Sintered stainless steel filter discs, also called sintered metal porous filters, adopt stainless steel 316, 316L powder as raw materials and then produced through sizing, molding and sintering processes. Sintered stainless steel filter discs have found widespread use in industries such as environmental protection, petroleum, natural gas, chemical, environmental detection, instrumentation, pharmaceutical equipment, and others. Product Parameters Material:304, SS 316L, stainless steel Max pressure:5MPa Max temperature:600 degree Types:disc, plate, cup, tube cartridge, irregular Diameter Size:2.0 mm to 450 mm Height Size:1.0 mm to 100 mm Pore Size:stainless steel (0.2-120um) Product Features 1. Superior to conventional metal filter materials in terms of shape stability, impact resistance, and alternating load capacity. 2. Air permeability, with a stable separation effect 3. High loading and unloading strength, making it suited for usage in high temperature, high pressure, and corrosive situations 4. Particularly suited to high-temperature gas filtration; 5. Products of various shapes and precision can be customized according to user requirements, and can also be used for various interfaces by welding. Applications When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, the filter element can be cleaned by backwashing or backflushing through a certain reverse pressure, so that the filter element can be used again. . Because of its many characteristics and the characteristics of repeated cleaning and reuse, it is widely used in water treatment, petrochemical filtration, seawater desalination, chemical filtration, resin and coating, hydroelectric power generation and other fields.
The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure. The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity and high flow rate. Each seal adopts argon arc welding process, no leakage, and can be used in high temperature and high pressure filtration environment. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly. Products Parameters Main filter material: SS316 SS304 SS316L SS304L Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh Regular outer diameter: 25 30 35 50 60 63.5 65 100 150mm (customized) Regular inner diameter: 25 30 35 50 100 150mm (customized) Length: Generally 5", 10", 20", 30", 40" (customized) Interface form: 222 226 215 M36 M28 M24 M22 M20 threaded interface Maximum working temperature: 500 Filtration accuracy: 1-200um Working strength: 0.1-30MPa Processing: The sealing surfaces of the filter element are joined by argon arc welding process, and the filter layer adopts multi-fold folding process to form a complete filter element without leakage and medium shedding. Features 1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low pressure difference; 2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding; 3. The high temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering; 4.Effective renewal; 5.All-stainless steel construction; broad chemical compatibility; 6.6. Reusable after chemical, high temperature, and ultrasonic cleaning. Applications Environmental protection, petroleum, chemical, medical, high temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively. 1. Filtration of various high temperature and corrosive liquids in the petroleum and chemical sectors; 2. Filtration and purification of various polymer melts in the chemical fiber and film industries; 3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils; 4. In the pharmaceutical, biological, beverage, and other sectors, the clarification and filtration of various liquids.
Product Introduction The Sintered SS 316 Wire Mesh Filter Pipe, is a brand-new kind of filter material, composed of multi-layer metal sintered mesh, which has high strength and overall rigidity. The meshes of the net are interlaced to form a uniform and ideal filtering structure. The Sintered SS 316 Wire Mesh Filter Pipe is generally divided into five layers, which are divided into four parts: protective layer, filter layer, separation layer, and support layer. This type of filter material has a high degree of strength and rigidity, as well as uniform and steady filtration precision. It is an ideal filter material for occasions that require high requirements and uniform filter particle size. Products Parameters Materials: SS304 SS304L SS316 SS316L Filtration accuracy: 1-300um Temperature resistance: -200 ~ 650 General Thickness: 1.7mm General Size: 500mmX1000mm, 1000mmX1200mm Compressive strength: 2-3Mpa Products Features A wide variety of accuracy in filtering Have dependable filtering performance from 1 to 300 Filtration accuracy is stable The filter layer�´s wire mesh is resistant to deformation because of the protection provided by the top and lower layers of wire mesh and the sintering process of diffusion and solidification Corrosion protection high temperature resistance below 650�°C. It has a high level of corrosion protection because SS316, SS304, and other materials are used It is simple to clean Surface filter material is used, making it simple to clean and particularly suitable for backwashing Products Application Stainless steel sintered mesh is a new type of filter material with high strength and overall rigidity made of stainless steel mesh through special lamination and vacuum sintering. The meshes between the layers of mesh are interlaced to form a uniform and ideal filter structure. