Product name stainless steel plate Grade (200 series& 300 series& 400 series..etc) 201,202,301,303,304,304L,305,316,316L,321,410,416,420,430... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc Standard GB, JIS, ASTM, AISI Surface pickled,bright or black Thickness sheets:4mm,range from 4-60mm or above. Width 10mm-3000mm Length AS PER CUSTOMER Usage 1.Widely used in the areas such as stainless steel fasteners,chains.kitchen and sanitarywares,furniture handles,handrail,electroplating and electrolyzing pendants,food,electro,petroleum,construction and decoration,etc. 2.electronic products parts,medical appliances,springs,bus inside and outside packing and building,street lamp posts,etc.decoration materials and outdoor publicity billboard.used for the products which have the anti-stress corrosion requirement.electron products,table-wares,bolts,nuts,screen mesh, combustor and so on. Surface finish NO.1 Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. NO.2D Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. NO.2B The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surface treament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. NO.3 Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. NO.4 Polished with abrasive belt of grit #150-#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud building inner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. #320 Polished with abrasive belt of grit #320, have better brightness with discontinuous coarse stria, but thinner NO.3, are used as bathtub building inner and external ornaments electrical appliances, kitchen utensils and food lprocessing equipment etc. HL Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. BA Cold rolled, bright an nealed and skin-passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.
1) Grade: 201,202,301,304,304L,310S,316,316L,410,430,etc. 2) Standard: AISI, ASTM, DIN, GB, JIS, SUS 3) Dimension: 2.5*2.5mm-200*200mm 4) Length: 2-6m or as customer decided 5) Condition: Hot Rolled & Pickled, Hot Rolled Black Bar,Cold Drawn, 6) Packing: Nylon bag or according to client's requirement Product Application: With bright surface, slight magnetism and no cracks on forming, is widely used in bicycle fittings, kitchen and sanitation tools, goods shelf, pet cages, gill racks, decorative handles and baskets, food and medical machinery accesses, etc.
Features: Od:6mm-820mm;1/4¼32 Thickness:1mm-50mm Length:1m-12m Standards:astm a269 a312 , a213, gb/14976-2002, gb/13296-91 etc Materials:tp304 tp316 tp304l tp310s Surface:primary colour, malt, mirror face, wire drawing Productions ruquiremen:cold drawing, precision rolling Packing: plastic bags for each piece then packed in seaworthy Payment:30%deposite before manfacture , balance before shipment 10. Delivery date: min.25 days.
Features: Od:6mm-820mm;1/4í¦í¬32í¦ Thickness:1mm-50mm Length:1m-12m Standards:astm a269 a312 , a213, gb/14976-2002, gb/13296-91 etc Materials:tp304 tp316 tp304l tp310s Surface:primary colour, malt, mirror face, wire drawing Productions ruquiremen:cold drawing, precision rolling Packing: plastic bags for each piece then packed in seaworthy Payment:30%deposite before manfacture , balance before shipment Certificate: iso 9001:2000, ped by english lloyd's register, tuv 10. Delivery date: min.25 days
1> grade: 304, 304l, 304h, 310s, 316, 316l, 316ti, 317, 317l, 321, 321h and 347, 347h, uns31803, uns32750, uns32760, 2205 and 904l, ......1.4301, 1.4306, 1.4845, 1.4401, 1.4404, 1.4436, 1.4541, 1.4550, 1.4539, 1.4571, ......08x18h10, 03x18h11, 12x18h10t, 10x17h13m3t, 03x17h14m3t, 20x23h18, 20x23h13, 06xh28mt, 2> standards: din 17458, en10045, en10305, en10216, sa/astm a312, sa/astm a213, sa/astm a269, sa/astm a511, sa/astm a789, sa/astm a790, sa/astm a268, sa/astm a450/a450m, jis g3459, jis g3463, din 17456 , gb/t14975-2002, gb/t14976-2002, gb13296, gb5310, etc. 3> o.D. Sizes range: 5mm------650mm. 4> wall thickness:0.8mm-------48mm. 5> max. Length under 17 meters. 6>.Capillary tube:o.D(0.5-----19.05mm), w.T(0.05----1.5mm), length max.:100 meters/pcstainless steel pipe, stainless steel tube, welded steel pipe, welded steel tube, seamless steel pipe, pipe, tube, duplex steel pipe, duplex steel tube, capillary steel tube, duplex steel pipe (uns31803), duplex steel pipe (uns32750), duplex steel pipe (uns32760), duplex steel pipe (2205), duplex steel pipe (2507), duplex steel pipe (2520), duplex steel pipe (1.4462), duplex steel pipe (1.4410), duplex steel pipe (1.4501) , austenitic steel pipe, austenitic steel tube, thick wall thickness pipe, thick wall thickness tube, thin wall thickness pipe, thin wall thickness tube, capillary steel tube, precise steel pipe, precise steel tube, cold roll steel pipe, cold roll steel tube, cold draw steel pipe, cold draw steel tube, square steel pipe, square steel tube, stainless steel pipe, seamless steel tube, welded steel pipe, welded steel tube, duplex steel pipe , double metal composite tube.
