Series lrh slurry pumps are cantilevered, horizontal, centrifugal with double casings. They are designed for the handling of highly abrasive, high-density slurries. Structure: the wet parts of this pump are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt packing gland seal, expeller seal and mechanical seal. Application: series lrh slurry pump mainly applies in the metallurgy, mining, coal washery, power plant, building material and other industries. This pump can be installed in multistage series.
Introduction: Series lmhh slurry pumps are cantilevered, horizontal and centrifugal. The main feature of this series is to transport the slurry for high pressure. Because of its high speed, only metal lined pump could meet the design requirements and the rubber not. Structure: the wet parts of lmhh pump are made of wear-resistant alloy. The shaft seals for series lmhh may be packing seal and expeller seal. The discharge side can be oriented to any of the eight positions to suit installations and applications. Application: they are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps could be also installed in multistage series for long delivery Packing: plywood case
Introduction: As the sump pump, series lm(r)s pumps are of single casing and made of wear-resistant metal and natural rubber. The wear parts are made of high chromium for series lms and are rubber lined for series lrs. According to liquid level of the slurry pool, the vertical slurry pump transmission shaft and suction pipe could be chosen for different length. This sump pump could operate under the best condition with different speeds. Application: The vertical slurry pumps are designed to transport the abrasive, large particle and high-density slurries and applied over the fields such as metallurgy, mining, chemistry, coal washery, power plant, building materials and environmental protection.
Detailed product description Model: 350qzb-1600qzb, 1000-1400qhb Power: 5.5-1500 kw Discharge: 116 -10689 l/s Head: 1.1-16.44 m (3.6- 54 feet) Pump outlet diameter: 350-1400mm (13.7-55.1 inch) Dia. Of impeller: 267-1540mm (10.5-60.6 inch) Rotate speed: 485-1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6-9 Operating limits: Maximum ambient temperature 50¡ãc Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50-60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: #45 steel Application: * applied to farm irrigation and drainage, and water supply and drainage for industrial and mine enterprise, dock, civil project and power station, etc. Advantages: In wooden box
Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
Detailed product description Model: qjx series Flow rate: 80-600 m3/h (22.2-166.7l/s) Head: 20 to 210 m (65.6 to 688.9 feet) Max. Rotate speed: 3000 r/min Pump outlet dia.: 360mm, 450mm, 505mm Ph value: 6.5-8.5 Operating limits: 1, maximum ambient temperature: 20 deg c 2, maximum immerging depth for the first stage: 500mm (19.7 inch) 3, maximum hydrogen sulfide component: 1.5mg/l 4, maximum chloride ion: 400mg/l. Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 220kw Materials: cast iron, stainless steel Application: * applied to getting water from the river and lake, water supply and drainage for mine, the foundation and In wooden box or as your request.
Noise level at 7 meters (dba) 75 Diesel engine engine 178f Diesel engine type air cooled, 4 stroke, single cylinder Power output (hp) 6 Other n.W/g.W(kg) 48/50
Treadle pump.
Qj submersible deep well pumps, submersible pumps, multistage submersible pump Product description: Qj submersible pump is directly connected with motor, which applies to groundwater extraction from deep wells. It can also be used in rivers, reservoirs, canals and other water projects. The pump is mainly used for irrigation and the mountain plateau drinking water and also for the cities, factories, railways, mines, construction sites for drainage and water supply. Main features: 1.Motor, pump are put into operation in the water, so the safety and reliability are ensured. 2. There is no special requirement for the materials of the tube and pipe. Web:www.Zlby.Net/ Packed in standard wooden case
Appearance: colorless transparent Liquid viscosity at 25ºc: 32~40 Diopter at 25 ºc: 1.05 min. Specific gravity: 1.050~1.080 Flash point, ºc:210 min. Condensation point, ºc: -35 max. Ultimate vacuum, pa: 3.99*10-7 max. Saturated vapor pressure, pa: 6.65*10-8 max. 200kg iron drum, 25kg or 50kg plastic drum, 950kg ibc drum.
Appearance:colorless transparent liquid Viscosity at 25ºc, mm² per s: 165 Diopter at 25 ºc: 1.09 min. Specific gravity: 1.090~1.100 Flash point, ºc: 243 min. Condensation point, ºc: -14~-18 max. Ultimate vacuum, pa: 6.6*150-7 max. Saturated vapor pressure, pa: 6.65*10-8 max 200kg iron drum, 25kg or 50kg plastic drum, 950kg ibc drum.
