Product Introduction 40 Micron Stainless Steel Sintered Wire Mesh Filter Element is a type of filter that is made by sintering multiple layers of stainless steel wire mesh together. Sintering is a process that involves compacting and heating a material without melting it, which causes the particles to fuse together and form a solid mass. 40 Micron Stainless Steel Sintered Wire Mesh Filter Element consists of multiple layers of wire mesh that are stacked and then sintered together. The sintering process creates a solid bond between the wires, resulting in a robust and durable filter element that can withstand high temperatures, pressures, and corrosive environments. Parameter Material: stainless steel Grade:SS 316L, SS 304L, SS 316, SS 304 OD: Max. 200mm Length: Max. 1500mm Accuracy / Pore Size: 0.2um-200um Porosity: 30%-60% Temperature resistance: â?¤300â?? Technique: Sintering Process Surface: Smooth, clean and metallic Feature 40 Micron Stainless Steel Sintered Wire Mesh Filter Element has several advantages over other types of filters. First, it has a uniform and controlled pore size, which ensures consistent filtration performance. Second, it has a high dirt-holding capacity, which means that it can capture a large amount of contaminants before needing to be cleaned or replaced. Third, it has excellent mechanical strength, allowing it to withstand high pressures and mechanical stresses. Fourthly, it can be cleaned and reused, making them a cost-effective and environmentally friendly filtration solution.
40 Micron Stainless Steel Sintered Wire Mesh Filter Element is a type of filter that is made by sintering multiple layers of stainless steel wire mesh together. Sintering is a process that involves compacting and heating a material without melting it, which causes the particles to fuse together and form a solid mass. Parameter Material:stainless steel Grade:SS 316L, SS 304L, SS 316, SS 304 OD: Max. 200mm Length: Max. 1500mm Accuracy / Pore Size: 0.2um-200um Porosity: 30%-60% Temperature resistance: â?¤300â?? Technique: Sintering Process Surface: Smooth, clean and metallic The function of each layer in the five-layer stainless steel wire mesh sintered filter element: Outer Protective Layer: The outermost layer of the filter element is usually a coarse mesh that serves as a pre-filter to capture larger particles and prevent them from clogging the finer inner layers. This layer also protects the finer inner layers from damage. Intermediate Protective Layer: The second layer is also a coarse mesh that provides additional protection to the finer inner layers. This layer helps to prevent the filter element from being damaged by high-pressure or high-velocity fluid flows. Inner Filter Layer: The third layer is composed of a finer mesh size and serves as the primary filter layer. This layer is responsible for capturing smaller particles that were not captured by the outer protective layers. Reinforcing Layer: The fourth layer is a coarser mesh size than the inner filter layer and serves as a reinforcing layer. It provides mechanical support to the inner filter layer and helps to prevent it from collapsing under high-pressure or high-velocity fluid flows. Inner Protective Layer: The fifth and final layer is the finest mesh size layer that provides additional protection to the inner filter layer. This layer captures the smallest particles and prevents them from passing through the filter element. Feature 40 Micron Stainless Steel Sintered Wire Mesh Filter Element has several advantages over other types of filters. First, it has a uniform and controlled pore size, which ensures consistent filtration performance. Second, it has a high dirt-holding capacity, which means that it can capture a large amount of contaminants before needing to be cleaned or replaced. Third, it has excellent mechanical strength, allowing it to withstand high pressures and mechanical stresses. Fourthly, it can be cleaned and reused, making them a cost-effective and environmentally friendly filtration solution. Application 1.Chemical Processing 2.Oil and Gas Industry 3.Food and Beverage Processing 4.Pharmaceuticals 5.Water Treatment
Product Introduction Multi-layer sintered metal mesh filters combine the advantages of woven wire mesh, with micron-level pore sizes and a diffusion-bonded wire mesh laminated plate, to provide mechanical strength and stability. Typically, fine woven metal wire mesh filters are placed within multiple layers of sintered laminated plates to protect the fine mesh from mechanical damage caused by environmental pressure. 5-layer sintered laminated plates are commonly used for sintered wire mesh filters. Due to their stability, mechanical strength, and durability, multi-layer sintered metal mesh filters can be made into various sintered filter elements, such as cylinders, filter cartridges, candles, and discs. TOPTITECH provides customized sintered wire mesh filters to meet your specific requirements. We are committed to providing customers with high-quality filtration solutions, ensuring stability and efficiency in various applications. Parameters Material: SUS334L SUS316L layers: single layer, 2 to 3 layers, 5 layers, and 6 layers or customized Sheet sizeï¼?18" �? 48" 24" �? 48" customized Application Oil and gas production Drug Chemical industry Food Aerospace Polymer filtration Energy and Nuclear Power