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Yoyik lube station filter LY-10/10W-40 hydraulic tank suction strainer for Vietnam Thermal Power Our company mainly serves thermal power plants, hydroelectric power plants, metal mines, coal mines, steel plants, cement plants, petroleum, chemical, natural gas industry. All along, our company serves for many domestic large-scale construction projects to provide a lot of supporting services with first-class quality product, preferential and thoughtful service. We have set a good image and credibility to our customers. We hope to cooperate with domestic and foreign partners in the related areas. Yoyik can offer many spare parts for power plants as below: #DF-lube station filter LY-10/10W-40 hydraulic tank suction strainer-DF aquarium water filter DLS-300 filter HBX-25*1 air filter manufacturer QUQ5 centrifugal oil filter WUI-A400Ã??50FS china cartridge filter HX-250Ã??40 filter FBX (TZ)-1300*1 Air filter BDE200F2W2.X/-RV0.003 hydraulic return oil filter SDGLQ-30T-100 hydraulic duplex oil filter HX-25Ã??40W filter HX-10*20Q oil and filter change cost Z1203126 water purifier filter KLS-65T/80 hydraulic oil filter remover DRF-9002SA pp pleated filter cartridge SG125/0.8 oil filter Q2U-A63*10BS high pressure hydraulic filter C9209013 machin oil filter element SDGLQ-50T-36K filter TZX2.BH-1000*10 filter element cartridge HY-130.0163-0029Z oil filter house FX-510 180 pp melt blown filter machine MSL-32 hydraulic spin on return line filter HC9600FKZ13Z BFP lube filter XLY-25-48W coalesce filter LXM-15-50 hydraulic oil filter machine AP3E301-04D10V/-W EH oil main pump oil inlet filter HY-100-003 large flow filter element KRYJ155X700 best oil filter TZ-1300 20 air filter cartridge QU-Q3-20*2.5 filter water purifier CCX-15-5 air breather filter QUQ5 FILTER ELEMENT, OIL, OF3-20-3RV-10 filter NX-250*20 precision filter JLX-75 water filter system DLS-700 filter SFX-850*5 lube station filter LY-10/10W-40 hydraulic tank suction strainer filter HDX-63*10Q3 oil filter XUI-A10*30S filter NX-160*3 pleated filter cartridge SFBX-25Ã??30 pp filter core SGLQB-1000 filter water KLS-50T/80 water cleaning filter KLS-65T/80 pp cartridge filter SWF1 melt blown cartridge filter SG-125/0.8 pp spun filter cartridge making machine WFF-150-1 DFYL-2023-3-17-MY
The Sintered SS 316 Wire Mesh Filter Pipe, is a brand-new kind of filter material, composed of multi-layer metal sintered mesh, which has high strength and overall rigidity. The meshes of the net are interlaced to form a uniform and ideal filtering structure. Stainless steel sintered mesh is generally divided into five layers, which are divided into four parts: protective layer, filter layer, separation layer, and support layer. This type of filter material has a high degree of strength and rigidity, as well as uniform and steady filtration precision. It is an ideal filter material for occasions that require high requirements and uniform filter particle size. Product parameters Materials: SS304ã??SS304Lã??SS316ã??SS316L Filtration accuracy: 1-300um Temperature resistance: -200 ~ 650â?? General Thickness: 1.7mm General Size:500mmX1000mm, 1000mmX1200mm Compressive strength: 2-3Mpa Features 1. A wide variety of accuracy in filtering. Have dependable filtering performance from 1 to 300; 2. Filtration accuracy is stable. The filter layer's wire mesh is resistant to deformation because of the protection provided by the top and lower layers of wire mesh and the sintering process of diffusion and solidification; 3. Physical power. It has high mechanical strength and pressure resistance thanks to the fourth and fifth layers' reinforcement; 4. It is simple to clean. Surface filter material is used, making it simple to clean and particularly suitable for backwashing; 5. Resistance to high temperatures. 6.Corrosion protection; high temperature resistance below 650�°C. It has a high level of corrosion protection because SS316, SS304, and other materials are used; 7. It is simple to process. appropriate for cutting, twisting, Application Stainless steel sintered mesh is a new type of filter material with high strength and overall rigidity made of stainless steel mesh through special lamination and vacuum sintering. The meshes between the layers of mesh are interlaced to form a uniform and ideal filter structure. Widely utilized in the food and pharmaceutical sectors, particularly in two-in-one and three-in-one medical devices. 1. Precise filtration of various hydraulic oil lubricants in the machinery industry; 2. Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature and corrosive liquids in the petrochemical industry, and filtration of corrosive liquids in the pharmaceutical industry filtration, washing and drying of materials; 3. The use of fluidized plates in the steel business and gas homogenization in the powder industry; 4. Distributors in explosion-proof electrical appliances, etc.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, machining, etc. The sintered powder metal filters are widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc.