power tiller water pump engine Iron frame+carton/plywood case
Fluid End Expendable Pump Parts 1)Precision machined to API standards 2) Material: Alloy steel&carbon steel Regular package or as consumer's request
Product List: Products Name Model 1. Medical Enteral Feeding Pump JYB-500 2. Medical Enteral Feeding Pump with Barcode Scanner JYB-500S 3. Medical Fluid Warmer JFW-500 4. Medical Infusion Pump JSB-1200 5. Medical Infusion Pump with Drug Library JSB-1200Y 6. Medical Single Syringe Pump JZB-1800 7. Medical Double Channel Syringe Pump JZB-1800D 8. Medical Stackable Syringe Pump JZB-1800C 9. Medical Syringe Pump with Drug Library JZB-1800Y 10. Medical TCI Syringe Pump JZB-2000TCI 11. Medical Syringe Pump with SpO2 & Heart Rate Monitoring JZB-2000H In carton
Technical specifications ParameterSpecification Flow rate:1 -500ml/h (1ml/h increments) Target infused volume:0~9999ml (0.1ml increment) Infused volume:0~9999ml (0.1ml increment) Accuracy:Flow rate +/-10% according to the clinical setting Alarms:Infusion finish, no fluid detected, low battery, operation error Power source:Ac power supply: ac 100 -240v +/-10% Built-in lithium battery: rechargeable. 11.1v, 2000mah, Approximately 5 hours of continuous operation on a new and fully charged battery at 25ml/h Power consumption:
Product List: Products NameModel 1. Medical Enteral Feeding PumpJYB-500 2. Medical Enteral Feeding Pump with Barcode ScannerJYB-500S 3. Medical Fluid WarmerJFW-500 4. Medical Infusion PumpJSB-1200 5. Medical Infusion Pump with Drug LibraryJSB-1200Y 6. Medical Single Syringe PumpJZB-1800 7. Medical Double Channel Syringe PumpJZB-1800D 8. Medical Stackable Syringe PumpJZB-1800C 9. Medical Syringe Pump with Drug LibraryJZB-1800Y 10. Medical TCI Syringe PumpJZB-2000TCI 11. Medical Syringe Pump with SpO2 & Heart Rate MonitoringJZB-2000H In carton
Specifications Top quolity diesel water irrigation pump 1.high suction head 3.stainless steel, cast iron impeller 4.sewage pump pass 76mm 1.Beautiful shape and fine structure,reliable performance. 2.With strong capacity of delf priming, no need to equip with flap valve. 3.Non-clog, and with powerful capacity of passing big solid.. 4.The hole can make sure that stronger sewage can be cleaned quickly when pump is jammed. 5.The unique lubrication oil mechanical seal cavity makes the performance more reliable. 6.Special check valve structure can make the pump working quickly. 7. When working, the gas and liquid works together . 8. Low rotary speed,reliable operation,long time usage, easy to maintenance. 9.Advanced pressure protector make pump the pump work safe. 1.Inlet/Outlet 2''(50mm), 3''(75mm), 4''(100mm), 6''(150mm), 8''(200mm), 10''(250mm), 12''(300mm) 2.Impeller Diameter 158.74mm-457.2mm 3.Rotary Speed 550RPM-2150 RPM 4.Flow Rates 8m3/h-1275m3/h 20GPM-5500GPM 5.Head 6m-63m 6.Horsepower 1HP-125HP 7.N.W 92KG-998KG 8.G.W 114KG-1066KG 9.Solid Passing 20.63mm-76.2mm 10.Material Cast Iron, ADI, CD4MCU, 316 SS, Alloy 20, C276. 11.Diesel Driving Water cooled or air cooled 12.Method of Connection Self-priming pumps are available as basic units or may be flex-coupled, V-belt driven or engine mounted. 13.Drive Variation Cummins, Deutz, Ricardo, Perkins or Chinese Diesel, Electric Motor 14.Skid Mounted on Trailer 2 or 4 wheels Trailer/Trailor,Cart 15.Package Exporting plywood case 16.Certification CE , ISO9001:2000 Standard export wooden
Kelly is driving section of whole drill stem. Kelly is available with square kelly and hexagonal Kelly. H-40 J55 V55 X-52
The corrosion-resistant magnetic pumps The corrosion-resistant magnetic pumps of the fc series are driven by high performance magnetic coupling axes, without Any leakage. The liquid-transmission part is made of the invention patent alloy of our companyahigh strength corrosion- Resistant mh series alloy material, stainless or non-metallic material. It has excellent corrosion-resistant performance, a spe -cial design and silent running. It is applied in chemical industry, petroleum, metallurgy, spinning industry, chemical fertilizer, medicine industry, print circuit-board, electroplate, aluminum material oxidation coloration and so on. It can transmit various Kinds of alkali, acid, salt, organic acid and organic solution that are between c20and 200and without granule (for example, various strength of nitric acid, vitriol, hydrochloric acid, hydrofluoric acid, caustic alkali, chlorate and fluorate). It is especially suitable for the flammable, easy-explosive, volatile, virulent and precious liquid situation.
The corrosion-resistant magnetic pumps of the fc series are driven by high performance magnetic coupling axes, without Any leakage. The liquid-transmission part is made of the invention patent alloy of our companyahigh strength corrosion- Resistant mh series alloy material, stainless or non-metallic material. It has excellent corrosion-resistant performance, a special design and silent running. It is applied in chemical industry, petroleum, metallurgy, spinning industry, chemical fertilizer, medicine industry, print circuit-board, electroplate, aluminum material oxidation coloration and so on. It can transmit various Kinds of alkali, acid, salt, organic acid and organic solution that are between and and without granule (for example, various strength of nitric acid, vitriol, hydrochloric acid, hydrofluoric acid, caustic alkali, chlorate and fluorate). It is especially suitable for the flammable, easy-explosive, volatile, virulent and precious liquid situation.