1> grade: 304, 304l, 304h, 310s, 316, 316l, 316ti, 317, 317l, 321, 321h and 347, 347h, uns31803, uns32750, uns32760, 2205 and 904l, ......1.4301, 1.4306, 1.4845, 1.4401, 1.4404, 1.4436, 1.4541, 1.4550, 1.4539, 1.4571, ......08x18h10, 03x18h11, 12x18h10t, 10x17h13m3t, 03x17h14m3t, 20x23h18, 20x23h13, 06xh28mt, 2> standards: din 17458, en10045, en10305, en10216, sa/astm a312, sa/astm a213, sa/astm a269, sa/astm a511, sa/astm a789, sa/astm a790, sa/astm a268, sa/astm a450/a450m, jis g3459, jis g3463, din 17456 , gb/t14975-2002, gb/t14976-2002, gb13296, gb5310, etc. 3> o.D. Sizes range: 5mm------650mm. 4> wall thickness:0.8mm-------48mm 5> max. Length under 17 meters. 6>.Capillary tube:o.D(0.5-----19.05mm), w.T(0.05----1.5mm), length max.:100 meters/pcstainless steel pipe, stainless steel tube, welded steel pipe, welded steel tube, seamless steel pipe, pipe, tube, duplex steel pipe, duplex steel tube, capillary steel tube, duplex steel pipe (uns31803), duplex steel pipe (uns32750), duplex steel pipe (uns32760), duplex steel pipe (2205), duplex steel pipe (2507), duplex steel pipe (2520).
610*6.35
Name: stainless steel seamless pipe Uses: shoulder-fire barrel Material: S30408 Specifications: 202mm * 3mm Agreement calls for: 1. Inner diameter smooth surface tolerance shall not exceed � 1.2mm outer mouth wrapped round 2-0.3mm, +0 mm of wall thickness tolerance Client: Beijing in an army Manufacturer: Zhejiang Hongsheng Special Steel Co., Ltd.
Stainless steel coil manufacturing details: Process: cold drawn cold-formed Specifications: 12mm-108mm * 2mm-10mm (OD * wall thickness) Material: 304 304L 321 316L 316Ti 310S Stainless coil purposes: Industrial stainless steel coil: heat exchangers, boilers, petroleum, chemicals, fertilizer, chemical fiber, pharmaceutical, nuclear power. Fluid with a stainless steel coil: drinks, beer, milk, water systems, medical equipment and other. Mechanical structure with stainless steel coil: dyeing, printing, textile machinery, medical equipment, kitchen equipment, automobile and ship fittings, construction and decoration, etc.
Production: Formed (small caliber) Specifications: 12mm-60mm * 2mm-8mm (OD * wall thickness) 2 heat simmer bending (large diameter) Size: 76mm-426mm * 4mm-20mm Material : 304 321 304L 347H 316L 310S 317L 316Ti 2205 S31803 The Remarks: stainless steel pipe will produce a slight residual stress in cold-formed into coils or bends process. If the customer needs to do to deal with stress, described in detail in the consultation.
Stainless steel pipe technology: Formed (small caliber) Specifications: 12mm-60mm * 2mm-8mm (OD * wall thickness) 2 heat simmer bending (large diameter) Size: 76mm-426mm * 4mm-20mm Material : 304 321 304L 347H 316L 310S 317L 316Ti 2205 S31803 The Remarks: stainless steel pipe will produce a slight residual stress in cold-formed into coils or bends process.If the customer needs to do to deal with stress, described in detail in the consultation.
