Aqua Fair String-Wound Filter Cartridges Aqua Fair filter cartridges offer true depth filtration with superior filtration technology. Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters. Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal. Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc. The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components. Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance. The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy. Product parameters Material: 316L, 304 Specifications: OD 8- 37mm Length 10-50mm Accuracy: 1-50 m Temperature resistance: 600 Maximum working pressure difference: 0.6Mpa Application Environment Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments Product features 1. Good mechanical properties 2. Stable shape 3. Good air permeability 4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static 5. High temperature resistance 6. Uniform bubbles, wide range of gas dispersion, no clogging Product applications 1. Catalyst recovery 2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam 4. Noise reduction, flame resistance, gas buffer Craftsmanship The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use. Filtration principle A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
The SS sintered mesh filter disc is made of multilayer (usually five layers) 316L or 304L stainless steel wire and is sintered by high-temperature vacuum, argon arc or plasma welding. Adjust the size and distribution of holes by selecting the wire diameter, mesh size, and weaving method of the wire mesh. Sintered wire mesh has excellent filtration precision, filtration resistance, mechanical strength, wear resistance, heat resistance and processability. Product specification Material: SUS316L, SUS304L Size: Length 500-1200mm; Diameter 20-400mm Filtration accuracy: 1~100�¼m The standard five-layer sintered mesh includes: a reinforcement layer, reinforcement layer, separation layer, filter layer, the protection layer Shape: square, round, shaped (customized) Product Features 1. Economical option. 2. Uniform aperture. 3. High temperature & corrosion resistance. 4. Cleanable & reusable. Applications 1) Used as a dispersed cooling material in high-temperature environment 2) Used for gas distribution, air flotation transportation, fluidized bed, gas collection, shock absorption, noise reduction, flame retardant 3) Used as a high-precision, high-reliability filter material 4) For high-pressure backwash oil filter Package 1. The SS sintered mesh filter elements� are usually packed in cartons, wrapped in soft film, and fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags to ensure that the products have no collision, no shaking, and no damage during transportation.
High temp resistant HEPA filter is a kind of air filter that can withstand up to 250 C, even up to 350 for a long time. Commonly, the frame is made of stainless steel, and filter materials adopt fine glass fiber. Especially, aluminium are used as the separators. It cannot be used for high efficiency air filtration, but also can be used under high temperature atmosphere. High temp resistant HEPA filter is especially designed which can be used in a broad range of industries, such as hot air type high temperature ovens in electronic factories, clean room, high temperature production line, spraying industry, ultrasonic industry and other high temperature purification sites. At the same time, the aluminum separator design divides the filter media and creates air flow tunnel. Silicone, a special heat resistant sealant is adopted in high heat HEPA filter for adhesion agent and gaskets, preventing bypass leakages perfectly. Features Ultra-fine glass fibre with alkali-free. High temperature resistance. Aluminum foil for separator, anti-deformation. Low resistance, high efficiency. Silicone as the sealant and gasket material, ensure the filter has a good effect in high temperature condition. The efficiency of dop 0. 3 micron particles over collected is 99. 97%. Specifications High temp HEPA filter's efficiency ranges from F9 to H14 and is based on a deep-pleat construction, high temperature resistance or ultra-fine fiberglass filter paper as the media, high temperature sealant, special aluminum foil as the separator, and specialized folding equipment. Applications Hot air type high temperature ovens Clean room in different area, such as aerospace, electronics, semiconductors, pharmaceuticals, hospitals, etc. High temperature production line High temperature paint spray line High purified baking booth and baking box
Mini-pleated panel HEPA filter is a kind of filters adopts equidistance and flow-friendly design of the pleats, as well as uniform media velocity and a very minimal pressure drop. This implies a very reliable and cost-effective operation along with a quasilaminar outflow. Mini-pleated panel HEPA filter is a type of HEPA filter intended to remove the smallest particles. The filter employs a unique medium designed to absorb both small and large particles while limiting airflow as little as possible. The MINI PLEAT structure is intended to increase the surface area of the filter. In comparison to conventional pleated filters, this filter has an average surface area that is over 5 times larger. Longer filter life and greater filtering capabilities result from the increased surface area. Characteristics Filter media are high-performance micro-glass-fiber papers. Filter Classes E10-H14. Cast airtight joint connecting filter media to frame. High durability, resistance to organic compounds. High efficiency, low resistance, simple installation, superior sealing, compact structure, and cheap running costs. Applications Sophisticated air-conditioning Hospitals' operating rooms and intensive care units, pharmacies, sterile rooms, labs, research facilities, etc. Sensitive industrial processes Microelectronics, pharmaceuticals, biotechnology, chemicals, optics, and food and beverages Outlets and modules in the ceiling for adaptable cleanroom systems.
