Pet bottle blow moulding machine to make mineral water bottle, shampoo bottle, washing bottle, edible oil bottle, wine bottle, pharmacy container, milk bottle and other daily usage bottles and containers from 50ml to 20l with different shape and neck diameter: Isemi-automatic blow molding machines: 1cm-9a stretch blow molding machine for pet bottle from 0.1l to 5l 2cm-9b stretch blow molding machine for pet bottle from 5l to 10l 3kintl-5g stretch blow molding machine for pet bottle up to 5 gallon Iiautomatic blow molding machines: 1cm-a2b automatic blow molding machine with single cavity moulds for pet bottle up to 5l 2cm-a2 automatic blow molding machine with 2 cavities moulds for pet bottle up to 2l 3cm-a4 automatic blow molding machine with 4 cavities moulds for pet bottle up to 2l 4cm-a6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l Iiiautomatic rotary blow molding machines: 1cm-g4 automatic rotary blow molding machine with 4 cavities moulds for pet bottle up to 2l 2cm-g6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l We also supply following products: 1various moulds for preforms and bottles 2bottling lines 3preforms and caps 4injection molding machine to make preforms and caps
Make: JSW Model: J850EII New : 1998 Specfication: Screw Diameter: 100 mm Injection Pressure: 1,730 kg/cm2 Theoretical Injection Capacity: 3,788 cm3 Injection Weight (PS): 3,429 g Injection Rate: 840 cm3/sec Plasticizing Capacity (PS): 470 kg/h Screw SpeedHigh Torque: 75 rpm Low Torque: 150 rpm Nozzle Output: 50 mm Injection Head: Open Nozzle Cylinder Temperature Regulator : Cylinder 4, Nozzle 1 Clamping Method: Double Toggle Clamping Force: 850 ton Daylight: 2,300 mm Clamping Stroke: 1,200 mm Mold Thickness: 550 – 1,100 mm Distance between Tie Rods (H x V): 1,060 x 1,060 mm Platen Size (H x V): 1,560 x 1,560 mm Ejector Method: Hydraulic Cross (29 points) Ejector Force x Stroke: 23.1 ton x 200 mm Mold Open/Shut Speed (Shut - Open): 67 m/min - 65 m/min Pump Motor: 105 kW Heater: 35.83 kW Oil Tank Capacity: 1,360 L Total Electricity: 143 kW Machine Size (L x W x H): 11.0 x 2.5 x 2.6 m Machine Weight: 43 ton.
Plastic injection moulding machine. We have used plastic injection moulding machines from 7 ton to850ton in stock for sale.
Special drying chicken manure machine Special drying chicken manure machine produced by our company is highly efficient, energy-saving new products; the project is applicable to large and small farms, aquaculture in more developed regions. The machinery is divided into large and small. in export container
From 78 ton to 1100 ton.