Product Introduction TOPTITECHs 20'' titanium metal porous water treatment filter tube is based on pure titanium powder(Purity 99.7% or higher) as the primary raw material, through high heating sintering. The uniform structure, small pore density is high, filtration resistance, and good permeability; Also, it has high filtration precision, acid & alkali corrosion, and high temperature resistant characteristics. It can be used for solid liquid, gas separation, and purification. The service performance is excellent, but the suction filter and press filter, it will not form secondary pollution, it simple operation, and it can be online regeneration, easy to clean, and has a long service life. Brand Name TOPTITECH Product Material: Titanium powder Filtration grade: 0.22um-100um Operating Temperature: 300() Use: Gas-liquid Filtration Pressure: 0.6 Mpa Scope Of Application: Filter Housing Specification: 5, 10, 20, 30, 40 Interface Form: 226; 222; Both Ends Are Flat; M20 Thread; One End Is Flat, Etc. Performance: Acid Resistance, Alkali Resistance, Low Temperature Resistance, High Temperature Resistance Features This filter has a sophisticated design with a uniform structure, high porosity, low filtration resistance, and good permeability. Its humanized design ensures it has a strong affinity to the human body and will not cause harm. This makes operations with the filter more assured. The filter has great performance with high hardness, strong pressure resistance, high and low-temperature resistance, strong chemical properties, corrosion resistance, and long service life. Additionally, the material is easy to shape, stable in performance, and durable. It can be processed into various shapes based on specific requirements.
Product Introduction 40 microns stainless steel wire mesh filter pipe is a unique material ideal for purification and filtration. It is made by permanently bonding multiple layers of woven wire mesh panels using heat and pressure through a sintering process, which fuses individual wires and adjacent layers of mesh. This creates a material with exceptional mechanical properties, and it can have 5, 6, or 7 layers of wire mesh. Parameter Brand: TOPTITECH Material: SUS 304 SUS 304L SUS 316 SUS 316L Other alloys available as required Layer: 1-5 or as required Micron size: 1-300 um Technique: Sintering Wall Thickness: 10-50mm or as required Length: 10-1200mm Diameter: 10 - 80mm Porosity: 35% -60% Features 1. Increased stability: Because of the sintering process�´ increased stability, mesh with a higher proportion of open sections or that needs a secure pore size is a great candidate. 2. Superior strength: Sintered wire cloth�´s intrinsic strength allows for high-pressure backwashing and good resistance to tears and punctures. 3. Reusability: Diffusion metal wire cloth may be used repeatedly without diminishing quality or performance because it is so tough and simple to clean. 4. Simple to make: Sintered wire cloth is quite simple to make. For applications requiring regulated permeability, it can be shaped into a depth filter medium. 5. Flexibility: Diffusion bonded wire cloth is a versatile material that may be used to combine different layers of square plain weave wire mesh to provide a variety of filtration and flow qualities. Different type According to the number of layers, sintered mesh laminate can be divided into two series: single layer sintered mesh laminate and multiple layers sintered mesh laminate. Multiple Layer Sintered Mesh Laminate Multiple layer sintered mesh laminate, with layers ranging from two to more than 25, offers improved mechanical qualities for filters and applications involving harsh environments. One-layer wire mesh is not structurally rigid and is readily damaged when used for filtering, separation, and sifting. A deep filter media may tolerate a high pressure drop by adding to one or more layers sequentially and sintering them. Six-layer sintered mesh is made to add one layer of 12-mesh on top of a sturdy base of five-layer sintered mesh. Six-layer sintered mesh laminate is a three-in-one medical filter plate that may be used for filtering, washing, and drying. It comes in two varieties: split and monolithic construction.