Product Introduction Filter elements with smooth outer wall types are made from stainless steel powder filter elements through special processing, with a smooth surface and poor ability for impurities to adhere. When the impurities attached to the surface of the filter element reach a certain weight, they will naturally fall off from the outer wall of the filter element, reducing the degree of clogging and thus greatly e tending the cleaning cycle of the filter element. Product parameters Material: SS304 SS304L SS316 SS316L Filtration accuracy: 0.22-100 microns Porosity: 30%-50% Applicable temperature: 450 Shapes: Tubes, plates, sheets, discs, rings, rods, cones and sheets, strips are currently available Product features 1. It has high mechanical strength and can be used in high-pressure working conditions without causing deformation and damage to the filter element components and powder materials. 2. It has good thermal conductivity. Because the metal powder is made of a metal or alloy that has good thermal conductivity, the powder tube also has outstanding heat dissipation performance in high-temperature applications, which lowers the thermal stress on the filter element and lengthens its useful life. 3. It has good sealing performance. Filter element filtration is performed at a specific pressure, hence the necessary filter element needs to operate well when sealed. Product application 1.The concentration-matching link of filtration equipment in the pharmaceutical industry, drying three-in-one filter components, gas filtration and impurity removal, and filter elements for decarbonization and filtration of security filters, etc. 2. Decarbonization filtration, fine material filtering, and impurity elimination in the manufacturing of raw materials and liquid pharmaceuticals in the chemical industry. 3. In the water treatment industry, the ultrafiltration, RO, EDI system's front security filter filters and removes impurities, after ozone sterilization, filters and ozone aeration. Product Packaging and Shipping Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation; Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Clean bench is designed to meet the needs of modern industry, the optoelectronic industry, biopharmaceuticals and scientific research and testing for the cleanliness of local working areas. The air is sucked into the pre-filter through the fan and filtered through the static pressure box into the high efficiency filter, which sends the filtered air out in a vertical or horizontal airflow, so that the operating area can reach class 100 cleanliness and ensure the production requirements for environmental cleanliness. Principle In a specific space, the indoor air is pre-filtered by the pre-filter, pressed into the static pressure box by a small centrifugal fan, and then filtered by the high-efficiency air filter. The clean air blown from the air outlet of the high-efficiency air filter has Accurate and uniform cross-sectional wind speed can eliminate the original air in the work area and take away dust particles and biological particles to form a sterile and high-clean working environment. Use In factory production, the workload of inoculation is very large, and when it is necessary to work for a long time, the horizontal laminar flow clean bench is an ideal equipment. The advantages of the ultra-clean table are that it is convenient and comfortable to operate, relatively comfortable, high work efficiency, short preparation time, can be operated in more than 10 minutes after starting up, and can basically be used at any time. The service life of the ultra-clean table is related to the cleanliness of the air. In temperate regions, ultra-clean benches can be used in general laboratories. However, in tropical or subtropical areas, due to the high amount of pollen in the atmosphere, or areas with a lot of dust, the ultra-clean table should be used in a better indoor room with double doors. Application Clean bench is a one-way flow air purification equipment that provides a local dust-free and sterile working environment. It is suitable for scientific research and production departments that require a local clean and sterile working environment, such as medicine and health, biopharmaceuticals, food, medical science experiments, optics, electronics, aseptic room experiments, aseptic microbial inspection, plant tissue culture and inoculation.