2UUL uuFilter Fume Extractor Soldering Smoke Absorber. 2UUL Mini Soldering Smoke Cleaner Dust Purifier Smoke Purification Fume Extractor Air Cleaner Filter Dedicated for Phone Repair. Feature: 1. Installation is simple and convenient, without the need for alternative pipes, is conducive to the clean and beautiful working space. 2. Triple filter design to ensure that the filter out the harmful substances in the smoke, to protect human safety. The pre-filter, medium-efficiency filter and main filter can be replaced individually, extending the life of the main filter. 3. Built-in air circulation filter to avoid indoor air / heating exhaust to the outside world, the real meaning. 4. To save energy, at the same time meet the national environmental requirements. High-power DC brushless motor, air volume, long life. 5. Low noise design. 6. Extension-type station design, air volume adjustable, directional duct adjustment, positioning freely.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, and machining, etc.. The sintered powder metal filters is widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc. 1. Titanium powder sintered filter elements Porous and sintered uniform structure, high porosity acid and alkali corrosion resistance, high temperature resistance to 600 filtration precision is 0.22-100um 2. Stainless steel powder sintered filter elements  porous and sintered stainless steel 316L powder high temperature resistance to 300 acid and alkali resistance easy to clean and replace 3. Copper powder sintered filter elements  Material: copper powder Shape: sheet, tube, cup, plate, etc. Filtration precision: 3.0-90 m precise pore size, uniform distribution Applications 1. Filtration/Separation of Liquid and Gas 2. Spargers Examples of Uses for Sparging Carbonization of Soda Carbonization of beer Stripping of Edible Oils from Oxygen 3. Breathing Ports 4. Sensor protection 5.(Throttling/Dampening) Flow Control 6. Exhaust mufflers 7. Pressure/Flow Equalization
SUS316L five-layer sintered filter mesh is a widely used sintered mesh with standard structure. It is a new type of filter material made by stacking five layers of stainless steel sintered mesh in sequence and vacuum sintering. Generally, it is a five-layer structure, which is divided into five parts: protection layer, filter control layer, dispersion layer, support skeleton layer, and skeleton layer. The standard five-layer sintered mesh filter has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and back cleaning, uniform filtration accuracy, hygienic and clean filter material, and no shedding of the wire mesh. Sintered mesh has a wide range of applications, suitable for various filtration, separation, fluid bed, powder transportation, dust removal and explosion protection, and can be used in petrochemical industry, metallurgical industry, pharmaceutical industry, water treatment, food industry, environmental protection, machinery industry and other industries. Product parameters Standard thickness: 1.7MM Standard material: stainless steel 304, 316, 316L Standard size: 500*1000MM, 600*1200MM, 1000*1200MM Note: On the basis of 5 layers of sintered mesh, add a layer of 12 mesh screen to become 6 layers of sintered mesh, with a thickness of 3.5MM, better pressure resistance. Five-layer structure display Features 1. Strong tensile strength and stiffness It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use. 2. Consistent and uniform precision It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use. 3. A wide range of applications It can be utilized in temperatures ranging from -200 �°C to 600 �°C, as well as for acid and alkali filtration. 4. Outstanding cleaning performance It has a good countercurrent cleaning effect, can be used frequently, and has a long service life (it can be cleaned by countercurrent water, filtrate, ultrasonic, melting, baking, etc.). 5. Excellent performance Excellent mechanical performance, pressure and suction filtration, ability to satisfy various filtration needs, and ease of operation. Application fields 1. In the machinery business, precise filtration of different hydraulic fluid lubricants; 2. Filtration, washing, and drying of materials in the pharmaceutical business; filtration and purification of various polymer melts in the chemical fiber film industry; filtration of various high-temperature and corrosive liquids in the petrochemical industry; 3. Use of fluidized plates in the steel sector and gas homogenization in the powder business; 4. Distributors of electrical appliances that are explosion-proof, etc.
