For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22 m and 0.45 m. Three types in filter size:13mm, 25mm and 30mm. Note: Nylon binds protein, do not use when high protein recovery is desired.
We offer a wide range of high pressure filtration solutions to meet with your fluid power transmission system requirements. Hydraulic High Pressure Inline Filters Models : MS450-040 ,063 ,100 ,160 ,250 ,400 Pressure line filters are installed on the hydraulic system line and ensure that the used oil is constantly filtered / cleaned. Return Line Filter Element Filter Element DIN Standard 24550 Models are ; MS010-040, 063, 100, 160, 250 Return filters are located on the return line of the fluid to the tank on the hydraulic systems. It filters the materials formed in the system like dirt, filth, etc. and ensures that the hydraulic fluid in the tank is clean. Usage Areas are ; Industrial Hydraulic Mobile Hydraulic Marine Hydraulic Open-sea Hydraulic Space Hydraulic
Esp, air cleaners, electrostatic precipitators, smoke filter.
Air Compressor, Air Dryer and Moisture Filters.
Air Filter, Cabin filter, Oil Filter, Fuel filter, Pollen Filter, Carbon cabin filter.
Paper machine, filter belt for belt press, filter press and Vaccum belt filter, forming belt, antistatic fabrics for MDF, Corrugator belt.
Filter, filter cartridge, filter bag, filter housing, air filter.
Fuel filter , oil filter, air filter, cabin air filter , gas filter.
Industrial filters, filter, filters, oil filters, air filters, fuel filters, hydraulic filters, filters.
Engine oil, gasoline , air, air-conditioner, and also hydraulic filter and other special filter devices.
Filter systems, filter housings, filtration equipments.
Internal combustion engine filter (oli filter, marine filter, air filter, fuel filter).
Molybdenum Disilicide Heating Elements is used in the furnace temperature from 1300C to 1700C. It is extensively used in the industries of metallurgy glass, ceramic refractory, crystalelectronic device, furnace-manufacture, etc Molybdenum Disilicide Heating Elements Feature 1. High temperature for various electric furnaces. 2. Long life combined with ease of replacing failed elements 3. Can be used continuously or intermittently 4. New and old elements can be connected in series 5. High power concentration may be applied Molybdenum Disilicide Heating Elements Parameters * Shape: I, U, UL, W, WL, Irregular * Diameter: 3/6, 4/9, 6/12, 7/12, 7/14, 9/18, 12/24(mm) * Temperature: 1700�°C, 1750�°C, 1800â?? Material Grade 1600/1700/1800/1850 Shape U, I, W, UL Hot zone length 100-300mm Cold end length 150-300mm Diameter 6-9mm Molybdenum Disilicide Heating Elements Details * The applicable temperature is between 500-1700�°C * Max temperature 1800C * The element cannot be used for rather long time in 400-700
offers high-quality stainless steel filter tubes made with metal powder such as 316L or 304 stainless steel. The sintered porous metal tube is produced through uniaxial compaction of powder in a rigid tool with the negative shape of the part and then sintered. Our sintered metal tubes can be customized to meet various applications and specifications. The tubes can be designed with different inner and outer diameters, heights, and apertures. Additionally, they can be designed for welding with stainless steel housings, making it easy to customize the diameter, aperture, thickness, alloys, and media grades. Parameters Material: Stainless steel Tube diameter: 0.5-500mm Wall thickness: 0.3-30mm Length: Customized Filtration rating: 0.5-100 microns Features High durability: Stainless steel filter tubes are highly resistant to corrosion and can withstand harsh operating conditions. Efficient filtration: The porous structure of stainless steel filter tubes allows for efficient filtration and separation of different materials, leading to high-quality and consistent results. High temperature resistance: Stainless steel filter tubes can withstand high temperatures, making them suitable for use in high-temperature applications. Easy to clean: Stainless steel filter tubes are easy to clean and maintain, allowing for long-term use and cost savings. Applications Water treatment: Stainless steel filter tubes are used in various water treatment applications, such as filtration, purification, and desalination. The tubes can effectively remove impurities and contaminants from water, leading to clean and safe drinking water. Oil and gas industry: Stainless steel filter tubes are used in the oil and gas industry for filtration and separation of oil, gas, and other fluids. The tubes can effectively remove impurities and contaminants from fluids, leading to improved performance and efficiency of equipment. Chemical industry: Stainless steel filter tubes are used in the chemical industry for filtration and separation of different chemicals and compounds. The tubes can effectively remove impurities and contaminants from chemical products, leading to high-quality and consistent results. Food and beverage industry: Stainless steel filter tubes are used in the food and beverage industry for filtration and separation of different products, such as juices, wines, and beers. The tubes can effectively remove impurities and contaminants from food and beverage products, leading to improved quality and taste. Stainless steel filter tubes are used in the for filtration and separation of different drugs and compounds. The tubes can effectively remove impurities and contaminants from leading to high-quality and safe products.