Detailed Product Description 1)Cable tray roll forming machine 2)Thickness:1-2mm 3)Drive type:gear box 4)Forming speed:10-15m/min 4)Certification:CE Cable Tray Roll Forming Machine 1.Forming processing Uncoiler-flatting-clamp&punchine-positioning cutting-forming-collection 2. Equipment capabilities 1). width of raw materail : 60mm- 860mm 2). Product speed by punching: 2.5-5m/min 3). Continuous roll forming speed: 10-15m/min 4). Material thickness: 1-2mm 5). Material require: Q235 cold roll steel 6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work. 3. Main composition of machine This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc. 4. Each part major technical parameters 4.1 Drive decoiler 1). Material width 860mm 2). Material weight 6000kg 3). Material outer diameter 1200mm 4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor 5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever. 4.2 Flatting 1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls. 2) Flatting bound: Material thickness 1-2mm, material width 100-860mm 3) Drive power: 5.5kw frequency conversion electromotor 4) Speed reducer model: ZQ250 5) Flatting speed: 3-10 m/min 6) Parenthesis up and down a pair of fortified wheel 4.3 Continual punching mould 1. Amount: Each kind of width specification 1 set dies, total 6 sets 2. Die require: Cr12 quench 4.4 Servo feeding 1. electromotor power: 4.4kw 2. Multistage type feeding, memory ten group of memory functions 3. Man-machine contact surface numerical control system 4. Uses Mitsubishi servo meter 4.5 Holds material (use in cushion section) The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing 4.6 Guider A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets. 4.7 Main roll forming machine. Type GY180(Extra wide) Rack structure Dragon Gate type memorial arch frame Forming frame 16 sets Forming variety Bridge frame Material max width 860mm Material max thickness ¡Ü 2.0mm Forming width 100-900mm The diameter of the roller axis 85mm Roll mould material Gcr15 Quenching treatment HRC58-62 Drive type 30kw frequency conversion electromotor 4.8 Hydraulic cutting 1. Hydraulic pumping station: 5.5kw 2. blade material : Cr12, quench treatment 4.9 Electrical control 4.9.1 Main operation control cubicle 1) Amount: 1 set 2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine) 3) PLC control: 1 set 4)8 inch liquid crystal touch screens 5) All electrical element is the Mitsubishi original installation brand 4.9.2 assistant control cubicle Amount: 3 sets (follow decoiler, flatting, roll forming machine) Control type : Manual handle 5. After-sale service 1. We see to the equipment's installment, the debugging and free training operators 2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).
Naroto is rotational moulding machine manufactruing and supplier company based in india, we are also export plastic moulding machines, rock n roll machineservices in India.
Machine is fully automatic operation. There are 8 & 12 stations Suitabel for pvc, tpr material. Machine is high capacity and fully automatic operation By one 40' container
Product id: tec series 1. The injection molding robot-mini traversing robots are extensively applied to plastic injection molding machine 50t ~ 150t. 2. The mini traversing robots can rapid take out the runners, sprues and find products from the mold of plastic injection molding machine. 3. The mini traversing robots can achieve factory inline automatically system. Dialog controller, easy to control 1. The control system meets ce, spi and euromap standards, which is compatible with injection molding machines all over the world. 2. Remote controller with the lcd display for easy reading. The screen capacity is 100 chinese characters. 3. Choice of english / chinese displays on screen. 4. 16 bit dual cpu provides powerful editing functions for deletion, insertion and replacement. 5. The program copy function, in conjunction with the edit and modification function, provides easy program editing and modification. 6. 60 sets standard programs combined with 40 sets edit meets requirements for any type of mold. 7. Machine interface contains: mold clamp interlock, injection interlock, mold eject interlock, safety door control, product counting and cycle time. 8. Specially designed outside mold hold function suits extra high molds and molds with core cylinders. This prevents molds bumping against the robot. 9. Middle platen confirmation device (optional): a safety guard to prevent the middle platen bumping against the robot resulting from incorrect positioning of middle platen.