Getter is a material that can absorb residual miscellaneous gas and water vapor and fix the atmosphere. Its main function is to absorb residual gas and increase the degree of vacuum to ensure a good vacuum state. Titanium sintered porous getter is a non-evaporable room temperature getter material. It has the advantages of high activity and good air absorption at room temperature. After activation, it can quickly and effectively absorb oxygen, nitrogen, hydrogen, carbon monoxide, carbon dioxide, methane, water vapor, etc. Among them, hydrogen absorption is reversible, usually inhaled at 500�°C, and clean hydrogen is released above 500�°C. Does not absorb inert gases such as helium, neon, and argon. The getter can be repeatedly activated and regenerated, and has a long service life. The sintered titanium getter is made of spherical titanium powder as raw material, which is sintered in high temperature vacuum after compression molding. Therefore, it has high porosity and good mechanical strength. Product parameters Product nameï¼?Titanium Sintered Porous Getters Brandï¼?TOPTITECH Materialï¼?Titanium powder Porosity : 30% - 40% Function: Absorb residual gas Size: Customized Product features 1.High gas pumping speeds The material's intricate network of pores offers a sizable surface area for gas molecules to interact with, enabling the getter to efficiently and quickly remove leftover gases. This makes titanium sintered porous getters a well-liked option in situations where high pumping rates are necessary, including in the fabrication of vacuum tubes or semiconductors. 2.Chemical stability The getter does not release the trapped gases back into the vacuum environment when it combines with the remaining gases in the vacuum system, instead creating stable titanium oxide or nitride compounds. As a result, the getter is a good and dependable way to get rid of leftover gases in vacuum systems. 3.Compatibility A variety of vacuum materials, such as glass, ceramics, and metals, are very compatible with titanium sintered porous getters, including these. They may be utilized in a number of vacuum system configurations because to their interoperability, which also makes it simple to integrate them into existing systems. 4.Long lifespan Titanium sintered porous getters have a long lifespan and can keep working efficiently for a long time, decreasing the need for routine upkeep and replacement. They are a practical choice for many vacuum system applications because of their longevity. Product application 1.Getter for high vacuum 2. Getter for vacuum pair glass 3. Getter for ultrahigh purity gas purifying 4. Getter for VIP ( VIP Vacuum Insulation Panel )
High-porosity metal nickel fiber felt is a patented product, which is a three-dimensional nickel felt made of metal nickel fiber developed in chemical and metallurgical processes. The purity of nickel fiber felt is 99.5%. It is a new material with light weight, good flexibility, adjustable porosity and felt thickness. Metallic nickel felt is made of micron-sized pure nickel fiber in accordance with international technical standards, through a special felting process and ultra-high temperature vacuum sintering process. Compared with nickel mesh or nickel powder sintered plate, nickel fiber felt has a good three-dimensional network porous structure, high porosity, large specific surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, good heat dissipation, and current density high, low voltage, stable performance, long life and other advantages. Widely used in fuel cells, military industry, aerospace, civil, medical and other industries. Especially hydrogen fuel cell diffusion media: anode diffusion layer (GDL) for proton exchange membrane (PEM) water electrolysis. Product parameters Color: light gray Size: Customized on request Thickness: 0.2mm-2mm common thickness (0.25, 0.4, 0.5,0.6, 0.8, 1.0mm) Porosity: 60-70% (can be customized upon request) Shape(can be customized) polygon,round,ring,disc,etc. Product Features Good electrical conductivity High mechanical strength Good chemical stability Strong corrosion resistance Large specific surface area The fibers in the sintered fiber mat are overlapped with each other, and each fiber is welded with several fibers. The overlapping points are in a slightly fused state, and the entire fiber mat forms a complete conductive network with excellent electrical properties. And it also has a large specific surface area, which is mainly determined by the characteristics of the preparation process of the nickel fiber felt. The drawn fiber itself has a large surface area, and the fiber is laid into a net to form a network structure that is evenly overlapped with each other. Manufacturing flow Nickel wire Cluster drawing Nickel fiber Fiber shear Air-laid Sintering Nickel fiber felt Application fields Filter materialPhotocatalyst series air filter screenChemical catalyst and support materials Battery electrode material Heat exchange and adsorption materials
