Titanium Pneumatic Discharge Valve

Hastelloy pneumatic discharge valve Discharge control valve Special control valve Control valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB,HG Connection type: Flange, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~40K Size range: NPS1/2-12, DN15~DN300 Design Feature: Open upward / Open downward Double stem structure Crystal proof Blow-out proof stem

Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate

Pneumatic V Port Titanium ball valve Titanium ball valve Ball valve Manual Valve titanium valve, Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief          Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.

Discharge Valve Discharge valves are mainly used for discharging material from the bottom of storage tanks, reactors and other vessels. The valve is connected to the equipment and is located at the bottom by flanging or butt-welding to eliminate the residual phenomenon of process media usually at the outlet of the vessel. According to the needs of the actual situation, it is divided into upward display type and downward display type. The upward type is used for kettle discharge with a stirring discharge valve; the downward type is used for kettle discharge from frame-anchored stirrers. Structure characteristics Integrated body structure Increased inlet flange, no dead corner , no liquid hydrops. Stem incline with a angle to prevent interference with reactor bottom, elongated connection structure, ensure operational space Anti blow-out stem Spring loaded seat seal construction (metal seal) Non-metallic seat , temperature resistance of 230. Design reference standard ASME B 16.34 API 608 ISO 5211 Seat leakage standard API598 Applicable range DN: DN15 -DN300 PN: PN6-PN50 Operation temperature -60C -+450C

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option