Extruder Screw barrel:38crrm nitriding Gear-box:hard-toothed cover Vacuum venting device:vacuum degree:0.08mpa Forecd feeding system motor power:1.1kw Electric machine: low pressure electric machine:simenz; Temperature control: omron, intelligence module control Scerw diameter:80/156 alloy Screw rotary speed:1-36.9rpm. Main moter power:55kw, frequency control Frequency adjuster: fuji Barrel heating power: 36kw cast aluminum heating ring; Stainless steel out shell, air-cool constant temperature 11.Capacity:>400kg/h Size:5500*1500*2400 Weight:5000kg Pe film
Clamping force: 1280kn Injection weight: 143~206g Space between tie bars: 410*370mm Machine dimension (l‡óh):4.34*1.29*1.86 Machine weight:3.3t
Machine controlled with servo driver, servo motor. Clamping force:8800kn Injection weight: 2603 ~ 3543g Space between tie bars: 1100*1100mm Machine dimension (l‡óh):13.6*2.65*3.4m Machine weight: 56.5t
Pet bottle recycling line The process is used to recycle big capacity and stable quality raw material, especially for psf manufacturer and recycled poy manufacturer with big capacity. The process flowchart as below: De-baling----- label scrapping------ label separation------- bottle pre-washing--------manual sorting and metal detecting-----wet grinding-------gravity separation-------chemical washing for pet flakes-------rinsing--------drying--------packing. Specification: Power : ~380 kw Capacity : 3 mt/hour input Area requirement: 1000m2. Flakes quality criteria: Size: 1 mm ~ 12 mm Humidity: 1.5 % Pe, pp: 20 ppm Paper, wood: 20 ppm Glues/hot melts: 20 ppm Organics: 20 ppm Inorganic particles: 20 ppm Ferrous and non-ferrous metals: 20 ppm Pvc: 30 ppm. Our pre-washing process can make pvc become distinguishable. But the efficiency of labors in bottle sorting unit is important. Colored pet flake: should be less than 20 ppm. But it should depend on efficiency of bottle sorting labors. Seaworthy packing
Plastic crusher 1 it can smash any plastic material rapidly and can be applied on several usages. Ití»s a smasher with full power. 2 the big plastic materials can be smashed directly without blocking which will result in the stopping of smash. So it can save a lot of time. 3 with water cooling system and the clearance between cutters provide facilities of heat dissipation in order to reduce damage effect between bearings and machine bodies and lessen the depreciation of steel characteristics. Specification: Power : 75kw Capacity :maximum 1600kgs/hour at 12mm hole in the screen Dimension: l1800 x w1500x h2400 mm. Seaworthy packing
1.Nsk-250a is accurately controlled and operated by computer:smooth to operate and easy To maintain. 2.Independent hydraulic system;precise pressure, efficient operation, high productivity & top Quality. 3.A very capable clamping mould and high clamping mould pressure combine to produce a Product without any burr. 4.Steel close-mould seat, will never deform. 5.Stable rotating disc controlled by hydraulic transfer system, locate exactly, without noise. 6.The hydraulic pressure of clamping-mold has segmental speed control, efficient operation & high productivity will never damage the mold. 7.Screw rotation with hydraulic motor, feeds smoothly, speedy & noiseless. And the feeding Screw special design helps to increase production. 8.Hydraulic injection system : injects quantity accurately & efficiently, helps to increase Production. 9.The machine is very easy to operate & maintain-even by unskilled workers. 10.Auto feeding system controlled by computer : feeds the material precisely & easy to adjust. 11.Auto computer scout system for disc's rotation : locate accurately & without displacement. 12.The machine is suitable for p.V.C., t.P.R., p.V.C. Foaming t.P.U. And n.B.R. Material. 13.This machine has cooling system which can bring the good mould cooling results.
Item nsk-285 unit Screw rod diameter ø70 mm Ejective capacity 600 cm³/shot Screw revolution 0-100 r.P.M. Motor of spiral oil pressure 275 kg-m Motor of oil-pressure pump 6p x25hp kw/pole Mould clamping force 50 ton Mould clamping space(max.) 185 mm Size of mould available (max.) 180 x 400 mm Mould clamping frame 20 station Electric heating capacity(glue) 8 kw Acting oil capacity 550 l Machine size 3700 x 2500 x 1750 mm Machine weight 5.9 ton Gross weight 6.4 ton Packing dimension 4000 x 2040 2150 mm Negotiable
