2# Antifoam Agent 1.DESCRIPTION The product is excellent antifoam. It has good compatibility performance. 2.APPLICATIONS The product is usually suitable for all lubricants, especially for engine oil and gear oil. 2# antifoam agent is easy to use. 2# can be added directly into oil at 60â??-70â?? without dilution step. 3.THE RECOMMENDED DOSAGE The recommended dosage is from 100ppm to 200 ppm. 4.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash Point (COC), â??  min 30 GB/T267 Anti-foaming property  (24â??,500SN)ml/ml      25/0 GB/T12579 Air releasing property (500SN) min 12 SH/T0308 Water, m%   Trace GB/T 260 Mechanical impurities, m%  max 0.02 GB/T 511 5.STORAGE AND TRANSPORTATION It is packed in 200 liter metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
1# Antifoam Agent 1.DESCRIPTION The product is excellent antifoam. It has good compatibility performance. It tinily affects oil air releasing property. 2.APPLICATIONS The product is usually suitable for all lubricants, especially for hydraulic oil.1# antifoam agent is easy to use. 1# can be added directly into oil at 60??-70?? without dilution step. 3.THE RECOMMENDED DOSAGE The recommended dosage is from 100ppm to 200 ppm. 4.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash Point (COC), ?? min 30 GB/T267 Anti-foaming property (24??,500SNä¸) ml/ml 100/0 GB/T12579 Air releasing property (500SN) min 12 SH/T0308 Water, m% Trace GB/T 260 Mechanical impurities, m% max 0.02 GB/T 511 5.STORAGE AND TRANSPORTATION It is packed in 200 liter metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
T830C Pour Point Depressant for Intermediate based oil 1. DESCRIPTION The product is an orange yellow transparent thick liquid. It shows good pour point depression ability ,increasing viscosity ability and improving the viscosity index. It can substitute for traditional pour point depressant. 2. APPLICATIONS The products are used primarily for various industrial oils and engine oils. 3. THE AMOUNT USED REFERS The dosage is from 0.3% to 1.0%. 4CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash Point (open cup), °C min 135 SH/T 3536 Kinematics Viscosity (100°C), mm2/s min report GB/T 265 Ash, m% max 0.20 GB/T 508 Pour Point Depression Degree, °C min 15 GB/T510 Water,m% max 0.05 GB/T 260 5. PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
RD106D (TBN400) Long-Chain Linear Alkyl Benzene High Base Synthetic Calcium Sulfonate 1.DESCRIPTION RD106D is prepared from long-chain (C20-24) linear alkylbenzene sulfonic acid. It can provide lubricants with strong acid neutralizing ability, detergency & dispersion effects and antirust performance as well. It also has fine thermal stability, oil solubility, antifoam and anti-aqueous properties. 2.SPECIAL FEATURES Strong acid neutralizing ability Good detergency performance Antifoam Fine hydrolytic stability Antirust performance 3.APPLICATIONS Used for blending high grade and medium grade of engine oils and marine engine oils.The recommend dosage: 1.5% to 20.0%. 4.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Appearance Brownish-red viscous liquid Visual Density (20°C),kg/m3 1150-1250 GB/T265 Flash Point (COC)°C 170 GB/T3536 Kinematic Viscosity (100) 180 GB/T265 TBN,mgKOH/g 395 SH/T0251 Calcium,m% 14.0 SH/T0297 Sulphur,m% 1.2 SH/T0303 Water,m% 0.20 GB/T260 Impurities,m% 0.10 GB/T511 5.STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. Store in dry, clean and ventilating warehouses. 6.PACKING The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
RD105 Middle Base Number Synthetic Calcium Sulfonate 1. DESCRIPTION The product can provide engine oils with fine high-temperature detergency, acid neutralizing ability and antirust performance. The engine oils blended with RD105 can reduce the high-temperature deposits. 2. APPLICATIONS The product is used for blending high and medium quality engine oils and antirust oils as well. 3. THE RECOMMENDED DOSAGE The recommended dosage is from 0.5% to 3.0%. 4. CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Kinematics Viscosity (100°C), mm2/s Report GB/T 265 TBN, mg KOH/g 145 min SH/T 0251 Calcium, wt% 6.85 min SH/T 0297 Sulfur, wt% 1.8~2.2 SH/T 0303 Flash point (COC), °C 180 min GB/T 3536 5. PACKING AND STORAGE It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