The parallel oil filter element is a reliable and efficient solution for oil filtration, especially in large-flow hydraulic lubrication systems. Its parallel configuration, composed of two or more filter layers, provides several benefits including increased filtration area, high porosity, and strong dirty holding capacity. This design also allows for easy installation and disassembly, making maintenance a breeze. Features Large Filtration Area:� The parallel filter element has a multilayer configuration that significantly increases its filtration area, resulting in more efficient and thorough filtration. Long Service Life:� With its durable construction and layered filtration design, the parallel filter element offers a longer service life, reducing the need for frequent filter replacements. Easy to Assemble and Disassemble:� The parallel filter element is easy to install and disassemble, with several filters connected in parallel from small to large and secured by bolts. Suitable for Various Industries: The parallel filter element is suitable for various industries, including metallurgy, power, chemical, and environmental, and can filter various types of oil and fluids, such as crude oil, lubricating oil, and even wastewater. Applications The parallel oil filter element is a highly versatile filtration solution that can be used in numerous applications across multiple industries. It is ideal for hydraulic and lubrication oil filtration in the metallurgy industry, including steel mills and foundries, as well as in power generation applications such as coal power plants, wind turbines, and hydroelectric power plants. The chemical industry can also benefit from the parallel filter element, as it can be used in the production of chemicals, plastics, and rubber. The parallel filter element is also well-suited for environmental protection applications, including wastewater treatment facilities and other filtration systems. In the food and beverage industry, it can be used for filtration of oils, syrups, and other liquids. The mining industry can also benefit from the parallel filter element's filtration capabilities, particularly for hydraulic and lubrication fluids.
Product Introduction The parallel oil filter element is a reliable and efficient solution for oil filtration, especially in large-flow hydraulic lubrication systems. Its parallel configuration, composed of two or more filter layers, provides several benefits including increased filtration area, high porosity, and strong dirty holding capacity. This design also allows for easy installation and disassembly, making maintenance a breeze. Customers can customize the filter element with two to five parallel filters, depending on their specific requirements. This flexibility and scalability make it an ideal choice for various industries including metallurgy, power, chemical, environmental, and more. It can filter various types of oil including crude oil, fuel oil, diesel oil, kerosene, gasoline, lubricating oil, hydraulic oil, machine oil, and gear oil. Moreover, it can also clarify the filtration of raw water, sewage water, white water, reclaimed water, and more. Products Features Large Filtration Area: The parallel filter element has a multilayer configuration that significantly increases its filtration area, resulting in more efficient and thorough filtration. Long Service Life: With its durable construction and layered filtration design, the parallel filter element offers a longer service life, reducing the need for frequent filter replacements. Easy to Assemble and Disassemble: The parallel filter element is easy to install and disassemble, with several filters connected in parallel from small to large and secured by bolts. Suitable for Various Industries: The parallel filter element is suitable for various industries, including metallurgy, power, chemical, and environmental, and can filter various types of oil and fluids, such as crude oil, lubricating oil, and even wastewater.
