Water capacity 46.7 Litre
Our business operation includes manufacturing and sales of the B1 and B3 grade pressure Vessels and after-sale service; Developing and studying the advanced materials and technology about the B1 and B3 grade pressure Vessels; technological development; technology transfer, technical advice and technical service, etc . Our tanks factory can provide LPG tanks,LNG tanks,CNG tanks, producing various type of pressure vessels, including high pressure seamless Aluminum Alloy cylinders, Aluminum Alloy liners for carbon fiber wrapped cylinders, fully wrapped carbon fiber wrapped cylinders, portable oxygen respirator and sample cylinders , spherical vessels, Storage and transportation equipmentï¼?Hydrogen energy and industrial gas storage and transportation equipment, high presure (70Mbar) hydrogen synlinder III type and IV type, etc and accessories.When this factory was founded,we purchased the most advanced equipment and recruited a group of skilled front-line workers. And, it is an appointed enterprise specializes in manufacturing LPG steel cylinder,tanks etc by the Ministry of Labor. We are dedicated to supplying only the finest products to both international and domestic customers. it covers an area of 68000 Square meters.There are 100 front-line workers,12 technologists and 6 quality inspector in our factory.The registered capital of our company attains 51.8 million RMB.And our annual sales can reach 1,200,000 pieces. Used in the following fields: 1,Industrial Specialty Gas Cylinders 2,Carbon fiber wrapped Composit... 3,Scuba Aluminum Alloy Gas Cylin... 4,Sampling Cylinders 5,Portable oxygen devices 6,Beverage Cylinders(CO2) 7,Compressed (70Mbar) hydrogen cylinder for vehicle/BUS/car 8,Hydrpgem cylinder for drone
Our business operation includes manufacturing and sales of the B1 and B3 grade pressure Vessels and after-sale service; Developing and studying the advanced materials and technology about the B1 and B3 grade pressure Vessels; technological development; technology transfer, technical advice and technical service, etc . Our tanks factory can provide LPG tanks,LNG tanks,CNG tanks, producing various type of pressure vessels, including high pressure seamless Aluminum Alloy cylinders, Aluminum Alloy liners for carbon fiber wrapped cylinders, fully wrapped carbon fiber wrapped cylinders, portable oxygen respirator and sample cylinders , spherical vessels, Storage and transportation equipmentï¼?Hydrogen energy and industrial gas storage and transportation equipment, high presure (70Mbar) hydrogen synlinder III type and IV type, etc and accessories.When this factory was founded,we purchased the most advanced equipment and recruited a group of skilled front-line workers. And, it is an appointed enterprise specializes in manufacturing LPG steel cylinder,tanks etc by the Ministry of Labor. We are dedicated to supplying only the finest products to both international and domestic customers. it covers an area of 68000 Square meters.There are 100 front-line workers,12 technologists and 6 quality inspector in our factory.The registered capital of our company attains 51.8 million RMB.And our annual sales can reach 1,200,000 pieces. Used in the following fields: 1,Industrial Specialty Gas Cylinders 2,Carbon fiber wrapped Composit... 3,Scuba Aluminum Alloy Gas Cylin... 4,Sampling Cylinders 5,Portable oxygen devices 6,Beverage Cylinders(CO2) 7,Compressed (70Mbar) hydrogen cylinder for vehicle/BUS/car 8,Hydrpgem cylinder for drone
A cam is generally a disc or a cylinder mounted on a rotating shaft, which gives a special motion to a follower, through direct contact. The cam profile is determined by the required follower motion and the design of the type of follower.CAM is used and can be used to produce almost any item created by a machine or tool. It can be used to create models from metal, plastic and even wood. Its main roles are: Tool path designs create computer models of new designs.
Custom-made pneumatic cylinders are produced daily in our factory; in Aluminum, Brass, Steel and Stainless Steel; sizes from 10 mm to 2.000 mm; Single- and double-acting, with and without end cushioning, integrated valves or locking devices. We are highly experienced in that field and worldwide a top address for custom-made cylinders.
Gas Cylinder Meter Our Company Feature is Brands Customize Services! We can give you a unique design, Exclusive to your product ! Product use: All kinds of public places and kitchens. The main function is to calculate the gas bottle weight. Product parameters: Power supply: 2 AA batteries, or 3.3v power supply Maximum load capacity: 50KG, accuracy: 25g; This program is compatible with LED version Full display for 2 seconds after power on, and then display the sign of the bottle When gas capacity is 100% to 75%, display 4 bars, 75% to 50%, 3 bars, 50% to 25%, 2 bars, 25% to 15%, 1 bar, 15%-10%, single bar flashes, 1S/ time, below 10%, single bar and bottle sign flash together.