J0050 EPM Ethylene Propylene Monomer 1.ESCRIPTION Ethylene propylene copolymer is polymerized by ethylene and propylene. It is primarily used in blending high-grade internal combustion engine oils. The product is white transparent colloid. It is solid in normal temperature. 2.KEY PERFORMANCE BENEFITS Excellent thickening capacity Excellent shear stability and thermal oxidation stability Good compatibility with all functional additives and pour point depressants Improve the low temperature property of oil Good oil soluble 3.TYPICAL VALUE ITEM INDICE TEST METHOD Appearence White bulk, eyeballing Volatility, % �0.75 GB/T 6373 (Oven Method) Ash Content, % �0.10 GB/T 4498 (Method A) Ethylene Content, % 48.1-53.1 Q/SY JH C 104001 Vanadium Content, ppm �10 Q/SY JH C 104004 Mooney Viscosity ML (1+4) 100 °C 45-55 GB/T 1232.1 Shearing Stability Index (SSI) �40-45 ---- 4.PACKING The product is packed in polypropylene plastic bags. Each bag weights 25 kilogram. Every 42 bags are packed in a wooden box. The net weight of each wooden box is 1.05 ton. 5.STORAGE Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Cup Tester "F" type Cup Tester assemblies are designed to be attached to the drill string and then running into the casing beneath the wellhead to pressure test the blowout preventer stack and the wellhead. When the F type Cup Tester is running into the casing beneath the wellhead, pressure is applied to either a test pump, or by hoisting the "F" type cup after filling the hookup with water. The latter method is fast and accurate. The Cup Tester assemblies are rated to the API standard mill test pressure for casing sizes up to 10,000 psi. Hanlling has the sizes, pressure ratings and connections for every single one of your jobs. Hanlling Cup Tester assemblies come standard with internal flush (IF) connections. Other connections are available at an additional cost. Anytime the "F" type Cup Tester is used; care should be taken to ensure that the drill pipes load capacity is not exceeded. This can be checked by adding the weight of the suspended pipe to the vertical load due to pressure. To find this multiply the cup pressure area (IN.2) by the pressure. The table below shows the total load capacity for each size tester. When ordering please specify: 1. Casing size & weight 2. Part number 3. OD, ID, and drift diameter.
Organic has set up its bentonite processing facility in the year 2015 having one of the largest manufacturing facility of bentonite powder and lumps in India located in Bhuj.in the state of Gujarat equipped with state of the art manufacturing facility with a capacity of 4000Mts per month. An introduction to Bentonite which is a highly colloidal clay mineral formeddue to the decomoposition of volcanic ashs, it has the ability to absorb large quantities of water and expand to several times its normal volume, it gets its name from the place where it was first discovered – Fort Benton,America. Bentonite is naturally occurring hydrated Alumina Silicate, there are two types of bentonite manily calcium and sodium. Sodium Bentonite swells or expands to a greater degree than its calcium equivalent. Sodium Bentonite has higher swelling capacity, this property develops higher viscosity in suspensions, greater state of disaggregation,formation of smaller clay particles or greater colloidal properties. The greatest application of sodium bentonite in industries is the result of its swelling property. The sodium bentonite having more water absorpation capacity makes it suitable for industries like Foundry and civil engineering application and the calcium bentonite absorb lesser then sodium still it has some special application like cosmetics, paper Animal feed binder as many more to describe.
Ferrous Sulphate Heptahydrate Chemical formula: FeSO4.7H2O HS No.: 28332910 CAS No.: 7782-63-0 EINECS No.: 231-753-5 Standards: HG/T2935-2006 Appearance: Light green crystal Purity: 90%, 95%, 98%, 99% according to customer's requirement.
99.99% TiO2 titanium dioxide sinter Our titanium dioxide has one category: sinter. The product in this picture is sinter tablet. Applied in AR coating; Beam Splitter; Cold light coating filter; HR coating; Glasses coating We follow critical manufacture standards, quality assurance, welcome your consultation! Specifications Summary: Titanium dioxide(Chemical formula: TiO2) 1.sinter tablet: 9*5mm 2.sinter granule: 1-3mm; 3-5mm 3.color: black white 4.purity: 99.99% 5.package: 1 KG/ bag 6.storage: avoid exposure to sunlight & acid keep dry titanium dioxide properties: 1.cas no.: 13463-67-7 2.density(g/cm3): 4.29 3.evaporation temperature(â??): 2200 4.refractive index at 550nm: 2.3 5.transparency range(μm): 0.36~9 6.evaporation source: RE; RS 7.applications: AR coating; beam spliter; cold light coating filter; HR coating; Glasses coating