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance. The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy. Product parameters Material: 316L, 304 Specifications: OD 8- 37mm Length 10-50mm Accuracy: 1-50 m Temperature resistance: 600 Maximum working pressure difference: 0.6Mpa Application Environment Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments Product features 1. Good mechanical properties 2. Stable shape 3. Good air permeability 4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static 5. High temperature resistance 6. Uniform bubbles, wide range of gas dispersion, no clogging Product applications 1. Catalyst recovery 2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam 4. Noise reduction, flame resistance, gas buffer Craftsmanship The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use. Filtration principle A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
The SS sintered mesh filter disc is made of multilayer (usually five layers) 316L or 304L stainless steel wire and is sintered by high-temperature vacuum, argon arc or plasma welding. Adjust the size and distribution of holes by selecting the wire diameter, mesh size, and weaving method of the wire mesh. Sintered wire mesh has excellent filtration precision, filtration resistance, mechanical strength, wear resistance, heat resistance and processability. Product specification Material: SUS316L, SUS304L Size: Length 500-1200mm; Diameter 20-400mm Filtration accuracy: 1~100�¼m The standard five-layer sintered mesh includes: a reinforcement layer, reinforcement layer, separation layer, filter layer, the protection layer Shape: square, round, shaped (customized) Product Features 1. Economical option. 2. Uniform aperture. 3. High temperature & corrosion resistance. 4. Cleanable & reusable. Applications 1) Used as a dispersed cooling material in high-temperature environment 2) Used for gas distribution, air flotation transportation, fluidized bed, gas collection, shock absorption, noise reduction, flame retardant 3) Used as a high-precision, high-reliability filter material 4) For high-pressure backwash oil filter Package 1. The SS sintered mesh filter elements� are usually packed in cartons, wrapped in soft film, and fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags to ensure that the products have no collision, no shaking, and no damage during transportation.
Product Introduction Filter elements with smooth outer wall types are made from stainless steel powder filter elements through special processing, with a smooth surface and poor ability for impurities to adhere. When the impurities attached to the surface of the filter element reach a certain weight, they will naturally fall off from the outer wall of the filter element, reducing the degree of clogging and thus greatly e tending the cleaning cycle of the filter element. Product parameters Material: SS304 SS304L SS316 SS316L Filtration accuracy: 0.22-100 microns Porosity: 30%-50% Applicable temperature: 450 Shapes: Tubes, plates, sheets, discs, rings, rods, cones and sheets, strips are currently available Product features 1. It has high mechanical strength and can be used in high-pressure working conditions without causing deformation and damage to the filter element components and powder materials. 2. It has good thermal conductivity. Because the metal powder is made of a metal or alloy that has good thermal conductivity, the powder tube also has outstanding heat dissipation performance in high-temperature applications, which lowers the thermal stress on the filter element and lengthens its useful life. 3. It has good sealing performance. Filter element filtration is performed at a specific pressure, hence the necessary filter element needs to operate well when sealed. Product application 1.The concentration-matching link of filtration equipment in the pharmaceutical industry, drying three-in-one filter components, gas filtration and impurity removal, and filter elements for decarbonization and filtration of security filters, etc. 2. Decarbonization filtration, fine material filtering, and impurity elimination in the manufacturing of raw materials and liquid pharmaceuticals in the chemical industry. 