1.Nsk-250a is accurately controlled and operated by computer:smooth to operate and easy To maintain. 2.Independent hydraulic system;precise pressure, efficient operation, high productivity & top Quality. 3.A very capable clamping mould and high clamping mould pressure combine to produce a Product without any burr. 4.Steel close-mould seat, will never deform. 5.Stable rotating disc controlled by hydraulic transfer system, locate exactly, without noise. 6.The hydraulic pressure of clamping-mold has segmental speed control, efficient operation & high productivity will never damage the mold. 7.Screw rotation with hydraulic motor, feeds smoothly, speedy & noiseless. And the feeding Screw special design helps to increase production. 8.Hydraulic injection system : injects quantity accurately & efficiently, helps to increase Production. 9.The machine is very easy to operate & maintain-even by unskilled workers. 10.Auto feeding system controlled by computer : feeds the material precisely & easy to adjust. 11.Auto computer scout system for disc's rotation : locate accurately & without displacement. 12.The machine is suitable for p.V.C., t.P.R., p.V.C. Foaming t.P.U. And n.B.R. Material. 13.This machine has cooling system which can bring the good mould cooling results. Negotiable
1.Nsk-213(4stations or 6 stations) for single manual operation have high mobility and efficient Suited for few order, sample, testing mould. 2.The unique design of producing have good cooling system to use materials of foaming and no Foaming , when using foaming material let production not change color, not change quality expand The best foaming effect. 3.It is suitable for p.V.C. Foaming, t.P.R., solid p.U. & n.B.R. 4.Photoelectric digit control system with 3 patents divides quantity of materials into four steps to Control ejection quantity respectively and precisely. 5.The disc is computer operated to protect the system well especially to the moulds. 6.Movement of disc is hydraulic control with hydraulic brakes , enabling a stability in the movement And accuracy in positioning. 7.Special hydraulic design with speedy , low electric cost drive by 20hp motor. 8.Hydraulic closed mould system with powerful mould locking and would not create fiber trims and Peermeation of colors. 9.Efficient cooling system have good effect of cooling and stable quantity. 10.Cooperate with auto turn last system, auto clamping system easy to operation and high Capacity. Negotiable
The molds of the former vertical injection molding machine for rain boots was liable to wear down.The quality of rain boots was not good,and the machine was not easy to operate.Therefore,we imported the latest technique to develop the "Auto rotary injection molding machine for rain boots".The molds of NSK-375 can open and close automatically,which can save manpower and make it easy to operate the machine.With the "Wind pressure auto molding system",the operators can easily remove finished products from the molds without damaging the lasts so that the molds can last longer. The NSK-375 adopts direct-pressure injection which generates high pressure.It can produce boots of different sizes at the same time.The high clamping pressure ensures the quality of products.The machine can produce boots of different sizes or heights simultaneously,which reduces production time.Furthermore,the machine also can produce sandals by changing the molds. Product Character 1.The NSK-375 is the first machine with the photo-cell digital locating system in Taiwan. It is easy to accurately adjust the ejection quantity. 2.The machine is specially designed for producing rain boots. It is automatic, economical,efficient, and easy to operate. 3.The machine is run by a hydraulic system. The machine can adjust clamping pressure and can work at high speed. 4.The NSK-375 has eight(8)molds; freely select their usage; molds can be opened and closed manually or automatically. 5.Besides the 16"(45mm) rain boots, it can also produce pumps, slippers, and sandals. 6.With the "Wind pressure auto mold-opening device", the operators can remove the finished products from the molds without damaging the lasts. The molds can therefore last longer. 7.Two options for ejection quantity are available: a fixed quantity or full mold. 8.Powerful mold clamping prevents burrs. 9.Many different sizes of rain boots can be produced at the same time. Also sandals and rain boots can be produced simultaneously. 10.The machine is suitable for P.V.C.,T.P.R.,and N.B.R...etc. Negotiable
Sandwich panel forming line is specialized machine of new type building material, it main function is compounding color steel on thick, lighter core material eps panel or rock wool panel. Sandwich panel is one new type building material, ideal decorate material, lightweigt, high intensity, good appearance, convenience construct, short period of construction, and have heat preservation, waterproof and so on kinds of nature.Suitable for bulk storage plant, industral factory building, large-span roofing, frige, clean room, air conditioning equipment room and temporary shelters.Our sandwich panel forming line can produce six different panel. Max width: 1200mm Max thickness: 25cm Working speed: 0¡«3.8M/min Power: 34.1kw Weight: 15¡«16t.
