Ductile iron Drainage pipe Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. ductile iron pipeline wholesale have a number of advantages over other pipe materials: Easy to install Full range of accessories are widely available Suited to a host of applications both above and below ground Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe price list is very reasonable. Cast iron pipe drain pipe the cast iron sewage pipe and the cast iron gas pipe are widely used. The wall thickness of the 150mm cast iron pipe is 6mm. More information.
Ductile iron feed pipe Ductile iron feed pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. Ductile iron feed pipe supplier is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). ductile pipe manufacturer is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. Tongmao Ductile iron feed pipe have a number of advantages over other pipe materials: Easy to install Full range of accessories are widely available Suited to a host of applications both above and below ground Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe lengths is generally six meters, which can also be customized. If you want to know the ductile iron pipe sizes and dimensions, please contact us.
Cast iron (GG15, GG20, GG25), Ductile Iron (GGG30, GGG40, GGG50, GGG60), Cast steel (X20Cr13), Alloy steel, Stainless steel (SS304, SS310, SS316), etc. metals are carefully manufactured with our 7 ton casting capacity (in one pot). In our R&D unit, within our structure, products suitable for your demands are started drawing, design and processing with your final approval. The control of drawing, design, casting and labor costs control by us. That's the basis of to produce quality products.
We are manufacturing rack brackets as per customer requirements. the materials used are Stainless steel, Mild Steel, Galvanized Plain sheets. manufacturing range is as below, Stainless steel (grade-304 & 202)- Thickness- 1mm to 4 mm Mild Steel -Thickness- 1mm to 22mm, finishing-powder coated Galvanized plain sheet- Thickness -1mm to 22mm
Grey Iron Casted Parts According To Your Technical Specs, Please Contact For Detailed Information
Pig Iron Casted Parts, We Are Able To Cast Parts ACCording Your Technical Specs, Please Contact For Details
Hello everyone. we are removing hematite iron ore in Mersin / Turkey. This is a new field. We got all their legal permissions. The area is very close to Turkey / Mersin sea port in Mediterranean. It is in a hot area. Iron can be removed for 12 months. Total ore is 360,000 tons, our target is 30,000 tons per month. iron tenor above 55%. If you contact me, I can send test reports. Respects
We will remove the Hematite Iron Ore in Turkey / Mersin / Anamur. There will be no intermediaries in this business. we are targeting 25.000 Tons per month. total 300.000 tons. our place is close to the Mersin sea port. Mersin is a hot region. We can extract it for 12 months. average 60% tenor.
Dear Customer, We can provide you Mexican origin iron ore. Price Platts - 10%
COMMODITY : Hematite Iron Ore, GRADE : 60% and above, QUANTITY CAPACITY : 200000 mt per month, LOAD PORT : Durban Port, S.A.
INVESTMENT CASTINGS BY LOST WAX PROCESS. CARBON STEEL SAE - 1020, 1030, 1040, 4140, WCA, WCB, WCC, LCA, LCB, EN-8, EN-9, EN-36 AUSTENITIC STAINLESS STEEL CF8 , CF8M , CF3 , CF3M, CF8C, CF8 (NM), CF3M (NM), CK-20, CN-7M (Alloy 20) MARTENSITIC STAINLESS STEEL 410 (CA-15) , 420 (CA-40), 431, 440C DUPLEX STAINLESS STEEL CD-4MCu, CD-4MCuN, CD3MCuN, CE3MN,CD3MN PH STAINLESS STEEL CB7Cu-1 (17-4PH), CB7Cu-2(15-5PH) SUPER ALLOYS HAST- B, HAST-C,HAST-B3, STELLITE-6, STELLITE-3, CZ- 100, Monel NON-FERROUS MATERIALS ALUMINIUM BRONZE, BRASS, GUN METALS [ALL GRADES]
Pure Magnetite iron ores with Si02=0.65, Al2o3 = 0.00, Fe2o3= 131.3, Cao=0.0, Mgo=0.0, K2o= 0.05, Na2o=0.0, So3=0.65 and Cl=0.0 ==>> SUM= 131.30 It is 100% pure Fe in mineral form. we can supply up to 50,000 per month. Payment terms: DLC/SBLC MT700/MT760 at destination port after SGS inspection for quality and quantity. This is a pure iron mountain in Yemen where our company based on;180 km away ftom the port. Price:400 USD per ton, FOB Aden Port, Yemen.
