : 20mt / 1x20'g. 10-800kg/coil plastic inside and hassian outside/ weave outside.
BWG8-14 4.0MM-2.0MM PVC coated rate:0.6-1.0mm Tensile strength: 35-50kgf/mm2 Packing :10-500kg/coil plastic inside and hassian outside/ weave outside. Used for wire mesh, chain link fence, highway fence, gabion box, reno mattress, rockfall netting. 10-500kg/coil plastic inside and hassian outside/ weave outside.
Coating: Zinc coated, galfan . Dia.Meter: 5.0mm-0.9mm Min zincing weight: 40g/m2 Tensile strength: 35-55kgf/mm2, 350-550n/mm2. Standard: BS or ASTM Packing: coil and pallet Production process of electro galvanized iron wire: Steel rod coil -- wire drawing -- wire annealing--rust removing-- acid washing-- boiling-- drying-- zinc feeding-- wire coiling. Optional information - Hs code : 7217200000 wire of iron or non-alloy steel - Payment : l/c or t/t - Delivery : tianjin port - Origin : china - Minimum order : 20mt / 1x20'gp. Coil and pallet.
Bwg6-22 5.0mm-0.7mm Tensile strength: 30-50kg/mm2 Packing :10-200kg/coil plastic inside and hassian outside/ weave outside. Used : in woven wire mesh , wire tie, construction or daily using as binding material. Soft annealed wire is flexibily and soft through the process of oxygen free annealing . Optional information - hs code : 7217100000 wire of iron or non-alloy steel - payment : l/c or t/t - delivery : tianjin port - origin : china Minimum order : 20mt, 1x20'gp. 10-200kg/coil plastic inside and hassian outside/ weave outside.
We can supply Iron ore fine 64.5% -63.5% or 63% -61% ,60.8/% from India. Please come back with your requirements.
Different kinds of cast iron.
ISO Section ISO standard casting Standard Grade Grade Grade ISO standard ISO Standard Grade 800 / 2,700 / 2,600 / 3,500 / 7, 450/10, 400/15, 400/18 350/22 The average thickness of the C% Si% Mn% *) C% Si% Mn% *) C% Si% Mn% *) C% Si% **) Mn% *) 13mm 3.6-3.8 2.6-2.8 0.5 3.6-3.8 2.6-2.8 0.3 3.6-3.8 2.6-2.8 0.2 3.6-3.8 2-2.5 0.1 13-25mm 3.5-3.6 2.2-2.5 0.6 3.5-3.6 2.2-2.5 0.35 3.5-3.6 2.2-2.5 0.25 3.5-3.6 2-2.5 0.15 25-50mm 3.4-3.5 2.1-2.3 0.7 3.5-3.6 2.2-2.4 0.4 3.5-3.6 2.2-2.4 0.3 3.5-3.6 2-2.4 0.15 50-100mm 3.4-3.5 1.9-2.1 0.8 3.4-3.5 2.0-2.2 0.5 3.4-3.5 2.0-2.2 0.35 3.4-3.5 1.8-2 0.2 100mm 3.4-3.5 1.8-2.0 0.8 3.4-3.5 1.8-2.0 0.6 3.4-3.5 1.8-2.0 0.4 3.4-3.5 1.8-2 0.25. Packaging can provide pallets, crates and other packaging. Weight in 1T-2T.
Iron ore.
Our grey cast iron pipe fittings are in accordance with the standards: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 etc. Through lost foam casting process, we produce cast iron soil pipe fittings such as elbows, tees, cross and so on. GB/T 12772, ISO 6594, ASTM A888/CISP 130,BS EN877, KSD 4307.
Fe 63/61%.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 (BS EN1092-2:1997, DIN2501) Use : For water , sewage and neutral liquids to max .70C The dismantling joint enables easy installation and dismantling of isolating valves , non return valves , flow metering equipment , pumps etc. It compensates for axial displacement of the pipe during installation/dismantling . Features: 1) Follower gland ring : Ductile Iron GGG500-7 2) Flanged Adaptor bodies : Ductil iron GGG500-7 3) F-piece pipe : Ductile iron GGG500-7 4) Bolts, Nuts and Washers Material : Carbon Steel Grade 4.8 with Zinc Coating , Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 5) Tie Rods : Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 6) Gaskets material : For water or Gas : NBR Grade A . For drinking water : EPDM rubber to BS2494:1990 type W . For drinking water and sewage : SBR Grade F . 7) Body Coating : Fusion Bonded Epoxy Coating inside and outside or bitumen 8) Sizes : DN50 - DN2000 9) Pressure Grade : PN10 / 16 / 25 10) Package : Bubble plastic bags, Cartons and Wooden cases. Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 ( BS EN1092-2:1997,DIN2501).
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