Product Introduction The Porous Powder Metal SS 316L Cap-type Filter is a type of metal porous filter that is made from stainless steel 304, 304L, 316, or 316L powder. The filter is produced using a process that involves sizing, molding, and the raw materials. The use of stainless steel in the filter´s construction results in it being referred to as a stainless steel powder filter element. In addition to the cap-type filter, the Porous Powder Metal SS 316L Filter can be manufactured as tube-type and plate-type filters. These filters are extensively used in several industries, such as medical, chemical, and metallurgical industries, as well as in gas purification applications. This is due to their excellent permeability, filter fitness, and high stock utilization. The filter´s good permeability allows for the smooth flow of fluids or gases through it, while its filter fitness ensures that it can effectively remove contaminants and impurities from the fluid or gas passing through it. The filter´s high stock utilization results in it being able to operate for an extended period before needing replacement, making it cost-effective for industrial applications. Parameter Material: SS 316L Type: cap-type Filter Size: can be produced according to your drawings and requirements Filter accuracy: 5-100micron Density: from 5.5 to 6.5 Feature 1. Create a self-supporting structure that is suitable for extreme forces. 2. Especially beneficial characteristics when subjected to compression, vibration, changing circumstances, or with strong abrupt pressure peaks. 3. High thermal stability and resilience to heat. 4. Defined permeability and filtering qualities because of the precise and uniform pore size and distribution. 5. Backflushing and simple cleaning using ultrasonic or superheated steam. 6. You can weld and manufacture a range of metal materials. Application 1. Gas and liquid filtration 2. Solid catalyst recovery 3. Filtration of slurry oil and other petrochemical products 4. High-temperature gas filtration 5. Fluidization 6. Powder conveying 7. Sparging and other applications in various industrial fields
Product Introduction The parallel oil filter element consists of multiple filters connected in parallel, with a small size, large filtration area, easy disassembly and assembly, and convenient cleaning. Suitable for large-flow hydraulic lubrication systems. Used for oil suction filtration, removing solid particles and colloidal substances in the working medium, and effectively controlling pollution. Installed below the liquid level of the fuel tank, using stainless steel or copper mesh filter material that can be cleaned and reused. Features: 1. Multi-layer composite filter paper has high accuracy; 2. Large dirt holding capacity and long service life; 3. High flow density, reducing the size of fine filters; 4. Complete specifications and varieties to meet various fine filter needs. Parallel filter technical parameters: Material: SUS304 Working medium: mineral oil, emulsion, water-glycol, phosphate ester hydraulic fluid Working temperature: -25â??--110â?? Accuracy: 5-400�¼m Flow: 150-5000L/min Size: Manufactured according to user needs
The parallel oil filter element consists of multiple filters connected in parallel, with a small size, large filtration area, easy disassembly and assembly, and convenient cleaning. Suitable for large-flow hydraulic lubrication systems. Used for oil suction filtration, removing solid particles and colloidal substances in the working medium, and effectively controlling pollution. Installed below the liquid level of the fuel tank, using stainless steel or copper mesh filter material that can be cleaned and reused. Features: 1.Multi-layer composite filter paper has high accuracy; 2.Large dirt holding capacity and long service life; 3.High flow density, reducing the size of fine filters; 4.Complete specifications and varieties to meet various fine filter needs. Parallel filter technical parameters: Material: SUS304 Working medium: mineral oil, emulsion, water-glycol, phosphate ester hydraulic fluid Working temperature Accuracy: 5-400 low: 150-5000L/min Size: Manufactured according to user needs Application field 1. Metallurgy: Filters hydraulic systems in rolling mills, continuous casting machines, and lubrication equipment. 2. Petrochemical: Separates and recovers products, intermediate products during oil refining and chemical production. Filters particles from oil field injection well water and natural gas. 3. Textile: Purifies and filters polyester melt during drawing process. Protects air compressors and removes water and grease from compressed gas. 4. Electronics and pharmaceuticals: Filters reverse osmosis water, deionized water, cleaning solution, and glucose. 5. Thermal power and nuclear power: Purifies gas turbine, boiler lubrication system, speed control system, bypass control system oil, feed water pump, fan, and dust removal system. 6. Mechanical processing equipment: Purifies lubrication systems in papermaking, mining, injection molding, and precision machinery. Filters compressed air, recovers dust, and purifies tobacco processing and spraying equipment. 7. Automotive: Filters engine and transmission oil, fuel, and air intake. 8. Food and beverage: Filters raw materials, clarifies juice and wine, removes impurities from cooking oil, and filters production water. 9. Agriculture: Filters irrigation water, pesticides, fertilizers, and liquid fertilizers. 10. Water treatment: Filters and purifies drinking water, wastewater, and swimming pool water.