Iron Ore fines 61.77 Fe%, 10% Humidity, Fob Topolobampo, Sinaloa, Mexico 60,000 Metric tons every other month.
We Are Selling Iron Ore Fines Hight Grade 65% To 72 % Fe Quantity 50,000 Mt Per Month LOADING 1 SP BRAZI SALE FOB OR CIF TERMS DLC CONFIRMED AT SIGHT 5 AT LOADING 95% AND 5 % AT CIQ FINAL REPORT PB 2 % Accepted Analisys Sgs Or As Per Buyer Request First Shipment None Documents Available Price To Negotiated Base On Iodex Discounted
IRON ORE (ALL GRADE) Specification: Fe 62.79% (P: 0.0056 / S: 0.005 / Fe0: 12.34 / Al2O3: 2.092 / SiO2: 7.694) Fe 63.28% (P: 0.00 / S: 0.06 / Fe0: 5.36 / Al2O3: 1.00 / SiO2: 4.30) Fe 64.26% (P: 0.068 / S: 0.002 / Fe2O3: 91.44 / Al2O3: 0.674 / SiO2: 3.156) Fe 64.71% (P: 0.08 / S: 0.19 / Fe0: 19.53 / Al2O3: 0.82 / SiO2: 4.87) Fe 66.30% (P: 0.042 / S: 0.036 / FeO: 17.33 / Al2O3: 0.359 / SiO2: 3.856)
IRON ORE (ALL GRADE) Specification: Fe 62.79% (P: 0.0056 / S: 0.005 / Fe0: 12.34 / Al2O3: 2.092 / SiO2: 7.694) Fe 63.28% (P: 0.00 / S: 0.06 / Fe0: 5.36 / Al2O3: 1.00 / SiO2: 4.30) Fe 64.26% (P: 0.068 / S: 0.002 / Fe2O3: 91.44 / Al2O3: 0.674 / SiO2: 3.156) Fe 64.71% (P: 0.08 / S: 0.19 / Fe0: 19.53 / Al2O3: 0.82 / SiO2: 4.87) Fe 66.30% (P: 0.042 / S: 0.036 / FeO: 17.33 / Al2O3: 0.359 / SiO2: 3.856) BAUXITE: (Au 1.00 gr/ton) (Ag 453.00 gr/ton) (Al2O3 45.22%) ( Cl 16.72%) (SiO3 8.94%) (FeO2 7.17%) (CaO 6.27%) (MnO 0.81%) (CuO 3.30%) (K2O 6.05%) (Pbo 0.11%) (SrO 0.29%) (ZnO 1.24%) (TiO3 1.29%) (AsO3 0.01%) ALUMINIUM SCRAP: (SI 7.849) (Fe 0.610) (Cu 2.557) (Mn 0.258) (Mg .0128) (Cr .025) (Ti 0.116) (Pb 0.031) (Sn 0.022) (V 0.014) (Sr 0.0028) (Zr 0.0098) (B
Container casting corner fitting Place of Origin:Shandong, China Brand Name:BST Model Number:ISO Name:casting corner fitting Material:Casting steel Dimensions:Standard Surface treatment:Shop primer and Raw Approval:with BV ABS CSC Technology:iso 1161 container corner casting working at -40 degree Certificate:ABS/BV Application:container house or shipping container
We provide iron ore(magnetite). Grades: 60-64%,62-65%,65-69%. Ore size:Lumps(5mm-20mm) or Powder iron ore(70-140 micron). payment method:LC Origin:mining company from Turkey. Metalconvv
We provide iron ore(magnetite). Grades: 60-64%,62-65%,65-69%. Ore size:Lumps(5mm-20mm) or Powder iron ore(70-140 micron). payment method:LC Origin:mining company from Turkey. Metalconvv
We provide iron ore(magnetite). Grades: 60-64%,62-65%,65-69%. Ore size:Lumps(5mm-20mm) or Powder iron ore(70-140 micron). payment method:LC Origin:mining company from Turkey. Metalconvv