3. In the water treatment industry, the ultrafiltration, RO, EDI system's front security filter filters and removes impurities, after ozone sterilization, filters and ozone aeration. Product Packaging and Shipping Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation; Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Product Introduction Stainless steel powder sintered gas filter elements generally include stainless steel powder sintered filter discs, filter plates and filter tubes. The filter piece is made of raw material stainless steel powder (generally SS304 or SS316L) after being pressed and formed, then put into the sintering furnace for high-temperature vacuum sintering. The filter tube is mainly made of stainless steel powder by cold isostatic pressing, and then sintered. made. This type of product has the characteristics of high temperature resistance, high mechanical strength, uniform pore size distribution, good air permeability, cleanable regeneration, corrosion resistance, and is widely used in catalyst recovery, petroleum, chemical industry, medicine, food, beverage, metallurgy and other fields. Gas-liquid filtration and separation; dust removal, sterilization and oil mist removal of various gases and steam; noise reduction, flame retardant, gas buffering, etc. Products parameters Name: Sintered porous stainless steel filter elements for pharmaceutical filtration Material: 304/316L Filtration accuracy: 0.22 micron-100 micron Porosity: 30%-40% Applicable temperature: 600 Products size Stainless steel powder sintered filter: �?20mm-1000mm Stainless steel powder sintered filter tube: �?14mm-80mm, length 20mm-1500mm Products features 1. Stable air permeability and separation efficiency; 2. Excellent mechanical strength; 3. Suitable for high temperature, high pressure and strong acid and alkali corrosive environment; 4. High temperature resistance; 5. Can be welded and machined. Typical application Catalyst filtration and recovery; Filtration of high temperature gas in petrochemical industry; Purification of high temperature flue gas in metallurgical industry;  Recovery of dust in the tail gas of solid fluidized bed;  Purification of dust and tail gas in thermal power generation and nuclear power generation industry; Filtration of liquid products and liquid raw materials in the chemical industry. Product Packaging and Shipping Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation; Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Product Introduction Titanium sintered fiber felt is a new type of porous and breathable material. It is made of titanium wire drawn into a fiber shape, processed by special weaving process, pressurized and then sintered in high temperature vacuum. It has the characteristics of controllable fiber diameter and porosity. Because of its unique three-dimensional network fiber skeleton and fully connected pore structure, it is widely used in filtration and separation, sound absorption and noise reduction, electromagnetic shielding and other fields. Product parameters Product name: Titanium sintered fiber felt for petrochemical waste liquid filtration Raw material: GR1 titanium fiber Size: customized (0.2mm\0.4mm\0.6mm\0.8mm) Shape: custom (polygon, round, ring, disc, etc.) Porosity: 60%-80% Features 1. Anti-corrosion; 2. High specific strength; 3. High temperature resistance; 4. Large porosity; 5. Large surface area, strong dirt holding capacity; 6. Washable and reusable. The main purpose Filtration of various high temperature and corrosive liquids in the field of petrochemical power plants Production Process The titanium wire is drawn to a micron-scale diameter, and the titanium wire is stacked according to a special laying method, then pressurized, and then placed in a high-temperature vacuum environment for sintering, so that the nodes between the fibers are fused, Finally, a three-dimensional three-dimensional network structure is formed.