Product Introduction Polished stainless steel powder filter elements are manufactured using high-quality stainless steel powder that has been processed using advanced technology. These filters have a uniform structure with high porosity and pore diameter ranging from 0.2 m to 100 m, and porosity between 35% to 60%. Polished stainless steel powder filter elements are available in various shapes and sizes, including cylindrical and disc-shaped. The cylindrical filter elements have a diameter ranging from 10mm to 1000mm, while the disc-shaped filter elements have a diameter ranging from 5mm to 300mm. The filter elements generate uniform filtration and have low resistance, which reduces energy consumption. Products Parameters Material: S304/SS316L Outer diameter: 5 300mm Length: 10 1000mm (more than 1000mm can be welded) Filtration accuracy: 0.2um 100um Surface treatment Polished Inlet/outlet connection Screw thread, flange Features durability, corrosion resistance, and high-temperature tolerance can be cleaned and reused multiple times Additionally, the polishing process helps create a smoother surface, improving the filter´s efficiency and reducing the risk of clogging. Compatibility: Polish stainless steel filters are compatible with various liquids and gases, including corrosive and high-temperature fluids. They are also resistant to many chemicals, making them suitable for use in harsh environments.
Product Introduction The Stainless steel sintered muffler is a device that uses the sound absorption and scattering effects of sintered metal materials to reduce noise. It is usually sintered by a large number of metal powders to form a porous structure with excellent sound absorption properties. metal mufflers are widely used in machinery, fans, air compressors, gas turbines, generators, combustion chambers, smoke exhaust systems, vehicle exhaust pipes, ship cabins, and other fields. It can effectively absorb high-frequency noise, low-frequency noise, and pulsating noise, reduce noise, improve the working environment, and protect personnel health. The Stainless steel muffler has the advantages of corrosion resistance, high temperature resistance, wear resistance, easy cleaning, etc., and can work stably for a long time. At the same time, due to the characteristics of its porous structure, the metal muffler also has a certain resistance, which can produce a certain damping effect on the flow of gas or liquid, thereby achieving the effect of flow control. Parameter Thread specification screw thread: M12 1.5 Outer diameter: Outside diameter OD (mm)14 Inside diameter: ID (mm)11 Overall length: OL (mm)38.5 Material: stainless steel316 + 304 Operating temperature: below 600 C Filtration accuracy: 30-40um Processing technology: machining + sintering process Applications Flow-Control Mufflers High-Noise-Reducing Mufflers Flame-Resistant Mufflers
Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; Â 4.) Pharmacy; Â 5.) Chemical industry; 6.) Polymer filtration; Â 7.) Refine; Â 8.) Energy & nuclear. Process Description Through a number of technological procedures, sintered wire mesh is created. To achieve adequate contact at wire mesh intersections, precision woven wire mesh is evenly calendered.Then, under mechanical pressure in unique fixtures inside a hot furnace, one or more layers of this calendered web are laminated. The furnace is heated to the sintering temperature while being surrounded by a special environment of inert gas.The individual wires and each layer of wire have been bonded together after being carefully cooled, making the mesh solid. Compared to ceramics and sintered metal powder/particles, it has more favorable overall characteristics. Sintered mesh filters are very durable. The filter element, which is simple to maintain and has a long lifespan, can be created without the need for internal assistance.
Product Introduction Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; 4.) Pharmacy; 5.) Chemical industry; 6.) Polymer filtration; 7.) Refine; 8.) Energy & nuclear.