Name: large diameter Thin-walled stainless steel pipes Production process: cold drawn Material :TP316L Standard:ASTM A312 Size: 609.6mm * 6.35mm * 6000mm Billet: Walsin Client: Italian Fiat Group Manufacturer: Zhejiang Hongsheng Special Steel Co., Ltd. Main purposes: biological engineering, desalination equipment manufacturing, paper making, shipbuilding, petrochemical pipelines. We produce large diameter Thin-walled stainless steel pipes common specifications: 219.1 mm * 3.76mm, 273.1mm * 4.19mm, 323.9mm * 4.57mm, 355.6 mm * 4.78mm, 406.4mm * 4.78mm, 457.2 mm * 4.78mm, 508mm * 5.54mm, 558.8 mm * 5.54mm, 609.6 mm * 6.35mm, 660.4mm * 7.92mm, 711.2mm * 7.92mm more commonly used in the specifications of the American standard, some standard specifications of the Japanese standard of GB have mold.Such as non-standard, custom mold production.Such large diameter Thin-walled stainless steel pipes in early 2009, we started to develop large volume production starting with the end of the year, 11-year company manufacturing grades: 0Cr18Ni9 Specifications: 630mm * 6.5mm large diameter thin-walled stainless steel pipe (seamless Production), the national oil drilling and refining equipment of Quality Supervision and Inspection Center of Special Equipment type test certificate number: TSX71004320110063, the current in large diameter thin-walled stainless steel pipe (seamless) are already quite mature, especially in outer diameter and far more than the standard control of wall thickness tolerance GB GB | T14976, 14975,13296, American Standard ASTM A312 A213, the European standard EN-10216-05 D3 \ T3 standards.
Name: stainless steel heat exchanger Uses: salinization equipment Material: 316L Client: shares of Yunnan Salt Manufacturer: Zhejiang Hongsheng Special Steel Co., Ltd.
Item: Stainless steel plate Standard: ASTM,AISI,SUS,JIS,EN,DIN,BS,GB Material: 201,202,304,304L,309S,310S,316,316L,316Ti,317L,321,347H, 409,409L,410,420,430 Finish(Surface): NO.1, NO.2D, NO.2B, BA,NO.3, NO.4,NO.240,NO.400,Hairline,NO.8, Exported Area: USA,UAE,Europe,Asia,Middle East,Africa,South America Thickness: Form 0.4mm to 100mm Width :1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2200mm or we can also help the size as you require Length: 2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm or we can make the length as you require Application: Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries, war and electricity industries, food processing and medical industry, boiler heatexchanger, machinery and hardware fields. Stainless steel sheet can be made according to the customers requirements. Packaging Detail: Standard seaworthy package(wooden boxes package,pvc package, and other package) Delivery Time: According to your size and quantity or as customers require Payment Term: T/T ,L/C
Product spedcifications and different model no - 201 304 mirror ba stock stainless steel plate 1.4301 2b stainless steel plate 316 jiangsu steel group 2b stainless steel plate 430 2b ba hl stainless steel plate from 440b 440c 440a stainless steel plate 309 309s surface stainless steel plate 309 309s surface stainless steel plate 1.4310 size factory stainless steel plate 1.4372 polished stainless steel plate 1.4401 no.4 pe foile stainless steel plate 1.4541 1219*2438 cheapest stainless steel plate 1.4512 no.1 sample stainless steel plate Product name Stainless steel plate Grade (200 series& 300 series& 400 series..Etc) 201, 202, 301, 303, 304, 304l, 305, 316, 316l, 321, 410, 416, 420, 430... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597, 1.4541, etc Standard Gb, jis, astm, aisi Surface Pickled, bright or black Thickness Sheets:4mm, range from 4-60mm or above. Width 10mm-3000mm Length As per customer Usage 1.Widely used in the areas such as stainless steel fasteners, chains.Kitchen and sanitarywares, furniture handles, handrail, electroplating and electrolyzing pendants, food, electro, petroleum, construction anddecoration, etc. 2.Electronic products parts, medical appliances, springs, bus inside and outside packing and building, street lamp posts, etc.Decoration materials and outdoor publicity billboard.Used for the products which have the anti-stress corrosion requirement.Electron products, table-wares, bolts, nuts, screen mesh, combustor and so on. Condition of delivery Austenite in solution, ferrite in anneal or in accordance with client's detailed requirement Moq 1 metric ton Price terms Cif or fob shanghai Payment terms L/c or t/t Supply ability25 metric tons per day Delivery detail7-30 days, according to the quantity. Packaging detail full wrap by plastic packing-cloth
Material 201 202 301 302 303 304 304l 309 310 321 316 316l 316ti 410 420 430 2520 2014 Standard category Gb aisi astm din jis ks bs Surface Hot rolled cold draw pickled bar etc. Packing Standard export packing or according to customer's request Payment Tt(30% in advanced, 70% before shipment) or 100% l/c at sight Delivery time Within 25 days after receive 30% advance or within 25 days after l/c issuing date Surface Bright, pickled, black Technique Forged/hot rolled/cold drawn/peeled Category 1.Round bar 1)hot rolled black bar: (5-400)x6000mm or according to your requirement. 2)acid round bar: (5-400)x6000mm or according to your requirement. 3)cold drawn bright bar: (1-20)x6000mm or according to your requirement. 4)polishing round bar: (5-400)x6000mm or according to your requests. Diameterâ± H9 tolerance can reach the industry standard Quality Our production equipment 24 hours of continuous temperature work, to ensure the unity of the product roundness, elongation, tensile strength and yield strength. Welcome customers to our company to detect the products before shipment. For the customers who are not inconvenient, quality assurance can be laid down in the contract, we will take charge of the returning and shipping fee if there is any problems of the product quality, so it will dismiss any of your worry about our products. Package Standard seaworthy packing(plastic&wooden) or according to the customer's requests Delivery time 7-20days, according to the quantity Productivity 1500 tons/month Remarks Oem/sample/mixed item/factory visit are welcome
Instructions: 1) grade: 301, 302, 304, 304l, 316, 316l, 321 etc., 2) standard: aisi, astm, din, gb, jis, sus 3) diameter: 1.0mm-8.0mm 4) delivery: within 30 days 5) surface finish: bright, soft, hard, matt. 6) certification: iso9001:2008 7) packing: woven bag, coil, or as your requirement 8) application: tie wire, pins, lashing, forming wire, filters, gaskets, elevators, safety wire, shaped and flat wire, conveyors, jewelry, springs, brush welding, electrical, wire line, craft and many more applications.
Material 201 202 301 302 303 304 304l 309 310 321 316 316l 316ti 410 420 430 2520 2014 Standard category Gb aisi astm din jis ks bs Surface Hot rolled cold draw pickled bar etc. Surface Bright, pickled, black Technique Forged/hot rolled/cold drawn/peeled Category 1. Flat bar 1)hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 2)cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. Quality Our production equipment 24 hours of continuous temperature work, to ensure the unity of the product roundness, elongation, tensile strength and yield strength. Welcome customers to our company to detect the products before shipment. For the customers who are not inconvenient, quality assurance can be laid down in the contract, we will take charge of the returning and shipping fee if there is any problems of the product quality, so it will dismiss any of your worry about our products. Package Standard seaworthy packing(plastic&wooden) or according to the customer's requests Delivery time 7-20days, according to the quantity Productivity 1500 tons/month Remarks Oem/sample/mixed item/factory visit are welcome
TP 310, Stainless steel 310 is a combination, of good strength and corrosion, resistance in temperatures up to, 1149°C (2100°F). The high, chromium and nickel contents, give the steel excellent oxidation, resistance. 310 is also very ductile,, and has good weldability, enabling its widespread usage in, many applications. Stainless steel, 310S contains less carbon than, 310 to minimize carbide, precipitation. Type 310S may be, used in atmospheres containing, moderate amounts of sulfur, because of high chromium and, medium nickel contents. It is not, usually recommended for liquid, quenching., Main Application: paper, production plant, heat recuperator, tubing, combustion chambers,, molten salt applications, thermo, wells, equipment to handle, sulfite liquors and gas turbines,, furnace parts, oil burner parts,, welding filler wire and electrodes.
TP 316 TP 316Ti, Stainless steel 316 is an austenitic, grade second only to 304 in, commercial importance. Type 316, contains molybdenum that gives, it improved corrosion resistance,, increased strength at elevated, temperatures and resistance to, pitting from chloride ion solutions., It has good resistance to oxidation, up to 900°C (1650°F). Type 316, has variety of uses especially in, marine applications due to the, materials high corrosion resistance., Type 316H has carbon content, between 0.04% - 0.10%. This, makes the steel more suitable for, use in applications where elevated, temperatures are present. 316H, is sometimes used for structural, and pressure containing, applications at temperatures, above about 500°C (900°F)., Type 316L has the same,