1. Commodity: anchor,anchorge; 2. Standards: ASTM/BS/JIS/JIG/AS; 3. Packing: box or wood carton; 4. Wedges: 2pcs or 3pcs; 5. Holes:one hole to many holes ; 6. Shipment:in bulk or by containers; 7. Application: It can be used with anchor plate, spiral bar and other anchorage system together; 8. Origin:China (mainland). 2.Model Type For PC Strand: M13 applies to 12.7mm, 12.5mm & 12.9mm PC strand M15 applies to 15.2 or 15.24mm, 15.7mm PC strand M18 applies to 17.8mm to 18.5mm PC strand M22 applies to 21.6 to 22mm PC strand M11 applies to 10.8mm PC strand M10 applies to 9.3mm, 9.53mm PC strand; M7, M6, M5 apply to 7.0mm, 6.0mm, 5.0mm spiral ribbed PC Strand 3.Application For Prestressing Concrete: 1. prestressing methods can be used efficiently in all applications of Building and Civil Engineering works including Building floor slabs Bridge girders Tanks and Silos many other applications 2. post tensioned bridges are commonly used in bridge construction as well as other civil Engineering structures such as Silo, Water tank etc. The systems are normally adopted for bonded tendons. The tendons consist of a bundle of strand with a nominal diameter of 0.5" (12.7 mm.) or 0.6" (15.2 mm.). 3. The strands are individually gripped in one anchorage unit and transmits their prestressing force by means of anchor plate casting unit type M. 4. For each anchor size a special spiral reinforcement is provided at the anchor plate casting to give adequate splitting reinforcement for burstling stresses developed at the anchorage zone. 5. The strands in tendon are stressed simultaneously by means of a multi strand stressing jack from capacity 1,100 KN up to 5,000 KN. In case of small size tendon unit such as type M405 the strands can also be stressed individually by means of mono jack. 6.To ensure corrosion protection and to give adequate bond strength, the tendons are filled with suitable cement grout mix after complete stressing of the strands.
Product Name plastic drawer mould Product material PP Core& Cavity Steel 2738 Steel hardness HRC35-38 Mould Standard DME Cavity Number 1 Injection System Pin point gate Ejector System ejector pin Cycle Time 45s Tooling lead time 60 days Mould life 500, 000shots Quality assurance ISO9001 Our Advantage 1. High quality 2. Reasonable price 3. On time delivery 4. Good After-sale service 5. Strict quality control 6. All the mould are automotic. Offer you In-time response on letters,telephone calls or fax In-time supply the quotation and mould designs In-time communication on the technical points In-time sending pictures for the mould machining progress and mould finishing schedule In-time mould test and sample delivery In-time mould delivery. For more information please contact us.
Refrigeration cold room and freezer /fruit storage freezer room Specifications of Walk in freezer, and can do any size and temperature according to the customers' requirements. Detailed Product Description Polyurehtane insulated panel, customized size Standard hinged door , sliding door,swing door. Monoblock refrigeration unit Use 100%polyurethane insulation panel, density about 44~46kg/m3, with gasket, with flame retardant. Features of fruit storage freezer room 1. Panel thickness: 50, 75, 100, 150 ,200 mm 2. Cooler panel types: polyurethane cooler panel polystyrene cooler panel asbestos cooler panel 3. Panel material: knurling aluminum cold steel panel stainless steel 4. Door types of cold room: Auto closing door, Sliding door, Double acting door Flat barn door Standard protruding barn door. 5. Refrigeration unit: Bizer air cooling semi-hermetic unit Bizer water cooling semi-hermetic unit French Tecumseh unit Hanbell screw unit Copeland unit and Maneurop unit 6. Control system: EVERY CONTRL center controller configured with Schneider AC contactor for cold storage. 7. Refrigerants: R407c, R22, R717, R134a, R404a 8. Expansion valve: Danfoss Application: Food(meat, vegetable, fruit, dairy, drink), medicine, chemical, electronics, etc. -- materials: Polyurethane and metal sheet. Metal sheet: It is can be with painted steel sheet and stainless steel sheet for choice. -- with electric heating wire around doorframe to void icing. -- safe doorknob inside. -- positive plastic seal fixed to door to avoid cooling air losses. Quick-freezing storage/ room storage room sanwich panel Commercial cold storage Cold warehouse Cold Storage For Cooling foods vegetable ftuits cold room for fish farm
Refrigeration cold room and freezer /fruit storage freezer room Specifications of Walk in freezer, and can do any size and temperature according to the customers' requirements. Detailed Product Description Polyurehtane insulated panel, customized size Standard hinged door , sliding door,swing door. Monoblock refrigeration unit Use 100%polyurethane insulation panel, density about 44~46kg/m3, with gasket, with flame retardant. Features of fruit storage freezer room 1. Panel thickness: 50, 75, 100, 150 ,200 mm 2. Cooler panel types: polyurethane cooler panel polystyrene cooler panel asbestos cooler panel 3. Panel material: knurling aluminum cold steel panel stainless steel 4. Door types of cold room: Auto closing door, Sliding door, Double acting door Flat barn door Standard protruding barn door. 5. Refrigeration unit: Bizer air cooling semi-hermetic unit Bizer water cooling semi-hermetic unit French Tecumseh unit Hanbell screw unit Copeland unit and Maneurop unit 6. Control system: EVERY CONTRL center controller configured with Schneider AC contactor for cold storage. 