Jasu isb800-3 is a one stage injection blow molding machine (not from performs) for pet, pc and pp containers. The machine is capable of accepting 6 cavities.
Fully automatic, single step, injection stretch blow moulding machines to produce containers from 0.3 litres up to 1
Features
Application
Cosmetic
Medical consumables
Pharmaceutical
Hospital products
Health-care
Tablets containers
This is an semi and full automatic shoes molding production line(insole, outsole, safety shoes, ect) newly developed by us. The old system is manual system which needs to open and close the molds by hands. But the automatic one, the worker only needs pressing a button to open and close the molds, it is easier to operate and also can save the labor cost.
It is turntable production line not annular as manual system, it required less occupancy space than manual one.
Ystem. By using fangyuan
Patent sensitive pressure control and large flow steam system, requiring
Steam pressure +/-0.1-0.15mpa only, and the tolerance stays within 0.1bar.
The company is synonym of high Italian technology in the production of injection moulding machines for thermoplastic materials.
The production includes small, medium and large machines, suitable for different solutions in different industrial fields.
- small machines with two platen technology
- large range, standard platen and wide platen solutions, from 180 to 1000 ton
- special machines for the packaging sector
The company wishes to get in contact with importers and wholesalers, representatives or agents as well as trading companies, interested in its products.
Target countries: worldwide
1882 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
Cm-9a stretch blow-moulding machine is an economical machine for blowing various pet bottles of max. Volume up to 5l. This set of machines uses rotary infrared oven for preheating with high production capacity. Features of cm-9a are automatic control, high output, working safety, simple structure, convenient in operation and less power needed. It is an ideal equipment to make mineral water bottle, shampoo bottle, washing bottle, edible oil bottle, wine bottle, pharmacy container, milk bottle and other daily usage bottles and containers from 50ml to 20l with different shape and neck diameter
Specifications:
Bottle volume: 0.1l to 5lmax. Production capacity: 500 to 750 bph ( 0.1l to 2l) 150 to 180 bph (2l to 5l)mould-clamping pressure: 10kgmax. Size of mould: 300mmmax. Mould opening stroke: 280mmmax. Mouth diameter of bottle preform: 120mmmax. Length of bottle preform: 250mmmax. Heating speed of preform: 1800pcs/h
Pet bottle blow moulding machine to make mineral water bottle, shampoo bottle, washing bottle, edible oil bottle, wine bottle, pharmacy container, milk bottle and other daily usage bottles and containers from 50ml to 20l with different shape and neck diameter:
Isemi-automatic blow molding machines:
1cm-9a stretch blow molding machine for pet bottle from 0.1l to 5l
2cm-9b stretch blow molding machine for pet bottle from 5l to 10l
3kintl-5g stretch blow molding machine for pet bottle up to 5 gallon
Iiautomatic blow molding machines:
1cm-a2b automatic blow molding machine with single cavity moulds for pet bottle up to 5l
2cm-a2 automatic blow molding machine with 2 cavities moulds for pet bottle up to 2l
3cm-a4 automatic blow molding machine with 4 cavities moulds for pet bottle up to 2l
4cm-a6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l
Iiiautomatic rotary blow molding machines:
1cm-g4 automatic rotary blow molding machine with 4 cavities moulds for pet bottle up to 2l
2cm-g6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l
We also supply following products:
1various moulds for preforms and bottles
2bottling lines
3preforms and caps
4injection molding machine to make preforms and caps
Make: JSW
Model: J850EII
New : 1998
Specfication:
Screw Diameter: 100 mm
Injection Pressure: 1,730 kg/cm2
Theoretical Injection Capacity: 3,788 cm3
Injection Weight (PS): 3,429 g
Injection Rate: 840 cm3/sec
Plasticizing Capacity (PS): 470 kg/h
Screw SpeedHigh Torque: 75 rpm
Low Torque: 150 rpm
Nozzle Output: 50 mm
Injection Head: Open Nozzle
Cylinder Temperature Regulator : Cylinder 4, Nozzle 1
Clamping Method: Double Toggle
Clamping Force: 850 ton
Daylight: 2,300 mm
Clamping Stroke: 1,200 mm
Mold Thickness: 550 – 1,100 mm
Distance between Tie Rods (H x V): 1,060 x 1,060 mm
Platen Size (H x V): 1,560 x 1,560 mm
Ejector Method: Hydraulic Cross (29 points)
Ejector Force x Stroke: 23.1 ton x 200 mm
Mold Open/Shut Speed (Shut - Open): 67 m/min - 65 m/min
Pump Motor: 105 kW
Heater: 35.83 kW
Oil Tank Capacity: 1,360 L
Total Electricity: 143 kW
Machine Size (L x W x H): 11.0 x 2.5 x 2.6 m
Machine Weight: 43 ton.
