Sizes= 12MM,19MM,25MM Lenght= 7,10,12mtr 2400PC per box 3000PC per box
1.Material: pvc film 2.Thickness: 0.10mm-0.2mm 3.Width:18mm, 19mm 3.Flame retardant or non flame retardant 1.Each roll wrapped with transparent plastic film 2.10 rolls/ shrinl 3.500/ 250/ 200 rolls a carton 4.Paper label of your brand can be used.
95% clear and 5% coloured film. Weight per container: ca.(20-24)mt, packed in bales.
1.This film specially used the polymer water-based adhesive of usa which has no corrosion And any chemical reaction for low-e glass film, with high weather ability, no adhesive residue left after tearing off, to ensure the cleanness and brightness of glass surface. 2. The max width is 2500mm, can fully stick 2440mm plain low-e glass, edges do not tilt And no spalling, can fully meet the needs of customers. Remark: max width 2500mm, other specifications can be made according to users. Material: pe Color: clear Thickness: 0.05mm Width: 2500mm Length: 1000m Viscosity: low viscosity Applicability: plain low-e glass
The film has less static electricity, and a whitish color, and doesn't result in surface precipitations while producing the thermal film. Since primer agents are unnecessary, the problem of drying out solvents is resolved, making it more environmentally friendly. Consumption is decreased because the oven is not required. These aspects speed up the production line by more than 30%. GLOSSY/ 12 microns/ no EVA
The film has less static electricity, and a whitish color, and doesn't result in surface precipitation. Since it is produced from the no primer base film, the glue addition step is not needed, the problem of solvents drying out is resolved, and so is the need for ozone treatment. This evolution in the world of lamination film production speeds up the process by more than 30%ï¼? eliminates the fire hazard caused by solvent storage, and preserves the worker's and consumers' health, making the product more environmentally friendly. Since this film production does not require the over, the consumption is also decreased. MATTE/ from 15 to 25 microns/ with EVA
The film has less static electricity, and a whitish color, and doesn't result in surface precipitation. Since it is produced from the no primer base film, the glue addition step is not needed, the problem of solvents drying out is resolved, and so is the need for ozone treatment. This evolution in the world of lamination film production speeds up the process by more than 30%ï¼? eliminates the fire hazard caused by solvent storage, and preserves the worker's and consumers' health, making the product more environmentally friendly. Since this film production does not require the over, the consumption is also decreased. GLOSSY/ transparent/ from 15 to 25 microns/ with EVA
Special delicate velvet, leather touch feeling. Suitable for UV local glazing, hot and cold bronzing, UV color printing, jet printing, etc. It has excellent color and luster. The tone does not fade after application, and the black, red, or dark color versions are more vibrant and gentle. base film/ (no EVA)/ 18-19 microns
Special delicate velvet, leather touch feeling. Suitable for UV local glazing, hot and cold bronzing, UV color printing, jet printing, etc. It has excellent color and luster. The tone does not fade after application, and the black, red, or dark color versions are more vibrant and gentle. pre-coated (with EVA)/ from 24 to 29 microns
This functional film is suitable for functional film production related to paper lamination. Gives the surfaces of packages, newspapers, covers, and more, a super anti-scratch effect to increase the quality and aesthetics of the product. GLOSSY/ base type (no EVA)/ 18-19 microns.
Bopp film for heat pressure paper lamination with a double anti-fingerprint and soft touch function, to give the laminated product, packaging, magazine, cover, and any other product a final effect that enhances the colors and raises the quality perception. PRE-COATED TYPE (with EVA)/ from 24 to 29 microns
Bopp film for heat pressure paper lamination with a double anti-fingerprint and soft touch function, to give the laminated product, packaging, magazine, cover, and any other product a final effect that enhances the colors and raises the quality perception. BASE TYPE (no EVA)/ 18-19 microns
Usage: paper lamination industry Characteristic: This kind of film could be peeled and transfer velvet feeling from film to paper so that film could be recycled and paper could be decomposed.
The product adopts a three-layer extrusion step-by-step stretching process. The structure is comprised of three layers: an anti-static support layer at the center, an anti-adhesion layer at the top, and an antibacterial layer at the bottom. It has stable antibacterial properties, low haze, and a high gloss effect. lt is used for pre-coating to ensure the high-grade appearance of coated products. Excellent optical performance, low haze, high gloss. Good thermal dimensional stability. GLOSSY/12 microns
Specification: Size: Customized MOQ: 100 boxes Material: PLA Color: White Usage: Study cards, photos, business cards, picture books, books, menus, etc. Features: Improve the texture of printed matter, isolate air and moisture, and avoid yellowing
Specification: Size: Customized MOQ: 5000 rolls Material: PLA Color: White Usage: Used in various food and clothing packaging industries, adhesive tape industries, and electronic and electrical industries. Features: Colorless, odorless, tasteless, non-toxic, and has high tensile strength
Thickness (mic) 5~9 Infomation Detail Purpose And Futures -Using for production TV, illumination, computer, monitor, washer, air conditioner, refrigerator, ect. -Excellent consistency of thickness. -Excellent electric property to increase the capaitor properties. PROPERTIES ITEMS STANDARD kgf/mm2 Thickness (%): ±3 Tensile Strength MD / TD (N/mm2): 15.5 / 31 Tensile Elongation MD / TD (%): 170 / 65 Roughness MD / TD (): 0.10 / 0.09 Electric strength (V/): 565 Dielectric Loss Factor (ppm): 120 Dielectric Constant: 2.25 Specific Volume Ressistance (Cm): 40x10 Heat Shrinkage MD / TD (%): 2.8 / 0.0 C.O.F: 1.0 Haze (%): 2.5
Leading a new future of the capacitor film industry with cutting-edge technology and know-how. Capacitor film is a core material for capacitors and inverters for stable power supply of eco-friendly vehicles such as HEV, PHEV, BEV, and FCEV, inverters used in solar and wind power, which are eco-friendly energy sources, and capacitors used in general household appliances. It is the only manufacturer in Korea and ranks third in global market share. Due to global warming, the production of internal combustion engines is scheduled to be stopped due to carbon emission restrictions in countries around the world, the increase in demand for ultra-thin capacitor films and the increase in demand for eco-friendly energy inverters due to the transition to eco-friendly vehicles, untact according to Covid 19 Due to the increase in the number of capacitors for general home appliances and the recovery of the global economy due to the reduction of external life due to the increase of culture and the increase of indoor life, the current state of the capacitor film market continues to pour in orders from capacitor companies in Asia and Europe. We are responding to domestic and overseas orders by producing the maximum of our production capacity. We will lead the future high value-added industry by producing ultra-thin films for BOPP capacitors used in next-generation eco-friendly vehicles. Capacitor film 2.3 used for eco-friendly vehicles is being developed and tested for quality. Currently, the standard time has been exceeded and continuous testing is in progress. After the test is completed, we plan to conduct an eco-friendly vehicle application test. Facility investment is underway to install one additional production line with the goal of producing ultra-thin capacitor films in the second quarter of 2023, when eco-friendly cars are in full bloom. When the facility is completed, competitiveness such as quality, price competitiveness, and productivity will increase, and it will emerge as a strong competitor in the global market monopolized by Japan. Types of electric vehicles Hybrid Electric Vehicles (HEVs) hybrid car Plug-in Hybrid Electric Vehicles (PHEVs) plug-in hybrid car
Machine type and hand type 17-30 microns 100%-300% stretch
First class transparent 17 and 23 micron industrial pallet and machine stretches can be manufactured according to your needs.