7. Refrigerants: R407c, R22, R717, R134a, R404a 8. Expansion valve: Danfoss Application: Food(meat, vegetable, fruit, dairy, drink), medicine, chemical, electronics, etc. -- materials: Polyurethane and metal sheet. Metal sheet: It is can be with painted steel sheet and stainless steel sheet for choice. -- with electric heating wire around doorframe to void icing. -- safe doorknob inside. -- positive plastic seal fixed to door to avoid cooling air losses. Quick-freezing storage/ room storage room sanwich panel Commercial cold storage Cold warehouse Cold Storage For Cooling foods vegetable ftuits cold room for fish farm
Refrigeration cold room and freezer /fruit storage freezer room Specifications of Walk in freezer, and can do any size and temperature according to the customers' requirements. Detailed Product Description Polyurehtane insulated panel, customized size Standard hinged door , sliding door,swing door. Monoblock refrigeration unit Use 100%polyurethane insulation panel, density about 44~46kg/m3, with gasket, with flame retardant. Features of fruit storage freezer room 1. Panel thickness: 50, 75, 100, 150 ,200 mm 2. Cooler panel types: polyurethane cooler panel polystyrene cooler panel asbestos cooler panel 3. Panel material: knurling aluminum cold steel panel stainless steel 4. Door types of cold room: Auto closing door, Sliding door, Double acting door Flat barn door Standard protruding barn door. 5. Refrigeration unit: Bizer air cooling semi-hermetic unit Bizer water cooling semi-hermetic unit French Tecumseh unit Hanbell screw unit Copeland unit and Maneurop unit 6. Control system: EVERY CONTRL center controller configured with Schneider AC contactor for cold storage. 7. Refrigerants: R407c, R22, R717, R134a, R404a 8. Expansion valve: Danfoss Application: Food(meat, vegetable, fruit, dairy, drink), medicine, chemical, electronics, etc. -- materials: Polyurethane and metal sheet. Metal sheet: It is can be with painted steel sheet and stainless steel sheet for choice. -- with electric heating wire around doorframe to void icing. -- safe doorknob inside. -- positive plastic seal fixed to door to avoid cooling air losses. Quick-freezing storage/ room storage room sanwich panel Commercial cold storage Cold warehouse Cold Storage For Cooling foods vegetable ftuits cold room for fish farm
Name: Colored PET Glitter Powder Part No.: CL00 ? CL058 Color: Gold, Silver, Red, Green, Orange¦ Raw Material PET Thickness: 8um, 25um, 38um, 50um etc. Available Size: /4�? /500� Temperature Resistance: 80 degrees Solvent Resistance: No Technology: Electrical Coating and Precision Cut Shape: Hex, Strip, Heart, Square, Prismatic, Star, Moon etc. Character: Eco-friendly, Non-toxic Certificate: CPSIA, LHAMA, MSDS, EN7 Original Place: China HS Code: 32290000 Application: Plastic Injection, Textile, Glass Art and Craft, Wallpaper, Greeting Card, Christmas Decoration, Cosmetics etc. Lead Time: About 5-8 days
Solar Water Heater, Solar Lights, Solar Pump, RO Systems, LED Lights, Solar Power Plant, Table Top Scale, Platform Scale, Bench Top Scale, Heavy Platform Scale, Price Computing Scale, Home cum Personal Scale, Jewellery Scale, Digital and Electronic Weighing Scales, laboratory balances, industrial scales and Retail weighing machines.
Product Description: Wire Diameter 1-100 mm Out Side Diameter Up to 500mm Free Length Up to 1200mm Number of Turns As required Surface Treatment Dipping paint, Shot peen, Zinc plating, Nickel plating, Chrome plating, Gold plating, Copper plating,Spray-paint. E-Coating, Powder painting and oil tempered. Application Railway vehicles, Wagons, Freight cars, Metallurgical machinery, Agricultural machinery, Automobile Machinery, Cranes, Bogies, Mine locomotives, Heavy duty trucks, Engineer vehicle bogies, Mine tractors, Trailers, Motor Vehicles. MOQ 100pcs, any small trial order is welcome. Package Inner plastic bags and outer cartons or wooden case, Or as per customers' requirements. Delivery Time 15-30 workdays based on MOQ. Payment Term 30% deposit, the balance should be paid before shipping We can design and manufacture any springs for you as long as you can offer the following information requirement: Material Wire diameter Surface treatment Inner diameter and outer diameter (ID and OD) Free length and work length Total coils and active coils Application (For which kind of transportation car) A technical drawing is the best
2-Chlorobenzonitrile applies for dye, medicine and other fine chemical intermediates.