Product use: All kinds of public places and kitchens. The main function is to calculate the gas bottle weight. Product parameters: Power supply: 2 AA batteries, or 3.3v power supply Maximum load capacity: 50KG, accuracy: 25g; This program is compatible with LED version Full display for 2 seconds after power on, and then display the sign of the bottle When gas capacity is 100% to 75%, display 4 bars, 75% to 50%, 3 bars, 50% to 25%, 2 bars, 25% to 15%, 1 bar, 15%-10%, single bar flashes, 1S/ time, below 10%, single bar and bottle sign flash together.
Make - Daihatsu Model - DK20 Description - Cylinder Liner Part Number - E205050040 Specs - NA Category - Korean
Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Specification: We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes . Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications. Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices. Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products. Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure. Advantages: 1. Excellent insulation, security, long working life. 2. High temperature resistance. 3. Resistance to electric breakdown. 4. Stand wear and tear. 5. High strength. 6. Corrosion resistance. 7. Good compactness. 8. HIgh hardness.
4089153-QSX15 ISX15 X15 cylinder liner 4089153 4309389 4025311 4101507 WUHAN HUACUMDA MACHINERY CO.,LTD Huacumda,Specialized in supplying Cummins,Komatsu,Hyundai,Yanmar Diesel Engine Assy and Engine Spare Parts. Products Including: Engine Assy: B,C,L series,QSB series, QSL series, ISDe series K19,K38,K50,NTA855,QSX15 ....Etc. Engine Spare Parts: Cylinder Block,Head,Crankshaft,Camshaft Piston kit,Gasket kit Connecting Rod Fuel pump,Injector,Water Pump Air compressor, Alternator, Start Motor ...Etc. Delivery Terms: 1)More stock for sale 2)Parcel will be sent in 24 hours after payment , by DHL,FEDEX,UPS. 3)More order, More discount
Rotogravure cylinder making line: 1. Electro-plating equipment for rotogravure printing cylinder (Including Washing, Nickel/Copper/Chrome Plating, Degreasing, De-chrome) 2. Rotogravure cylinder grinding machine 3. Copper polishing machine 4. Chrome polishing machine 5. Proofing machine 6. Engraving machine
Product name: scd series pneumatic cylinder Working temperature: 0~70 degree celsius Working speed range: 30~800mm/s Pressure: 0.5~8 kgf/cm Buffer type: adjustable buffer Features of scd series standard pneumatic cylinder 1. Double rod type. 2. It's tie rod cylinder. 3. There are several modes of back cover so that the installation of clinder wil be more convenient. 4. Various sizes of cylinders and mounting accessories for your choice. Remark: the medium used by the cylinder must be fitlered to 40 m or below.
We have been professionally producing high quality SDA Compact cylinders for more than ten years. It can effectively minimize the space requirements. A compact air cylinder functions in the same manner as a standard air cylinder with both single and double acting, single or double rod, and non-rotating models. However, compact cylinders minimize space requirements by allowing for precise, direct mounting in the least amount of space possible.
Features of SC Series Standard Pneumatic Cylinder: 1. Double acting type 2. It's tie rod cylinder 3. There are several modes of back cover so that the installation of clinder wil be more convenient 4. Various sizes of cylinders and mounting accessories for your choice Note: The medium used by the cylinder must be fitlered to 40m or below. Product Details: Acting Type: Double Acting Pressure Range: 0.05Mpa--0.8Mpa(7.3--116Psi) Working Temperature: 0--70 Degree Celsius Cushion: Adjustable Cushion Packing: In Cartons Proof Pressure: 1.35MPa(195psi) Working Speed Range: 50--800 mm/s
Specification of MAL Series Aluminum Cylinder: Bore: 16 20 25 32 40 Operation Type: Double Acting or Single Acting Working Medium: Air Pressure Range: 0.05Mpa--0.85Mpa(7.3--123Psi) Proof Pressure: 1.35MPa(217psi) Working Temperature: 0--70 Degree Celsius Working Speed Range: 50--800 mm/s Cushion: Gasket Cushioning Port Size: M5X0.8 G1/8 G1/4 Mounting Accessories: BASIC, LB, FA, SDB
FR.L combination and F.R.L combination is a device that conditions air for use in pneumatic systems. An frl is a combination filter-regulator-lubricator. Products Details: Max. Operating pressure:1.0mpa(145psi) Working temperature:5--60 Degree Celsius Capacity of oil cup: 90 cc Filtering grade:40μm Pressure range: 0.05--0.85mpa(7--123psi) Proof pressure: 1.5mpa(217psi) Capacity of filter cup: 60 cc
Smc pneumatic lubricator Model:al2000-02, al3000-03, al4000-04, al4000-06, al5000-10 Fluid: air Proof pressure: 1.5mpa(217psi) Max. Operating pressure: 1.0mpa(145psi) Ambient and fluid temperature: 5--60 Recommended lubricant: class 1 turbine oil(iso vg32)
Double jersey cylinder Brand: according to clients requirement Material: imported steel Diameter: 6, -68, Gauge:
Single jersey cylinder Brand: according to clients, requirement Material: imported steel Diameter: 6''-68'' Gauge:
