Static Max temperature:1200 Working temperature:800 Power:6KW Heating element: A resistance wire Costing thermocouple and temperature range:Type K (0-1200) Cost controller: Automatically adjusts the temperature between 30 slots The temperature increases at a rate of 0 to 20 C/ min (Recommended =< 10.C) Temperature control accuracy: 1 Sino Furnace material :Alumina ceramic fiber Monolayer structure:Double shell with cooling fan at the bottom
1.Induction heating melting furnace use crucible high temperature to heat metal.then can melt,refine,casting,etc production. 2.Can melt platinum, rhodium and palladium,gold,silver,copper,steel,aluminium, Activated carbon, gold dust sands, electrolysis mud, gold and silver powder, tin ash tin slag etc. 3.Induction heating melting furnace can melt weight from 0.001KG--500KG per time.melting time from 5-40 minutes. max temperature will be 1500C--2000C. 4.Induction heating melting furnace have fixed type,push out type,auto pouring type,furnace up down moving type.
1. Gold melting equipment are mainly used for the melting of steel, stainless steel, copper, brass, silver, gold ,glass and aluminium materials, etc. Melting capacity can be from 1KG to 5KG. 2. Easy to install and operate. No need make foundation or any civil work. 3. Super small size and portable, occupies not enough 1.0 square meters. 4. 24 hours no-stop melting ability. 5. Energy saving and environmental protection. 6. It's easy to change furnace to melt different materials. 7. Using crucible: No need skilled person for making lining by refractory material as the normal by induction furnace 8. With digital display of working frequency, current, voltage, power.
A head of Size 22,35,50,78 would be completed attaching an assembly
The glass tempering furnace is used to manufacture flat and bending tempered glass for furniture, car, architecture glass, etc.
Lead Smelting Rotary Furnace Lead smelting rotary furnace is widely used for the Lead paste smelting of Battery recycling plants all over the world. SM Industry have rich experience in providing complete system according to customer requirements, which includes: rotary furnace and filters. The rotary furnace is consist of furnace body, driving system, burner hole, off-gas holefilters. Equipment name:� Lead smelting rotary furnace Capacity:� 1~20Tons/batch Application:� Lead acid battery recyclers, Lead ore smelter, Secondary Lead smelters Raw material:� Lead paste from used battery, Lead ore, Lead dross, Lead slag, crude Lead, and other Lead containing materials Product: 98% purity crude lead Fuel: natural gas, heavy oil, petroleum coke Brick: Mg-Cr brick Burner: pyronics burner Motor and reducer: China famous brand motors and reducers Related equipment: battery crushing and separation system, Lead kettles, ingot casting machine, Lead ladles Advantages 1.Good adaptability. It can be used for the roasting and smelting for many type of materials, its capacity can tolerate 50-100% of changes. Comparing with reverberatory furnace, it has higher production energy rate and lower fuel consumption. 2.Small length-diameter ratio, small temperature difference, quick heat transferring, and uniform smelting temperature in the furnace. 3.High heat efficiency and good seal performance. 4.Furnace can rotate, which make the firebricks has a longer life service. 5.Good operation environment with high mechanization level and low labor intensity. 6.The rotating speed can be adjusted according to process requirements. 7.Fuel can be diesel, natural gas, gas, powdered coal, heavy oil, and so on. The gas after heat exchanger will enter surface cooler and then dust bag collector. We can provide customized service for you, you are warmly welcome to visit us!
Wall-hung Boilers Gas Boilers Central Heating Wall-mounted Condensing Boilers Various Brands, Models, Sizes from Stock for Export Description: As a very strong stockist in Turkey, our company offers wall-hung gas boilers (wall-mounted boilers for central heating systems, condensing boilers) with wide range of brands, models, types, and sizes to our domestic and worldwide customers, at very competitive prices and with fast delivery options directly from our large stock for export. Your very small orders are also welcome. Please contact us now to get fast reply. We offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing equipment, plastic materials (plastic pipes and fittings), industrial boilers, expansion tanks, valve groups, heat exchangers, pump groups (circulation pumps, centrifuge pumps, dreinage pumps, heat pumps...)
We manufacture Bus bars, Induction heating coils for any design (any make m/c) and application prove out for Hardening, Billet(forging), Heating, Brazing, Soldering, Annealing,softening, Jig-Fixtures,quench rings etc and Ferrotron cores (Fluxtrol make)
Furnace, Retort, Radiant tube, Aluminium Braids, Electrical Panels, Casting, Fixture
according to different minerals, different furnaces can be designed here: nickel iron furnace, manganese furnace, copper melting furnace, chrome ore furnace, Magnetite furnace etc., including inlet system, feeding system, roof system, front slagging and tapping system, gas system, power system, cast iron machine, hot blast furnace, thermal instrumentation system. Our furnaces have advantages of high yield, low coke rate, no nodulation, and easy operation. With the top advanced technology, every procedure is the optimal scheme after repeated screening, which makes things more reasonable.
1. Enamel air pre-heater designed for denitration renovation projects 2. Enamel air pre-heater for circulating fluidized bed boiler and pulverized coal boiler 3. Enameled air pre-heater for garbage incinerators and biomass boilers 4. Enameled air preheater for grate furnaces, like chain grate furnaces 5. Enameled air preheater for gas-fueled boilers, such as kerosene boilers, coke ovens, etc.
What is Blast Furnace Gas Blast furnace gas is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value, about 93 BTU/cubic foot, because it consists of about 60 percent nitrogen and 18-20% carbon dioxide, which are not flammable. The rest is mostly carbon monoxide, which has a fairly low heating value already and some (2-4%) hydrogen. It is commonly used as a fuel within the steel works, but it can be used in boilers and power plants equipped to burn it. It may be combined with natural gas or coke oven gas before combustion or a flame support with richer gas or oil is provided to sustain combustion. Particulate matter is removed so that it can be burned more cleanly. Blast furnace gas is generally used to as the raw materials of steam - gas-fired combined cycle power generation. Blast furnace gas fired boiler designed and manufactured in ZG Boiler is suitable for iron, steel, and it is also the best choice of the nation to sustainable development and green economy. Blast Furnace Gas Fired Boiler Structure 1. Using "� " Type Arrangement With whole structure "� " type arrangement, the blast furnace or coke oven gas fired boiler adopts front suspending back supporting, plumbing systems, superheater and other suspended from the roof on the boiler, economizer, air preheater, etc. are arranged at the rear steel shelves, air preheater can be pulled out from the back, which are easy to maintain. 2. Square Chamber Design The furnace is design as square, and the burner is arranged in the corners, using the four corners of the vortex burner ignition, also has a higher temperature of the hot air, combustion gas required to ensure that the temperature field and the aerodynamic conditions not only to ensure adequate fuel gas combustion, but also to prevent the fuel gas and air mixture within the burner. 3. Multiple Security Devices In addition to conventional protection device, the boiler is also equipped with automatic ignition device, flame monitoring device, flame protection device and supply device which automatically cut off the gas when the gas pressure is lower than a certain value and other safety devices
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc.
Function 1. Reduce the hardness of steel pipes, improve the plasticity, to facilitate cutting machining and cold deformation. 2. Fine grains and homogeneous steel organization and composition, to improve the performance of steel, also to make preparation for the heat treatment. 3. Remove the residual internal stress in steel, to prevent deformation and cracking. Feature 1. No need pre-heating. Comparing traditional black annealing furnace, it only takes 10-15 minutes to reach the exact temperature. 2. No need re-straightening. Using� rotary tube delivering structure, there is only tiny deformation after heat treatment. 3. Automatic uploading tubes, with strict docking of front and rear tube's end. 4. Fully automatic running, saving labor cost. Large diameter welded pipe black annealing machine is a special machine for heating the steel pipe to solution temperature and then cool it to room temperature. This machine adopts the advanced induction heating power supply, the new type DSP+IGBT power supply. It uses IGBT inverter, DSP precision control, air-cooling structure( water cooling for induction coil), reduce the loss of system. It has perfect self-protection and self diagnostic function, saves 15% energy comparing with the similar product. It is the first machine that could annealing such large stainless steel welding pipes.
Process Flow Continious type stainless steel pipe bright annealing furnace can heat the stainless steel welded pipeto 1050 C then cool it to the temperature lower than 100 C under the protection of hydrogen.The heating power supply of the intermediate ferquency induction is the newest DSP+IGBT structure.With DSP digital control system,there are self protection and self diagnostic functions.With small volume,it heats pipes rapidly and efficiently with energy-saving and low-waste features.The especially developed inducer designed according to the features of stainless steel can save 15%-20% energy in contrast of other products of the same class.Using hydrongen as of gas every minute. 1.Power system a.Medium frequency power that inverter by IGBT transistor b.Slot compensation power 2.Movable bright annealing section and cooling tunnel c.Induction heating section d.Heat preservation section e.Cooling water tunnel f.Gas protection device g.Infrared thermometer h.Gas pressure detector i.Circulating-outside water colling system 3.Electrical control system
This machine is suitable for all kinds of agricultural and forestry biomass charring making. For example, wood shavings, sawdust, wood chip, rice husk, cotton stalk, crop straw, bean curd, etc Principle First, the biomass material is ignited in the gasifier. The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).As the early stage of the carbonization of heat source, through the early warming of the carbonized, to feed the material when the heat reaches the special temperature. The combustible gas that carbonation process of flue gas by spraying, cooling, purification process into the burned secondary. According to this method of circulation, sufficient to achieve a self-sufficient, then achieve the effect of energy-saving. The flue gas through purification, to reach the environment production and flue gas emissions-free. Which is reached to the standards of waste gas emptying.
Minimum Order Quantity: 1 Unit Melting Material: Silver Type Of Furnace: Induction Voltage : 220-380 V Melting Time : 30-35 mins Power: 10 KW to 100 KW Capacity: Available in 5 Kg,10 kg,15 kg,60 kg Warranty: 1 Year Duty Cycle : 100% Frequency : 50 - 60 Hz Some other important and useful qualities include: Power conversion efficiency Fast on/off switch time Less current and voltage stress on power devices A constant output of power despite input power fluctuations Reliable, easy to maintain and service Compact in size easy to install and simple to operate Additional Information: Production Capacity: 20
Product Details: Melting Time: 15-20 minutes Voltage: 220-380 V Melting Material: Copper Power: 10 KW to 5000 KW Brand: Foster Surface Treatment: Color Coated Phase : Three Phase Body Material: Mild Steel Warranty: 1 Year Duty Cycle: 100% Frequency: 50 - 60 Hz Capacity: Available in 5 Kg,10 kg,15 kg,200 kg,10 ton Here are some of the reasons why induction furnaces ideal for melting of copper: Power Regimes: Induction melting furnaces tend to be more flexible when it comes to alloying. These furnaces can be easily shut off any time the plant or factory closes, and relining is fairly quick and simple. They also tend to be more economical in terms of energy consumption, and they usually have a longer refractory lifetime. In the Induction furnace melting rate is very fast and large quantity of the metal can melt very quickly. Reliability: When it comes to melting copper, a copper furnace based on induction is far more reliable than most others. Due to latest IGBT technology and standard built up the maintenance of furnace is almost nil, manufacturers can get the most out of this type of furnace without the need for any repairs. Cleanliness: It''s well known that induction furnaces emit far less pollutants than other types of furnaces. Not only does this mean that you are protecting your employees from breathing in harmful substances, but having a clean atmosphere will also prevent any additional oxidation of the copper. Energy Efficiency: A recent study noted that today''s modern induction furnaces can achieve higher electrical efficiency levels. That means less of a negative impact on the environment, and it means you won''t be wasting more on energy costs.
Product Details: Melting Material: Brass Voltage: 220-380 V Melting Time : 30-60 mins Brand: Foster Rated temperature: 1200 degree Celsius Power: 10 KW to 5000 KW Capacity: Available in 5 Kg,10 kg,15 kg,200 kg,10 ton Warranty: 1 Year Frequency: 50 - 60 Hz Features: Easy to operate Long service life Low maintenance Other Details: High efficiency Maximum melt rate Top quality and long life Innovative design Optimal productivity
Lower density metals like aluminium require evenly distributed heat for melting, and the heat must be maintained at a precise temperature. Induction type aluminium melting furnace, utilizing an alternating current coil (electromagnetic induction) to melt the aluminium. Water is used as a coolant for the system. In an induction melting furnace the action of the electromagnetic field actually stirs the aluminium as it melts, allowing the aluminium to maintain its integrity. The aluminium melting furnace is clean (non-polluting), energy-efficient, easy to control and can melt aluminium quickly. Induction furnaces in general are far less expensive to the operating and maintenance budgets, as well. Product Details: Minimum Order Quantity :1 Unit Rated Power (KW) :10 KW to 80 KW Melting Time :30-60 mins Automation Grade :Semi-Automatic Rated temperature :1200 degree Celsius Capacity :Available in 5 Kg,10 kg,15 kg,100kg Warranty :1 Year Brand :Foster