Polished stainless steel powder filter elements are manufactured using high-quality stainless steel powder that has been processed using advanced technology. These filters have a uniform structure with high porosity and pore diameter ranging from 0.2�¼m to 100�¼m, and porosity between 35% to 60%. Polished stainless steel powder filter elements are available in various shapes and sizes, including cylindrical and disc-shaped. The cylindrical filter elements have a diameter ranging from 10mm to 1000mm, while the disc-shaped filter elements have a diameter ranging from 5mm to 300mm. The filter elements generate uniform filtration and have low resistance, which reduces energy consumption. Products Parameters Material: S304/SS316L Outer diameter: 5~300mm Length: 10~1000mm (more than 1000mm can be welded) Filtration accuracy: 0.2um~100um Surface treatment Polished Inlet/outlet connection Screw thread, flange Features durability, corrosion resistance, and high-temperature tolerance can be cleaned and reused multiple times Additionally, the polishing process helps to create a smoother surface, which can improve the filter's efficiency and reduce the risk of clogging. Compatibility: Polish stainless steel filters are compatible with a wide range of liquids and gases, including corrosive and high-temperature fluids. They are also resistant to many chemicals, making them suitable for use in harsh environments. Products Applications Food Industry: Polish stainless steel filters are commonly used in the food industry to remove contaminants such as bacteria, yeast, and sediment from liquids. They are used in various applications, including filtering wine and beer, filtering cooking oil, and clarifying juices and syrups. Pharmaceutical Industry: In the pharmaceutical industry, Polish stainless steel filters are used to remove impurities and particles from liquids used in drug production. They are also used in sterile filtration to remove microorganisms and other contaminants from pharmaceutical solutions. Water Treatment: Polish stainless steel filters are used in water treatment to remove impurities and particles from water. They are commonly used to filter drinking water, wastewater, and industrial process water. Compatibility with Extreme Temperatures: Polish stainless steel filters are compatible with extreme temperatures, making them suitable for use in high-temperature applications. They can withstand temperatures up to 1000 F (538 C) and are commonly used in applications such as high-temperature gas filtration.