Automatic Roll Air Filter can avoid human error and wastage as well as maintain filter efficiency throughout operation. AUTOROLL is made of firm metal structure which can operate under harsh environment. It has an intelligent auto filter replacement function which is adaptable to various air flow conditions. Its auto rolling function can effectively lower down power consumption and manpower requirement. Intelligent automatic filter media replacement control system- time/pressure difference indicator system. This is the main part of Auto Roll filter in which the filter replacement is controlled by pressure difference indicator. This can avoid human error and wastage as well as maintain filter efficiency throughout operation. Working principle: Setting up sensors at both the air inlet and outlet filter surfaces. Setting up final pressure drop of filter. When pressure difference exceeds the preset final pressure drop value, the control system will end out signal to start up the motor for filter rolling. The pressure difference value can be set manually. Features: Auto filter media replacement Pressure control system Modular assembly system Firm structure Application place: 1. The primary filter section of the air-conditioning ventilation section. 2. A working environment with high dust particle content and frequent replacement of filter materials. 3. The operating system with unstable air volume. 4. The pre-filtration section of the central air conditioning and ventilation system of the clean room. 5. Ventilation system of ordinary industrial plants.
Product Introduction Stainless steel powder sintered gas filter elements generally include stainless steel powder sintered filter discs, filter plates and filter tubes. The filter piece is made of raw material stainless steel powder (generally SS304 or SS316L) after being pressed and formed, then put into the sintering furnace for high-temperature vacuum sintering. The filter tube is mainly made of stainless steel powder by cold isostatic pressing, and then sintered. made. This type of product has the characteristics of high temperature resistance, high mechanical strength, uniform pore size distribution, good air permeability, cleanable regeneration, corrosion resistance, and is widely used in catalyst recovery, petroleum, chemical industry, medicine, food, beverage, metallurgy and other fields. Gas-liquid filtration and separation; dust removal, sterilization and oil mist removal of various gases and steam; noise reduction, flame retardant, gas buffering, etc. Products parameters Name: Sintered porous stainless steel filter elements for pharmaceutical filtration Material: 304/316L Filtration accuracy: 0.22 micron-100 micron Porosity: 30%-40% Applicable temperature: 600 Products size Stainless steel powder sintered filter: �?20mm-1000mm Stainless steel powder sintered filter tube: �?14mm-80mm, length 20mm-1500mm Products features 1. Stable air permeability and separation efficiency; 2. Excellent mechanical strength; 3. Suitable for high temperature, high pressure and strong acid and alkali corrosive environment; 4. High temperature resistance; 5. Can be welded and machined. Typical application Catalyst filtration and recovery; Filtration of high temperature gas in petrochemical industry; Purification of high temperature flue gas in metallurgical industry;  Recovery of dust in the tail gas of solid fluidized bed;  Purification of dust and tail gas in thermal power generation and nuclear power generation industry; Filtration of liquid products and liquid raw materials in the chemical industry. Product Packaging and Shipping Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation; Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Product Introduction Titanium sintered fiber felt is a new type of porous and breathable material. It is made of titanium wire drawn into a fiber shape, processed by special weaving process, pressurized and then sintered in high temperature vacuum. It has the characteristics of controllable fiber diameter and porosity. Because of its unique three-dimensional network fiber skeleton and fully connected pore structure, it is widely used in filtration and separation, sound absorption and noise reduction, electromagnetic shielding and other fields. Product parameters Product name: Titanium sintered fiber felt for petrochemical waste liquid filtration Raw material: GR1 titanium fiber Size: customized (0.2mm\0.4mm\0.6mm\0.8mm) Shape: custom (polygon, round, ring, disc, etc.) Porosity: 60%-80% Features 1. Anti-corrosion; 2. High specific strength; 3. High temperature resistance; 4. Large porosity; 5. Large surface area, strong dirt holding capacity; 6. Washable and reusable. The main purpose Filtration of various high temperature and corrosive liquids in the field of petrochemical power plants Production Process The titanium wire is drawn to a micron-scale diameter, and the titanium wire is stacked according to a special laying method, then pressurized, and then placed in a high-temperature vacuum environment for sintering, so that the nodes between the fibers are fused, Finally, a three-dimensional three-dimensional network structure is formed.
Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms. 1. The filtration efficiency of 0.3 micron particles is above 99.99%. 2. The housing of Ceiling Terminal HEPA Filter Modules are made of high-quality galvanized steel plate, anodized aluminum profile or stainless steel sheets, with a fire-proof insulation layer attached to the outside, which is suitable for various ceilings and has wide applicability. 3. It adopts folding chip without partition, and the filter material adopts ultra-fine glass fiber filter paper, which has low resistance and large air volume and takes up less space. 4. The structure is compact, the investment cost is low, the installation and maintenance are simple and convenient, and environmental protection, and low cost; the filter screen can be replaced, and it does not need to be replaced together with the box, which reduces costs and saves resources. 5. It can be customized according to customer requirements, and each filter module is strictly tested. Standard Parameters Unit material: Anodized aluminum Media: Ultra fine glass fiber/Glass fiber or PP Separator: Hot melt adhesive Std.EN1822:2009: E11/E12/H13/H14/U15/U16 Efficiency: 95% / 99.97% / 99.99% / 99.999% at 0.3m .99.99995%,99.9995% at 0.12�¼m (DOP/PSL/PAO Counting method) Maximum temperature: 70 Maximum relative humidity: 100% Inlet duct standard diameter: 350mm/300mm/250mm Customized size: Available Applications Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms.
FFU fan filter units can be modularly connected for use, FFU is widely used in clean rooms, clean workstations, clean production lines, assembled clean rooms and partial class 100 applications, etc. Using FFU fan filter units can make simple clean workstations, clean sheds, clean transfer cabinets and clean storage cabinets, etc. It is suitable for obtaining a high level of clean environment in various environments. It provides high quality clean air for clean rooms and micro-environments of different sizes and cleanliness levels. In the new clean room and clean plant type renovation, it can improve the cleanliness level, reduce noise and vibration, also can greatly reduce the cost, easy to install and maintain, is the ideal part of clean environment. A fan filter unit is a combination of a fan and a filter (HEPA or ULPA) to form a self-powered end purification unit. To be precise, it is a self-powered, modular end-supply unit with filtration efficiency. FFU basic structure (1), The box: its material commonly used galvanised aluminium alloy coated steel, aluminium alloy, stainless steel three. The function is to support the fan and the air guide ring, and the second is to support the flow guide. (2), Guide plate: airflow equalisation device, built into the interior of the box, the fan below the surrounding. (3), the fan: there are single AC (AC/1Phase), DC (EC/1Phase), three AC (AC/3Phase) three. (4), Control components: for AC FFU, its commonly used five-speed governor or infinitely variable governor; DC system control chip embedded in the motor internal, with the help of special control software, computer, control gateway and network lines to achieve remote control. (5), Filters. Pre-filter: filtration of large dust particles, non-woven, primary filter, filter frame. High efficiency filter: HEPA/ULPA (High Efficiency/Ultra High Efficiency). Chemical filter (Chemical Filter): in addition to ammonia, boron, organic gases, etc., generally installed in the air inlet, the same as the pre-filter installation method. FFU features 1, FFU purification level: static class 100. 2, FFU air speed is: 0.3/0.35/0.4/0.45/0.5m/s, FFU noise â?¤ 46dB, FFU power supply is 220V, 50Hz. 3, FFU adopts high efficiency filter without partition, FFU filtration efficiency is: 99.99% to ensure purification level. 4, The whole FFU is made of high quality aluminized zinc plate. 5, FFU stepless speed control design, speed control performance is stable, FFU in the state of high efficiency filter final resistance can still ensure the same air volume. 6, FFU uses high efficiency centrifugal fan, with long life, low noise, maintenance-free and low vibration. 7, FFU is especially suitable for assembling into ultra-clean production line, which can be arranged as FFU single unit according to the process needs, or FFU multiple units to form a 100-level assembly line.
Xingtai Kangtao Import and Export Trade Co., Ltd. has stable production capacity and stable product quality. Our products air filter, oil filter, air conditioner filter and fuel filter can be used on various car brands, such as Japanese cars/German cars /American cars. In the past 10 years, we have won the trust and support of various customers. Both wholesalers, retailers and individual buyers have obtained the products they want from us. We also provide customized services for buyers, such as color/process/material/packaging, etc.