Special drying chicken manure machine produced by our company is highly efficient, energy-saving new products; the project is applicable to large and small farms, aquaculture in more developed regions.
The machinery is divided into large and small.
2. Equipment capabilities
1). width of raw materail : 60mm- 860mm
2). Product speed by punching: 2.5-5m/min
3). Continuous roll forming speed: 10-15m/min
4). Material thickness: 1-2mm
5). Material require: Q235 cold roll steel
6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc.
4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
4.2 Flatting
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel
4.3 Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench
4.4 Servo feeding
1. electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servo meter
4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing
4.6 Guider
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.
4.7 Main roll forming machine.
Type
GY180(Extra wide)
Rack structure
Dragon Gate type memorial arch frame
4.9 Electrical control
4.9.1 Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touch screens
5) All electrical element is the Mitsubishi original installation brand
4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control type : Manual handle
5. After-sale service
1. We see to the equipment's installment, the debugging and free training operators
2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).
Naroto is rotational moulding machine manufactruing and supplier company based in india, we are also export plastic moulding machines, rock n roll machineservices in India.
Product id: tec series
1. The injection molding robot-mini traversing robots are extensively applied to plastic injection molding machine 50t ~ 150t.
2. The mini traversing robots can rapid take out the runners, sprues and find products from the mold of plastic injection molding machine.
3. The mini traversing robots can achieve factory inline automatically system.
Dialog controller, easy to control
1. The control system meets ce, spi and euromap standards, which is compatible with injection molding machines all over the world.
2. Remote controller with the lcd display for easy reading. The screen capacity is 100 chinese characters.
3. Choice of english / chinese displays on screen.
4. 16 bit dual cpu provides powerful editing functions for deletion, insertion and replacement.
5. The program copy function, in conjunction with the edit and modification function, provides easy program editing and modification.
6. 60 sets standard programs combined with 40 sets edit meets requirements for any type of mold.
7. Machine interface contains: mold clamp interlock, injection interlock, mold eject interlock, safety door control, product counting and cycle time.
8. Specially designed outside mold hold function suits extra high molds and molds with core cylinders. This prevents molds bumping against the robot.
9. Middle platen confirmation device (optional): a safety guard to prevent the middle platen bumping against the robot resulting from incorrect positioning of middle platen.
Screw barrel:38crrm nitriding
Gear-box:hard-toothed cover
Vacuum venting device:vacuum degree:0.08mpa
Forecd feeding system motor power:1.1kw
Electric machine: low pressure electric machine:simenz;
Temperature control: omron, intelligence module control
Scerw diameter:80/156 alloy
Screw rotary speed:1-36.9rpm.
Main moter power:55kw, frequency control
Frequency adjuster: fuji
Barrel heating power: 36kw cast aluminum heating ring;
Stainless steel out shell, air-cool constant temperature
11.Capacity:>400kg/h
The process is used to recycle big capacity and stable quality raw material, especially for psf manufacturer and recycled poy manufacturer with big capacity. The process flowchart as below:
De-baling----- label scrapping------ label separation------- bottle pre-washing--------manual sorting and metal detecting-----wet grinding-------gravity separation-------chemical washing for pet flakes-------rinsing--------drying--------packing.
Specification:
Power : ~380 kw
Capacity : 3 mt/hour input
Area requirement: 1000m2.
Flakes quality criteria:
Size: 1 mm ~ 12 mm
Humidity: 1.5 %
Pe, pp: 20 ppm
Paper, wood: 20 ppm
Glues/hot melts: 20 ppm
Organics: 20 ppm
Inorganic particles: 20 ppm
Ferrous and non-ferrous metals: 20 ppm
Pvc: 30 ppm. Our pre-washing process can make pvc become distinguishable. But the efficiency of labors in bottle sorting unit is important.
Colored pet flake: should be less than 20 ppm. But it should depend on efficiency of bottle sorting labors.
1 it can smash any plastic material rapidly and can be applied on several usages. Ití»s a smasher with full power.
2 the big plastic materials can be smashed directly without blocking which will result in the stopping of smash. So it can save a lot of time.
3 with water cooling system and the clearance between cutters provide facilities of heat dissipation in order to reduce damage effect between bearings and machine bodies and lessen the depreciation of steel characteristics.
Specification:
Power : 75kw
Capacity :maximum 1600kgs/hour at 12mm hole in the screen
Dimension: l1800 x w1500x h2400 mm.
Seaworthy packing
1882 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