titanium plates are used as filter elements in many fields such as , water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry and gas purification. At the same time, the sintered porous titanium plate can also be used as a gas diffusion layer (GDL) in a new generation of fuel cells (PEMFC). offers porous titanium plates in a wide range of filter fineness and sizes. We can also perform mechanical processing on porous titanium plates, such as chamfering, punching, cutting, etc. Porous titanium plates are widely used as gas diffusion layers in the electrolysis industry. The gas diffusion layer is a key component used in electrolysis cells to transport hydrogen and oxygen to the electrode reaction surface and to transport the electric current generated by the reaction back into the electrolyte. The porous titanium plate has the following advantages as a gas diffusion layer: 1.High gas permeability: The porous titanium plate has uniform pore size distribution and high porosity, which can provide high-efficiency gas permeability, so that the gas diffusion layer has good gas transport performance during the electrolysis process. 2.Good conductivity: The porous titanium plate has good conductivity, which can effectively transport the current generated by the reaction to the electrolyte and improve the electrolysis efficiency. 3.Strong corrosion resistance: The porous titanium plate is made of high-purity titanium metal and has good corrosion resistance. In harsh environments such as strong acid and strong alkali, the porous titanium plate can maintain good stability and durability. Porous titanium plate (sintered titanium plate) specifications Filtration accuracy: 0.22um 100um (0.45um, 1um, 3um, 5um, 10um, 20um, 30um, 50um) Porosity: 30% 40% Pressure: 0.2Mpa/cm2 Temperature resistance: 300 Maximum working pressure: 0.2Mpa/cm 2 Sheet size range: 0.8-2.8mm thickness x
The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperature. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break. Product parameters Material: stainless steel 304 or 316L; Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable); Filtration accuracy: 2um-300um; Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer. Features 1.High strength and durability: This feature is achieved through high temperature sintering, which is a process of sintering material through heat and pressure without melting it. The high temperature sintering process enables the material to have a high level of strength and durability, making it resistant to wear and tear. 2.Anti-corrosion and heat resistance: This material can withstand high temperatures up to 600 C and is resistant to corrosion, which makes it ideal for use in harsh environments. 3.Steady filter rating: This material has a steady filter rating that ranges from 2 micron to 300 microns. This means that it can effectively filter out particles of different sizes, making it suitable for a wide range of applications. 4.Filter mesh not easy to deform: The filter mesh is protected by two layers, which makes it difficult to deform. This feature ensures that the filter mesh maintains its shape and continues to function effectively even under high pressure or high viscosity environments. 5.Versatile in manufacturing processes: This material can be cut, bent, punched, stretched, and welded, making it versatile in manufacturing processes. It can be easily customized to fit different shapes and sizes, making it suitable for a wide range of applications. Application aspects and industries Metal meshes of various wire sizes are sorted in a specific sequence, sintered at high temperatures, and used to create the multi-layer metal sintered mesh filter element. It is stronger than stainless steel fiber felt, more permeable than metal powder goods, evenly distributed pore size, strong corrosion resistance, high temperature resistance, weldable, renewable, long-lasting, simple to maintain, and difficult to break. Multi-layer metal sintered mesh filter elements have many applications in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation), including oil sand separation in oil fields, high temperature gas dust removal, beverage filtration, oil filtration, and water treatment.
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
Stainless steel pleated filters cartridge is a type of filter element that is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1.High Strength Against High Differential Pressures: These filters can withstand high differential pressures without loss of their filtration efficiency or structural integrity. 2.Large Surface and Filtration Area: The pleated design of these filters results in more pleats in the stainless steel filter, which means a larger surface and filtration area. This provides a greater ability to capture contaminants. 3.Washable and Reusable: The stainless steel filter element is washable and reusable, which prolongs its service life and reduces the frequency of filter replacement. This saves money and reduces waste. 4.Excellent Heat and Corrosion Resistance: These filters are highly resistant to heat and corrosion, making them suitable for use in harsh environments where other filters may fail. Applications Oil and gas production: are used in the oil and gas industry to filter out contaminants from crude oil, natural gas, and other fluids. Chemical processing: These filters are used in chemical processing to remove impurities from chemicals and solvents. Water treatment: are used in water treatment plants to remove sediment, debris, and other contaminants from the water supply. Food and beverage production: These filters are used in the food and beverage industry to filter out impurities and ensure product quality. Pharmaceutical production: are used in the pharmaceutical industry to filter out contaminants and ensure product purity. Automotive and aerospace industries: These filters are used in the automotive and aerospace industries to filter out contaminants from hydraulic fluid, lubricating oil, and other fluids used in machinery. Industrial air filtration: are used for industrial air filtration to remove dust, smoke, and other airborne contaminants from the air.