ABS Frame V Bank HEPA Filter has large effective filtering area, small resistance, light weight, large capacity and high air volume. ABS Frame V Bank HEPA Filter is a kind of V bank HEPA filter, it has the distinct advantages of high-load, high-efficiency air for constant airflow and variable airflow systems. The filter consists of a number of non-separator filter elements in a V-shaped structure, which is installed in ABS filter box(also you can choose spray-coated galvanized steel sheet). Compared with ordinary filters, this structure greatly increases the amount of filter material. Larger filter media area in existing system installations ensures lower pressure loss, which reduces energy consumption and saves operating costs. Features Rich pore structure; Large specific surface area; Strong adsorption capacity; Great deodorizing effect; Low-pressure drop and high dust holding capacity; Long lifetime; Strong structure and beautiful appearance; Temperature resistance: 100 C; Moisture resistance(relative humidity) 80%RH. Applications Commercial and industrial ventilation, air conditioning system. High humidity ventilation system. Install a tight ventilation system. Electronic technology, medical and health, bio-pharmaceutical, food and beverage, mechanical and electrical engineering equipment, precision instruments, metallurgical chemicals, painting, air conditioning, printing, environmental protection industries, etc.
HEPA Filters with separators is one type of HEPA filter we manufacture, it is know as deep HEPA filter, also known as the separate HEPA filter. They are the HEPA filters that work the best. Double metal mesh grilles protect filter material from damage during transit or installation and can simultaneously provide significant air flow rates and low resistance. To aid in the connection between the filter media and the frame and to prevent leaking, our deep pleat HEPA filters have polyurethane glued completely around the filter frame slot. Characteristics Large filter area High dust holding capacity Durable, and moisture-resistant construction Long service life Multiple choices: single header, double header or no headers Applications Industrial area: pharmaceuticals, hospital, electronic, food-and-beverage, chemical, pharmaceutical, surface treatment technology Advanced air conditioning: laboratories, museums, airports, office buildings, clean room Industries of rotating machinery: engines, gas turbines, and centrifugal compressors
Name:Stainless steel Filter element Cartridge Material:SS304,316,316L Diameter:10-1000mm Length:10-2000mm Filtration Accuracy:1-200um Connector patterns:Flange,Thread,Tri-clamp and customize Lead time:7-10 days MOQ:10pcs
High pressure filter HPU250A-GE-STO-061-1 for North West Power Generation YOYIK is a hi-tech company specializing in the production, development and sale of spare parts for power plant. The company is located in China's heavy-duty base in Sichuan Deyang. The company's product type has sealant, insulating material, filter, power plant, pump, valve, sensor processing parts, bearing and other goods, mainly used in chemical industry, power plant, steel and other areas. Yoyik can offer many spare parts for power plants as below: #DF-High pressure filter HPU250A-GE-STO-061-1-DF Insulation Tape ET100 Overvoltage signal relay PLC-RSC-24DC/21 hydraulic oil filter pump with cart TZX-E400*3Q3 pressure hose SMS-12/15-3048-B line filter element HX-100*1W solenoid valve 4WE10D-20/AG110NZ5L multistage centrifugal pumps KSB65-250B BFP solenoid valve 4WE6J-61B/CG24N9Z5L pressure controller switch 4NN-K5-N4-B1A bulk oil filters HX.BH-100*30 Conductive Groove Liner oem oil filter NX-630*5 EH OIL PRESSURE HIGH HC0622-24 P=2.4bar I=5A AC lube pump impeller nut 125LY-23-4 BFP filter QF6803GA20H1.5C Red Epoxy Modified Coating Varnish 183F differential pressure Regulator 125ZXQ016L13NOERH Filter element SFAX.BH800*3 oil