High pressure filter HPU250A-GE-STO-061-1 for North West Power Generation YOYIK is a hi-tech company specializing in the production, development and sale of spare parts for power plant. The company is located in China's heavy-duty base in Sichuan Deyang. The company's product type has sealant, insulating material, filter, power plant, pump, valve, sensor processing parts, bearing and other goods, mainly used in chemical industry, power plant, steel and other areas. Yoyik can offer many spare parts for power plants as below: #DF-High pressure filter HPU250A-GE-STO-061-1-DF Insulation Tape ET100 Overvoltage signal relay PLC-RSC-24DC/21 hydraulic oil filter pump with cart TZX-E400*3Q3 pressure hose SMS-12/15-3048-B line filter element HX-100*1W solenoid valve 4WE10D-20/AG110NZ5L multistage centrifugal pumps KSB65-250B BFP solenoid valve 4WE6J-61B/CG24N9Z5L pressure controller switch 4NN-K5-N4-B1A bulk oil filters HX.BH-100*30 Conductive Groove Liner oem oil filter NX-630*5 EH OIL PRESSURE HIGH HC0622-24 P=2.4bar I=5A AC lube pump impeller nut 125LY-23-4 BFP filter QF6803GA20H1.5C Red Epoxy Modified Coating Varnish 183F differential pressure Regulator 125ZXQ016L13NOERH Filter element SFAX.BH800*3 oil filter wrench ZU-E400*20FS Pump impeller 100LY-215-2 Magnetic Liquid Level Indicator CEL-3581A/GF Grinding roller air breather 20MG40.11.09.01 LVDT displacement sensor TDZ-1E-31 solenoid valve 280251/24VDC generator sealing oil vacuum pump 30WSRP vacuum pump Valve bolt P-537 solenoid valve for carrier humidifier 300AA00309AMCSCH110DG000010 Variable speed hydraulic coupling YOTCGP650 Differential Expansion Contrller HZD-8500B-WY82-A2-B1-C1-D2 solenoid valve refrigeration 165.31.56.04.01 300MW turbine AC lube pump volute 125LY-35-4 Oil filter element HX.BH-100*1W oil transfer electric pump 125LY-35-2 magnetic coupling centrifugal pump DFB80-50-240 Insulating Box Filling Adhesive pp water filter cartridge SGLQB-1000 High pressure filter HPU250A-GE-STO-061-1 oil filter AD1E101-01D03V/-WF Lubricant filter HPU-V100A BFP lube filter YSF-15-11.2A Sealant T2575 Roller Sealing Ring 20MG30.11.09.92 valve J761-003 DFYL-2022-10-27-MY
Single Row Radial Ball Bearing GN215 KLLB C1 Chinese steam turbine parts Our company is equipped with high-precision cutting-edge technology. Our products are mainly used in chemical industry, power plants, steel and other areas. Product types include sealant, insulation materials, filter, power plants, pumps, valves, sensors processing parts, bearings and other commodities. Yoyik can offer many spare parts for power plants as below: #DF-SINGLE ROW RADIAL BALL BEARING GN215 KLLB C1-DF oil filter finder WU-A250*100FS EXTENTION CABLE CWY-DO-812502 Steam Turbine Generator Sealing Grease SWG-1 pressure hose SMS-20-1829mm-C best oil filter TZ-400*1 oil filter house NX-25*1 filter cartridge housing XW-850*40H hydraulic filter breather Q3UI-A400*5FS stainless steel filter cartridge AD3E301-04D03V/-W hydraulic return filter HPU-V150/A Regenerating Circulating Pump Suction Filter WU-100*80J Grease Gun Nipple G.NPL.BH.R1/4 oil filter cartridge 0060D020BN-HC Terylene Fiberglass Strip �?10 DFB Type single stage centrifugal pump CZ65-250A Filter element of oil pump inlet oil pump HFO S150*1120 servo motor valve DJSV-001A Sensor speed turbine CS-1 G-065-06-01 Transmitter CWY 5M Hydraulic Filter SFAX-630*3 Sevomoter Filter element HQ25.10Z Seal blast pipe 20MG20.11.23RG Epoxy Solvent-Free Adhesive J1102 oil filter equipment LH0110D005BN/H double drum filter element FAX (NX)-630*20 sensor CMS-111 0~0.6MPa Accumulator A-40/31.5-L-EH output shaft speed sensor CWY-DO-20T08-B-M10*1-00-05-50 filter pressure hydraulic ZU-H100X20S Titeseal sealing compound 20-75 Manifold for Solenoid Valve 200M-5F oil press filter STZX2-160*3 air filter equipment BDE400N2W1.X/-RV0.003 oil pump replacement 3G60-106 line filter element 0280D005BN3HC BFP Lube Oil Filter YSF13-4.2J SINGLE ROW RADIAL BALL BEARING GN215 KLLB C1 servo valve amplifier ABEX425-1607 STG Jack Oil Outlet filter(Small) HDX-25*40 centrifugal oil filter YQ2U-A250*30S Semiconductor Anti-Corona Varnish 1243 F-class room temperature dried GEAR OIL PUMP KCB-55 Accumulator charge adapter nxq 2-L 63/31.5-h Grinding roller lock ring 20MG50.11.09.91 Medium speed grinding Spiral Shell JX34.10.05.01BG servo valve control 760N1190B DFYL-2022-10-27-MY
