Features: Forged brass body with Steel Lever Handle Machined chrome plated brass ball Suitable pressure: up to 400 psi working temperature: -10â?¤tâ?¤120 suitable for: water, Oil, Gas Female/female threaded ends
The metallurgical gate valve is installed on the combustion air, gas, cold air and flue gas pipes of the hot blast stove system, cutting off the medium. In general, the gate works only in the full open or full off state and is not suitable for use as an adjustment or throttle. Suitable for combustion air, gas, cold air and flue gas piping in blast furnace hot blast furnace system Wedge block is arranged on both sides of valve body to realize forced sealing Cemented carbide sealing surface
The blast furnace hot air valve is arranged at the hot air outlet of the hot blast furnace. Open the hot air valve during the hot blast furnace supply period, and the hot air is sent to the hot air main through the hot air branch pipe. During the braised furnace and combustion of the hot blast furnace, the hot air valve is closed and the medium is cut off. Suitable for pipes with medium temperature below 1450 in blast furnace hot blast furnace system, which can be used as hot blast valve, backflow stop air valve, preheating furnace hot air cut off valve, etc. New products with independent intellectual property rights, with the characteristics of water saving, energy saving and longevity. Driving mode: hydraulic drive, electric drive Valve water cooled, lined with heat protection, insulation material. Shall be opened and closed under the condition of uniform pressure
DIN3352-F4/EN1171 PN25 OD40-300 BOLTED BONNET REPLACEABLE O-RING RUBBER ENCAPSULATED WEDGE BRASS WEDGE NUT FBE BLUE COATED INSIDE AND OUTSIDE
It is used to measure the thickness of various rubber materials, test pieces and products.
Pneumatic V Port Titanium ball valve Titanium ball valve Ball valve Manual Valve titanium valve, Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.
Titanium ball valve Ball valve Manual Valve titanium valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.
3 Way Titanium ball valve Titanium ball valve Ball valve Manual Valve 3 way ball valve, Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.
Metal seated Titanium ball valve Titanium ball valve Ball valve Manual Valve metal seat ball valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.
NAB C95800 gate valve Gate valve Manual Valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
904L gate valve Super austenitic gate valve Gate valve Manual Valve 904L valve, 904L valves for phosphoric acid Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator
Alloy 20 gate valve Super austenitic gate valve Gate valve Manual Valve Alloy valve manufacturer, alloy 20 valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
Monel butterfly valve Monel butterfly valve Butterfly valve Manual Valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief
Pneumatic Nickel plug valve Control plug valve Rotary motion control valve Control valve Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~600LB, 1.0MPa~11.0MPa, JIS10K~40K Size range: NPS1/2-16, DN15~DN400 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Full bore or Reduce bore Fixed structure Double gland structure Fire safe design, Anti-static device Packing box design Anti-erosion adjustable structure
Pneumatic 904L Ball valve Control ball valve Rotary motion control valve Control valve 904L valves for phosphoric acid, 904L valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator
Titanium pneumatic discharge valve Discharge control valve Special control valve Control valve Titanium control valves Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB,HG Connection type: Flange, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~40K Size range: NPS1/2-12, DN15~DN300 Design Feature: Open upward / Open downward Double stem structure Crystal proof Blow-out proof stem
Hastelloy pneumatic discharge valve Discharge control valve Special control valve Control valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB,HG Connection type: Flange, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~40K Size range: NPS1/2-12, DN15~DN300 Design Feature: Open upward / Open downward Double stem structure Crystal proof Blow-out proof stem
Trunnion Titanium ball valve Titanium ball valve Ball valve Manual Valve trunnion ball valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.
Titanium gate valve Gate valve Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, Lug Pressure range: 150LB, 1.0MPa~25.0MPa Size range: NPS3/8-40, DN10~DN1000 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Titanium knife gate valve is designed specifically for reliable in difficult services in pulp and paper mill, petrochemical industries, mining ect. application. This type valve is with optional seats and can be specially designed with electric, pneumatic actuation based on the local control, which facilitates automatically operation. 1. Designed with wafer type structure, shorter face to face dimension, small volume,light weight. It is convenient for installation, carriage, storage and piping layout. Its cost-effective valve. 2. Packing seal use Japan DAKIN PTFE.. 3. The knife shape gate can easily cut off materials, fibers and sundries, preventing clogging and easy for closure and open. 4. Replaceable seat make sure easy for repairing. 5. Designed with straight type, small flow resistivity and more safe application. 6. Handwheel with anti-corrosive plastic coating, which obtains good look and convenient for handle 7. The complete round port area provides maximum flow capacity and minimum head loss. 8. Operation: Hand wheel, Gear, Pneumatic, Hydraulic, Electric actuator
Nickel gate valve Gate valve Manual Valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