filter wrench ZU-E400*20FS Pump impeller 100LY-215-2 Magnetic Liquid Level Indicator CEL-3581A/GF Grinding roller air breather 20MG40.11.09.01 LVDT displacement sensor TDZ-1E-31 solenoid valve 280251/24VDC generator sealing oil vacuum pump 30WSRP vacuum pump Valve bolt P-537 solenoid valve for carrier humidifier 300AA00309AMCSCH110DG000010 Variable speed hydraulic coupling YOTCGP650 Differential Expansion Contrller HZD-8500B-WY82-A2-B1-C1-D2 solenoid valve refrigeration 165.31.56.04.01 300MW turbine AC lube pump volute 125LY-35-4 Oil filter element HX.BH-100*1W oil transfer electric pump 125LY-35-2 magnetic coupling centrifugal pump DFB80-50-240 Insulating Box Filling Adhesive pp water filter cartridge SGLQB-1000 High pressure filter HPU250A-GE-STO-061-1 oil filter AD1E101-01D03V/-WF Lubricant filter HPU-V100A BFP lube filter YSF-15-11.2A Sealant T2575 Roller Sealing Ring 20MG30.11.09.92 valve J761-003 DFYL-2022-10-27-MY
Single Row Radial Ball Bearing GN215 KLLB C1 Chinese steam turbine parts Our company is equipped with high-precision cutting-edge technology. Our products are mainly used in chemical industry, power plants, steel and other areas. Product types include sealant, insulation materials, filter, power plants, pumps, valves, sensors processing parts, bearings and other commodities. Yoyik can offer many spare parts for power plants as below: #DF-SINGLE ROW RADIAL BALL BEARING GN215 KLLB C1-DF oil filter finder WU-A250*100FS EXTENTION CABLE CWY-DO-812502 Steam Turbine Generator Sealing Grease SWG-1 pressure hose SMS-20-1829mm-C best oil filter TZ-400*1 oil filter house NX-25*1 filter cartridge housing XW-850*40H hydraulic filter breather Q3UI-A400*5FS stainless steel filter cartridge AD3E301-04D03V/-W hydraulic return filter HPU-V150/A Regenerating Circulating Pump Suction Filter WU-100*80J Grease Gun Nipple G.NPL.BH.R1/4 oil filter cartridge 0060D020BN-HC Terylene Fiberglass Strip �?10 DFB Type single stage centrifugal pump CZ65-250A Filter element of oil pump inlet oil pump HFO S150*1120 servo motor valve DJSV-001A Sensor speed turbine CS-1 G-065-06-01 Transmitter CWY 5M Hydraulic Filter SFAX-630*3 Sevomoter Filter element HQ25.10Z Seal blast pipe 20MG20.11.23RG Epoxy Solvent-Free Adhesive J1102 oil filter equipment LH0110D005BN/H double drum filter element FAX (NX)-630*20 sensor CMS-111 0~0.6MPa Accumulator A-40/31.5-L-EH output shaft speed sensor CWY-DO-20T08-B-M10*1-00-05-50 filter pressure hydraulic ZU-H100X20S Titeseal sealing compound 20-75 Manifold for Solenoid Valve 200M-5F oil press filter STZX2-160*3 air filter equipment BDE400N2W1.X/-RV0.003 oil pump replacement 3G60-106 line filter element 0280D005BN3HC BFP Lube Oil Filter YSF13-4.2J SINGLE ROW RADIAL BALL BEARING GN215 KLLB C1 servo valve amplifier ABEX425-1607 STG Jack Oil Outlet filter(Small) HDX-25*40 centrifugal oil filter YQ2U-A250*30S Semiconductor Anti-Corona Varnish 1243 F-class room temperature dried GEAR OIL PUMP KCB-55 Accumulator charge adapter nxq 2-L 63/31.5-h Grinding roller lock ring 20MG50.11.09.91 Medium speed grinding Spiral Shell JX34.10.05.01BG servo valve control 760N1190B DFYL-2022-10-27-MY
Hydraulic Oil Suction Filter WU-100x100-J China replacement supplier Sold by YOYIK. Deyang YOYIK is a professional production, development, sale of power plant dedicated spare parts and accessories processing company. Through more than 21 years of efforts, the majority of customers have been fully recognized. Yoyik can offer many spare parts for power plants as below: #DF-Hydraulic Oil Suction Filter WU-100x100-J-DF Accumulator bladder 25MG43.11.14.01 servo valve controller 0508.963T0101.AW036 solenoid valve CCS230D 16.5W 230VAC filter pressure hydraulic JWU-160*100LYZ lvdt-sensor HTD-250-3 oil filter elements SFAX-40*10 hydraulic filter micron rating ZU-F25*10BSIII hydraulic oil filters XU-A100*50BS Frequency Inverter, 15 kW ACS800-01-0020-3+P901 hydraulic filter and housing