Hydraulic Oil Suction Filter WU-100x100-J China replacement supplier Sold by YOYIK. Deyang YOYIK is a professional production, development, sale of power plant dedicated spare parts and accessories processing company. Through more than 21 years of efforts, the majority of customers have been fully recognized. Yoyik can offer many spare parts for power plants as below: #DF-Hydraulic Oil Suction Filter WU-100x100-J-DF Accumulator bladder 25MG43.11.14.01 servo valve controller 0508.963T0101.AW036 solenoid valve CCS230D 16.5W 230VAC filter pressure hydraulic JWU-160*100LYZ lvdt-sensor HTD-250-3 oil filter elements SFAX-40*10 hydraulic filter micron rating ZU-F25*10BSIII hydraulic oil filters XU-A100*50BS Frequency Inverter, 15 kW ACS800-01-0020-3+P901 hydraulic filter and housing ZU-A10*10BS hydropneumatic accumulator NXQA-4/315-L servo valve function BGCD-6121B governer cabinet filter HC8300FKN39H sealing oil differential pressure valve 977HP Stop Check Valve WJ15F2.5P hydraulic oil filter pump with cart TZX-E63*5Q3 pressure hose S110-AC-AL-0063 china cartridge filter GY93.100X*20 Roller core 20MG40.11.09.94J filter cartridge STZX2-160*10 CASE EXPANTION MONITOR DF9032 hydraulic filter testing STZX2-100*1 8mm Eddy Current Sensor PR6423/010-010 bolt induction heater ZJ-20-T12(A) motor servo valve S63JOGA4VPL oil filter cartridge CFF2-520*180 solenoid valve block D1VW020HVZP91XB510 oil filter machine price PQI-H450*3Q3SIII fluid transfer pump 125LY-23 Filter mill LXM-10-60 separation filter FAX (NX)-1000*20 Hydraulic Oil Suction Filter WU-100x100-J oil filter machine DL001002 stainless steel globe throttle check valve (welded) WJ40F1.6-II DN40 Mechanical seal MG60.20.02.01 stator water pump mechanical sealshaft sleeve CZ50-250 gear oil pump DLZB820-R65-8 Filter element of oil pump HFO HX-250*10Q Grinding roller air breather ZGM95G-08-62 outlet filter HBX-40*1 Sealing Compound T25-66 Cartridge valve AM-501-1-0149 110VDC chemical filter cartridge 0950R005BN3HC/-V EH oil test solenoid valve 02-178108 electronic pressure switch 4NN-K5-N4-B1A-X371 piston pump PD060PC02SRS5AC00E1200000 Heavy Sealant Injector 3.463.338 hydraulic filter placement Q3U-H100*3S machine oil filter FBX-63*10 Red Insulating Varnish Thinner 183F Bolt Heating Device ZJ-17-T5 oil filter elements YQ2U-A160*20S hydraulic return oil filter Q2U-A160*10S heater cartridge 220v ZJ-20-57A Plug valve SD61H-P35 50C DFYL-2022-10-27-MY
Customized cylinder titanium filter tube cartridge is a new type of high-efficiency porous filter material made of metal� titanium powder� as the raw material through powder sieving, cold isostatic pressing molding, sintering, mechanical welding processing, etc., because its pores and filtration accuracy can be carried out in a wide range Adjustment is widely used in the fields of self-lubrication, filtration, separation, catalysis, flame extinguishing, heat exchange, thermal electron generation, and gas distribution. Brand: TopTiTech Origin: Baoji, China Material: Titanium Main purpose: used for gas and liquid filtration and gas distribution. Filtration accuracy: 0.2-50�¼m Diameter: 30-80mm Length: 100-1000mm (special specifications can be customized) Filtration principle: Customized cylinder titanium filter tube is a porous titanium metal filter material made by powder metallurgy. Its internal pores are curved and crisscrossed. The pore size distribution is uniform. The filtration mechanism is typical of deep filtration. Performance: This product has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy filter accuracy, and easy regeneration; the titanium filter is formed by titanium powder formed and sintered at high temperature, so the surface particles are not easy to fall off; in the air the use temperature can reach 500-600â??; it is suitable for the filtration of various corrosive media, such as hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia, and iron, copper, sodium, and other chloride solutions; It has excellent mechanical properties, and can be cut, welded, and another machining; high compressive strength, internal pressure damage strength up to 2MPa or more; 7. its filtration accuracy is easy to ensure, even if it works under high temperature and pressure, the pore size will not be deformed; the porosity is up to 35-45, the pore size distribution is uniform, the dirt holding capacity is large; the regeneration method is simple and can be reused after regeneration. Application Liquids or gases filtration in high temperature and pressure; Filtration of liquids or gases containing ozone; Prefiltration and decarbonization in pharmaceuticals industry, as a small injection, oral, etc ; Highly corrosive liquid and gas purification.