supply LY-48/25W-2 hydraulic filter types Oil Filter Element for Pacitcan TPP material skill is strong, the production of strict accordance with national standards. With the power station forging, mining metallurgy, rolling, cement and spare parts spare parts, metallurgy, rolling and other products improve the production and operation system. For hundreds of water technology change, hydropower, thermal power plant overhaul supply of high-quality equipment selection, equipment commissioning, construction plans, spare parts, after-sales service, such as through-train service. The company to undertake hydropower stations, thermal power plant unit capacity transformation, technical transformation and overhaul projects. Look forward to the major manufacturers to inquire. can offer many spare parts for power plants as below: DF-LY-48/25W-2 hydraulic filter types Oil Filter Element-DF water separator filter SGLQ-600A filter QYL-63 20S Plate type oil filter LY-160 oil filter wrench DE006L01A large flow filter element DP302EA10V/-W filter 0330D010BN3HC filter SKX-160 10 Oil purifier coalesce filter ILX-15-85 cross reference oil filters TZX2.BH-160 20 EH oil outlet filter HCY0108FKP13Z hydraulic filter price HDX-25 20 hydraulic oil filter cartridge DOWDHX250 oil press machine with filter XLY-1-450 machin oil filter element 0950R020BN3HC/-V oil filter CFRX-630 30 air purifier 0508.1411T1201.AW016 lube filter 2-5685-1004-99 oil filter machine HX.BH-40 40 hydraulic oil filter machine HX-10 3Q filter PQX-300 10Q2 oil filter XU-A63 100BS pp spun filter cartridge making machine SWF EH oil pump oil-return filter 40H51C03V automobile filter element DP301EA10/-W pp melt blown filter machine DLS-100 filter replacements YLX-150 410-80A water filter parts SGLQB-1000 Second Filter KRYJ155X700 DFYL-2023-5-16-MY
Screen Filters are made of either Metal or Plastic like HDPE Available from 20 M³/ Hr water discharge to 50 M³/ Hr. Inlet & Out let size are available from 1.5 to 3 Packing in corrugated Box. Minimum order Not Specific. Price Per Unit INR 1800 to 4900 depending on Size
Product Introduction The titanium rod filter element is made of industrial high-purity titanium powder (99.4%). No particle falling off, no secondary pollution of the original solution, in line with food hygiene and pharmaceutical GMP requirements. Good mechanical performance can be press-filtered or suction-filtered, and easy to operate. Low differential pressure, small footprint, and large flow. It can be regenerated online, is easy to clean, and has a long service life (usually several times that of membrane filter elements) Parameters Filtration accuracy: 0.22�¼m-100�¼m Porosity: 28-50% Air permeability: 0.02-20M3cm/m2h.mmH2O Compressive strength: 0.5-1.5Mpa Temperature resistance: 280�°C (wet state) Connection:M20 M30 M36 M42 215 222 226 DOE and customized Maximum working pressure difference: 0.6Mpa All specifications can be customized. Application With its unique performance, titanium rod filter element can be widely used in pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry and gas purification fields. Typical uses include: In the pharmaceutical industry, it is used for decarbonization filtration in the concentrated preparation of large infusions, small injections, eye drops, and oral liquids, and security filtration before terminal filtration in the diluted preparations. Impurity removal and filtration in the production process of raw materials, decarbonization filtration and fine filtration of materials. Security filtration of ultrafiltration, RO and EDI systems in the water treatment industry, filtration after ozone sterilization and ozone aeration. Decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultrafine fine particles and catalysts, precision filtration after resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. High-temperature decarbonization and white clay filtration in the dye industry.
Name : Industry filter Price : Customized according to customer requirements the price is depends on the requirements. Origin : China H.S:8421399090 Packaging : OEM or factory/neutral packing
Name Nylon Mesh Filter Price Customized according to customer requirements the price is depends on the requirements. Origin China Key Specifications/Special Features 1 Rough dust filtration, collecting more than 10m of particulate dust and various large-sized Sundries;? 2 High temperature resistance, acid and alkali resistance, repeatable cleaning, and filtration efficiency are not affected; 3 Long service life and high Cost-effective. Frame:Stainless steel, Galvanized steel Filter material: PPA/nylonï 10-400mesh Panel frame:Plastic,Aluminum,Stainless steel Dimension:L*W*H(Non-standard customization) Efficiency: G1-G3(EN779) Max temperature:
Name Bag Filters Price Customized according to customer requirements the price is depends on the requirements. Origin China Key Specifications/Special Features 1 Large effective filtration area, large dust collecting capacity and long service life; 2 Replaced the filter bag quickly and easily and reduced the cost of running costs greatly; F5 orange : Counting average efficiency 40-60% F5 Green Counting average efficiency 60-80% F7 Pink : Counting average efficiency 80-90% F8 Yellow : Counting average efficiency 90-95% F9 White : Counting average efficiency > 95% Max. working temperature:
