TP 310, Stainless steel 310 is a combination, of good strength and corrosion, resistance in temperatures up to, 1149°C (2100°F). The high, chromium and nickel contents, give the steel excellent oxidation, resistance. 310 is also very ductile,, and has good weldability, enabling its widespread usage in, many applications. Stainless steel, 310S contains less carbon than, 310 to minimize carbide, precipitation.
Type 310S may be, used in atmospheres containing, moderate amounts of sulfur, because of high chromium and, medium nickel contents. It is not, usually recommended for liquid, quenching., Main Application: paper, production plant, heat recuperator, tubing, combustion chambers,, molten salt applications, thermo, wells, equipment to handle, sulfite liquors and gas turbines,, furnace parts, oil burner parts,, welding filler wire and electrodes.
TP 316 TP 316Ti, Stainless steel 316 is an austenitic, grade second only to 304 in, commercial importance. Type 316, contains molybdenum that gives, it improved corrosion resistance,, increased strength at elevated, temperatures and resistance to, pitting from chloride ion solutions., It has good resistance to oxidation, up to 900°C (1650°F). Type 316, has variety of uses especially in, marine applications due to the, materials high corrosion resistance., Type 316H has carbon content, between 0.04% - 0.10%.
This, makes the steel more suitable for, use in applications where elevated, temperatures are present. 316H, is sometimes used for structural, and pressure containing, applications at temperatures, above about 500°C (900°F)., Type 316L has the same,
TP 304, Stainless steel 304 is an, austenitic grade that can be, severely deep drawn. This, property has resulted in 304, being the dominant grade used, in applications like sinks and, saucepans.
Type 304L is, probably the world’s most, common stainless steel. The L, stands for Low and refers to the, carbon content. 0.035% is the, maximum allowable carbon, content in 304L. Low carbon, content ensures better ductility, and avoids the intergranular, corrosion. Type 304H is austenitic, chromium-nickel steel alloy with, high carbon content, which, delivers increased, tensile and, yield strength.
The H in 304H, stands for High carbon content., 304H must contain carbon, between 0.04% - 0.10%., It is used where elevated, temperatures are present., Main Application: pressure vessels,, oil refining, heat exchangers,, pipelines and condensers,, chemical equipment, brewery,, dairy, food and pharmaceutical, production equipment.
we are regular supply Stainless Steel Scraps 304/316/430.
Now we have available stocks for shipped. if you interested to buy now this time feel free contact us.
Payment T/T & at side L/C
Main steel tube grade: a53-a, a53-b etc. Other grade can also be provided after consulting with acustomers.
Permissible variations in weight and dimensions:
Weight -- the weight of the pipe as calculated from the relevant equation in asme b36.10m shall not vary by more than 10%.
Diameter -- for pipe nps 1 1/2(dn40) and under, the outside diameter at any point shall not vary more than 1/64 in.(0.4mm) from the standard specified. For pipe nps 2 (dn 50) and over, the outside diamter shall not vary more than 1% from the standard specified.
Thickness -- the minimum wall thickness at any point shall not more than 12.5% under the nominal wall thickness specified. The minimum wall thickness on inspection shall comform to the requirement.
ZLYJ Series Gearboxes for Plastic and Rubber Single Screw Rod Extruder is a kind of special reducer researched
and developed by importind the most advanced technology of the hard teeth-surface in the world. For recent ten years, they
are widely used in top and middle grade plastic, rubber and chemical fiber extruders, sell well in the country and are exported
abroad. With a higher reputation in the industry, it has features as follows:
1. The whole machine looks beautiful and liberal, and can be used both vertically and horizontally. It can suit multiple
requirement of assembling.
2. The gear data and box structure are optimally designed by the computer. The gears are made of top grade low carbon
alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the
teeth surface is 54 - 62 HRC. The gear pair has stable running, low noisy and has high driving efficiency.
3. The assembling connector has the precision of radial run-out and end face run-out at international level, and can be
easily connected with screw rod of the machine barrel.
4. The bearing structure of the output shaft has a unique style, which can effectively prolong service life of the bearings.
5. All standard parts such as bearing, oil seal, lubricant oil pump etc. are all top quality products selected from domestic
famous manufacturers. They can be also selected from imported products as per requirement of customer.
Duplex steel:
Astm / asme sa 182 f 44 , f 45 , f51 , f 53 , f 55 , f 60 , f 61.
Nickel alloy:
Astm / asme sb 564 uns 2200 ( nickel 200 ) , uns 4400 (monel 400 ) , , uns 8825 inconel (825) , uns 6600 (inconel 600 ) , uns 6601 ( inconel 601 ) , uns 6625 (inconel 625) , uns 10276 ( hastelloy c 276 )
Astm / asme sb 160 uns 2201 (nickel 201 )
Astm / asme sb 472 uns 8020 ( alloy 20 / 20 cb 3 )
Copper alloy:
Astm / asme sb 61 uns no. C 92200 & astm / asme sb 62 uns no. C 83600.
Astm / asme sb 151 uns no. 70600 , 71500 , c 70600 ( cu -ni- 90/10) , c 71500 ( cu -ni- 70/30)
Astm / asme sb 152 uns no c 10100 , c 10200 , c 10300 , c 10800 , c 12000, c 12200.
Manufacturer & exporter of stainless steel round/square/hex/wire/forged/bright/black in grade:201;202;303;304/l;316/l;317/l;309;310;321; 347; 904l;410;420;430 etc....
Sizes:
1)wire:0.1mm dia to 8mm dia.
2)round/suare/hex bar:
Rolled:10mm dia to 200mm dia(black/bright) &
Forged:100mm dia to 400mm dia.
Quality: iso 9001:2008 certified company in exports.
Weight: we are giving approx weight in our quotation & exact weight at the time of shipment.Ther is no compromise in weight & quality.
Packing:as per the seaworthy export packing.
Type:sorf, blrf, wnrf, solj, table:d, e, f & class:150# to 3000#.
Stainless steel: astm a 182 f 201; 202; 303; 304/l/h; 316/l/h; 317/l/h; 309; 310; 321; 347; 904l etc...
Quality: ISO 9001:2008 certified company in exports.
Packing: export seaworthy packing first in plastic bags & than in export quality wooden boxs with thermocol.
525525 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