ZU-A10*10BS hydropneumatic accumulator NXQA-4/315-L servo valve function BGCD-6121B governer cabinet filter HC8300FKN39H sealing oil differential pressure valve 977HP Stop Check Valve WJ15F2.5P hydraulic oil filter pump with cart TZX-E63*5Q3 pressure hose S110-AC-AL-0063 china cartridge filter GY93.100X*20 Roller core 20MG40.11.09.94J filter cartridge STZX2-160*10 CASE EXPANTION MONITOR DF9032 hydraulic filter testing STZX2-100*1 8mm Eddy Current Sensor PR6423/010-010 bolt induction heater ZJ-20-T12(A) motor servo valve S63JOGA4VPL oil filter cartridge CFF2-520*180 solenoid valve block D1VW020HVZP91XB510 oil filter machine price PQI-H450*3Q3SIII fluid transfer pump 125LY-23 Filter mill LXM-10-60 separation filter FAX (NX)-1000*20 Hydraulic Oil Suction Filter WU-100x100-J oil filter machine DL001002 stainless steel globe throttle check valve (welded) WJ40F1.6-II DN40 Mechanical seal MG60.20.02.01 stator water pump mechanical sealshaft sleeve CZ50-250 gear oil pump DLZB820-R65-8 Filter element of oil pump HFO HX-250*10Q Grinding roller air breather ZGM95G-08-62 outlet filter HBX-40*1 Sealing Compound T25-66 Cartridge valve AM-501-1-0149 110VDC chemical filter cartridge 0950R005BN3HC/-V EH oil test solenoid valve 02-178108 electronic pressure switch 4NN-K5-N4-B1A-X371 piston pump PD060PC02SRS5AC00E1200000 Heavy Sealant Injector 3.463.338 hydraulic filter placement Q3U-H100*3S machine oil filter FBX-63*10 Red Insulating Varnish Thinner 183F Bolt Heating Device ZJ-17-T5 oil filter elements YQ2U-A160*20S hydraulic return oil filter Q2U-A160*10S heater cartridge 220v ZJ-20-57A Plug valve SD61H-P35 50C DFYL-2022-10-27-MY
Customized cylinder titanium filter tube cartridge is a new type of high-efficiency porous filter material made of metal� titanium powder� as the raw material through powder sieving, cold isostatic pressing molding, sintering, mechanical welding processing, etc., because its pores and filtration accuracy can be carried out in a wide range Adjustment is widely used in the fields of self-lubrication, filtration, separation, catalysis, flame extinguishing, heat exchange, thermal electron generation, and gas distribution. Brand: TopTiTech Origin: Baoji, China Material: Titanium Main purpose: used for gas and liquid filtration and gas distribution. Filtration accuracy: 0.2-50�¼m Diameter: 30-80mm Length: 100-1000mm (special specifications can be customized) Filtration principle: Customized cylinder titanium filter tube is a porous titanium metal filter material made by powder metallurgy. Its internal pores are curved and crisscrossed. The pore size distribution is uniform. The filtration mechanism is typical of deep filtration. Performance: This product has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy filter accuracy, and easy regeneration; the titanium filter is formed by titanium powder formed and sintered at high temperature, so the surface particles are not easy to fall off; in the air the use temperature can reach 500-600â??; it is suitable for the filtration of various corrosive media, such as hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia, and iron, copper, sodium, and other chloride solutions; It has excellent mechanical properties, and can be cut, welded, and another machining; high compressive strength, internal pressure damage strength up to 2MPa or more; 7. its filtration accuracy is easy to ensure, even if it works under high temperature and pressure, the pore size will not be deformed; the porosity is up to 35-45, the pore size distribution is uniform, the dirt holding capacity is large; the regeneration method is simple and can be reused after regeneration. Application Liquids or gases filtration in high temperature and pressure; Filtration of liquids or gases containing ozone; Prefiltration and decarbonization in pharmaceuticals industry, as a small injection, oral, etc ; Highly corrosive liquid and gas purification.
