Heat shrinkable tubing
Cable coupling tube
Heat shrinkable tubing Nornal Heat Shrinkable Tube Thin Wall Heat Shrinkable Tube Halogen Free Flame-retardant(Envioment Free) Halogen Free Heat Thin Wall Shrinkable Tube Non Flamer Heat Shrinkable Tube Daul Wall Heat Shrinkable Tube Yellow / Green Heat Shrinkable Tube Silicone Rubber-Insulated Tube High termperature PTFE tube Heat Shrinkable Insulated Belt
WOER Flame-retardant Heat Shrinkable Tube has properties of insulation,low recovery temperature,rapid shrinking and flexibility.It is suitable to the prevention of overheating for temperature sensitive components
Yellow & green heat shrinkable tube Colors : yellow/green
PTFE (Teflon) tube
Item value Shrinking temperature start at 80oc Operating temperature -55ocf¼125oc Elongation strength fª200% Tensile strength fª10.4mpa Volume resistance ·+1014¬+/cm Dielectric trength fª15 kv/mm
MoSi2 tube Molybdenum disilicide (mosi2) heating element is a resistance generate-heating component made from mosi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light sio2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800f¦ during oxidizing atmosphere. According to your request, our company can produce the products of pole, "u", "w" and "u"-right angle shapes Mosi2 heating element can usually make use of furnace temperature from 1300f¦ to 1800f¦. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature Wooden box
Heat shrink tube kosso k-2(3x) Shrinkage ratio: 3:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties Resistance to abrasion and fluids Operating temperature range Operating temperature range: -55p+G-ªG+GG¦fP+T-ª+GG¦ß~135p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum shrink temperature: 70p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum full recovery temperature: 110p+G-ªG+GG¦fP+T-ª+GG¦ß Packed in roll
Heat shrink tubing kosoo k2 Features/Benefits Shrinkage ratio: 2:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties, for highly reliable, general purpose tubing Good abrasion and solvent resistance Complied with EN71 Part 3, EN1122, EPA3050B, EPA3052 European environmental standards Wide range of sizes and colors PACKED IN ROLL
Kosoo k-2 (gys) heat shrink tube Application KOSOO K-2 (GYS) is one of the KOSOO K-2 series of heat shrinkable tubing. It is a co-extruded, green and yellow striped, heat shrinkable tubing designed for use in earth sleeving. Features/Benefits Shrinkage ratio: 3:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties, for highly reliable, general purpose tubing Operating Temperature Range Operating temperature range: -55+óGÇP¦Æ~135+óGÇP¦Æ Minimum shrink temperature: 70+óGÇP¦Æ PACKED IN ROLLS
Kosoo k-2 (z) heat shrink tube Features/benefits Shrinkage ratio: 2:1 Flexible, high flame retardance Low shrink temperature Good thermal stability Excellent physical, chemical and electrical properties Complied with en71 part 3, en1122, epa3050b, epa3052 european environmental standards Free of pcbs, pcps, pbbs, pbbos, pbbes, pbdes, which are classified as environmentally hazardous substances, conform to european rohs environmental standards Operating temperature range Operating temperature range: -55póGÇPµÆ~135póGÇPµÆ Minimum shrink temperature: 70póGÇPµÆ Minimum full recovery temperature: 110póGÇPµÆ Packed in rolls
Kosoo nh heat shrink tube Features/Benefits Shrinkage ratio: 2:1 Low smoke Free of added halogens Low evolution of acid gases Operating Temperature Range Operating temperature range: -45+óGÇP¦Æ~105+óGÇP¦Æ Minimum shrink temperature: 80+óGÇP¦Æ Minimum full recovery temperature: 120+óGÇP¦Æ PACKED IN ROLLS
Butyl rubber inner tube
The continuous busbar protection heat shrinkable sleeve is made of environmental friendly polyclinic heat shrinkable material which is bombarded by high energy electron beam. It is suitable for the corrosion protection and insulation protection of bus and electrical equipment. The electric insulation, mechanical protection, phase spacing reduction, joint box application field: electric industry. Product features shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV bus bar) shrinkage temperature: 84 ~ 125 operating temperature: - 40 ~ 125 environmental protection, high strength, good elasticity, flame retardant and soft color standard: iron red, yellow, green, black
The continuous busbar heat shrinkable sleeve is made of environmental friendly polyolefin heat shrinkable material cross-linked by high-energy electron beam bombardment. It is suitable for anti-corrosion and insulation protection of busbar and electrical equipment, electrical insulation, mechanical protection, reducing phase spacing and making joint box. Application field: electric power industry. Product features shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV busbar) Shrinkage temperature: 84 125 Working temperature: - 40 ~ 125 Environmental protection, high strength, good elasticity, flame retardant and soft
The continuous busbar heat shrinkable sleeve is made of environmental friendly polyolefin heat shrinkable material cross-linked by high-energy electron beam bombardment. It is suitable for anti-corrosion and insulation protection of busbar and electrical equipment, electrical insulation, mechanical protection, reducing phase spacing and making joint box. Application field: electric power industry. Product features shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV busbar) Shrinkage temperature: 84 125 Working temperature: - 40 ~ 125 Â Environmental protection, high strength, good elasticity, flame retardant and soft Color standard: iron red, yellow, green and black
The heat shrinkable tube of diesel resistant elastomer is made by radiation modification of polymer elastomer. It can be used at high temperature for a long time. It is resistant to diesel, aviation fuel and high temperature fluid. It can be used for the protection of military vehicles, high-speed rail cars, ship equipment or commercial cable terminals, separation joints, etc Product features diesel resistant Long term high and low temperature resistance flame retardant shrinkage temperature: 90 Final shrinkage temperature: 150 Service temperature: - 75 150 Heat shrinkable ratio: 2:1
It is used for insulation and mechanical protection in oil and high temperature environment. It is used in electronics, communication, automobile, shipping, aircraft manufacturing and other industries. It is used for protection of welding points, terminals and connecting lines against high temperature, industrial fuel, solvents and chemical reagents. Product features Shrinkage ratio: 2:1 Minimum complete shrinkage temperature 175 Applicable temperature range: - 55 ~ 175 Soft, transparent, flame retardant, resistant to most oil and chemicals, abrasion and cutting resistance Standard color: transparent
It is mainly used for insulation and sealing protection of cable branch, with 2.3.4.5.6-core finger sleeve, excellent shrinkage and no cracking. Standard colors: black, red, white.
