Wooden puzzle.
RC toys.
Toys.
We sell various lego toys Please contact us for more information
Features: Chassis: Nylon composite construction Drive: Four wheel with lightweight extruded aluminum shaft Radio: Traxxas TQ 2.4GHz High Output Traxxas Link with mini receiver Electronic Speed Control: Traxxas Velineon VXL 3S Motor: Traxxas Velineon 3500 with ultra high temperature Neodymium magnets and high speed ball bearings Spur Gear: 54 tooth, 0.8 module 32 pitch Pinion Gear: 13 tooth Battery: Traxxas Power Cell 8.4V 3000mAh 7-cell with high-current connector Battery Charger: Body: Painted and trimmed Bumpers: Front and rear, composite construction Shocks: Traxxas Ultra oil filled with high-volume body, silicone bladders, dual X-ring seals and progrssive springs Suspension: C-hub design Transmission: Ball bearing equipped with adjustable Torque-Control slipper clutch with finned aluminum alloy pressure plates Differentials: Revo-spec sealed silicone filled planetary gear type Ball Bearings: Rubber sealed Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Tires: Mud-Terrain, with foam inserts 1.7" (43mm) wide, 4.3" (109mm) diameter Wheels: Beadlock style split spoke with chrome center and color molded outer rim to simulate beadlock, 12mm hex Steering: Dual bellcrank pivoting on rubber sealed bearings with integrated cam-type servo saver, waterproof digital high- torque (125 oz-in) servo. INCLUDES: Traxxas Slash 4X4 Short Course Race Truck with 2.4GHz radio system, brushless ESC and motor, body, 7-cell 3000mAh NiMH battery, AC powered charger, decals and illustrated instruction manual.
Features: Chassis: 6061-T6 aluminum, .16" (4mm) thick, blue in color, heavy duty braces Drive: Four wheel shaft driven with Revo spec driveline including sealed driveshafts, pivot balls and axle carrier Wheelie Bar: 4 snap-in adjustment positions to control degree of wheelie action, easily removable if additional control isn't needed Radio: Traxxas TQ 2.4GHz Direct Sequence Spread Spectrum (DSSS) programmable system with Traxxas Link automatic model recognition that allows up to 20 Traxxas Link receivers and transmitters to be bound, transmitter automatically recalls settings for any previously bound receiver Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carburetor, 12mm diameter IPS crankshaft, high volume dual stage air filter Starter: EZ-Start electric starting system with Traxxas's exclusive Smart-Start technology that monitors critical starting functions, sensing and diagnosing potential problems for easy starting every time Battery: Traxxas Power Cell Battery Charger: AC powered Exhaust: Maxx Resonator dyno tuned dual chamber polished tuned pipe Brake: Semi metallic, giant 1.6" (42mm) diameter Tires: 6.3" (160mm) outer diameter, 3.8" (96.5mm) inner diameter all terrain Maxx Wheels: Hurricane chrome wheels 3.8" (96.5mm) diameter, 2.75" (70mm) wide, 14mm hex size Transmission: Revo-Spec forward only two speed autoshifting with skid plate, optional reverse kit sold separately Differential: Revo-Spec sealed front and rear Ball Bearings: Full set, rubber sealed Fuel Tank: 4.2oz (125cc) Body: Trimmed and painted Shocks: Eight oil-filled Ultra with rubber pressure badders and double O-ring seals, up to ten shock mounting positions, nearly 4" (102mm) travel Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Suspension: Sealed pivot ball WideMaxx independent Steering: Heavy duty bellcrank steering with integrated servo saver Skid Plates: Heavy-duty plastic, front and rear. Includes: New T-Maxx RTR 3.3 truck, TRX 3.3 engine, EZ Start electric starter, EZ Start battery, charger, fuel bottle, extra glow plug, metric hex hardware, air filter, two decal sheets setup DVD, antenna tube, painted body, illustrated instruction manual and 2.4GHz radio system.
FEATURES: Chassis: 0.08" (2mm) thick FRP main frame with duralumin plate for added strenth and flexibility Drive: Rear wheel Motor: 540 type Electronic Speed Control: Tamiya TEU-104BK with reverse Transmission: Single-speed Gearbox: Transparent plastic, fully enclosed, die cast metal and clear resin components Body: Polystyrene, trimmed and molded in white Bumper: Front reinforced resin with integrated metal bars Shocks: Oil filled Ball Bearings: Full set Tires: Front ribbed 2.7" (69mm) diameter, 0.71" (18mm) wide Rear paddle 3.1" (79.5mm) diameter, 1.6" (40mm) wide Wheels: Three-piece center lock, molded in white Suspension: Front double trailing arm, die cast front and rear arms and metal uprights, swing axle rear suspension with metal torsion bars Camber: Non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bellcrank type with servo saver. Includes: Sand Scorcher Buggy Kit, 540 motor, white plastic body, tires, wheels oil-filled shocks, decals, 15T pinion gear, instruction manual, 70 tooth spur gear, driver bust and ESC.
Align T-REX 600 Nitro Pro 50size RC Helicopter Super Plus Version 1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal. 2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. 3.+-14? collective pitch is possible for extreme 3D performance. 4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM. 5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG. 6.Pitch and All servos moved forward for CG. 7.Battery tray designed for easy and clean radio gear installation. 8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying. 9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM. 10.Heavy duty tail with thrust bearings. 11.95mm Tail Blades. 12.Torque Tube driven tail for incredible 50 sized performance. 13.Rigid frame design that can also handle hard crashes without damage. 14.Carbon Fiber frames, fins and boom supports. 15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. 16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. 17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs). 18.Fuel Tank designed so that no additional header tank is required. 19.New main gear with one-way bearing design for high torque. 20.New flybar paddles feature light weight and sports. 21.New flybar control set design. 22.New tail boom supports. Data Sheet - Length:1160mm - Height:410mm - Main Blade Length:600mm - Main Rotor Diameter:1350mm - Tail Rotor Diameter:240mm - Engine Pinion Gear:20T - Autorotation Tail Drive Gear:180T - Drive Gear Ratio:8.1:1:4.5(E:M:T) - Flying Weight:Approx. 3200g Items Included : Model - T-REX 600 Nitro Pro?50size RC Helicopter - T-rex 600 Nitro Pro Landing Skid - T-rex 600 Nitro Pro Canopy - T-rex 600 Nitro Pro Manual Motor - OS Engine 50SX-H Ring Hyper Heli Engine - Glow Plug for 600 N ESC - B6T 2 In 1 Voltage Regulator HE50H10 Servos - Futaba BLS251 Digital Servo - Futaba S9155 Servo x 3 - Futaba S3152 Servo Gyro - Futaba GY611 SMM Rate Gyro Radio - Futaba 9C Super Transmitter - Futaba PCM R149DP 9CH Receiver Battery & Charger - 600 Carbon Night Blade Charger H60130 Bonus Parts - Fuel tank HN6009 - 600N Fiberglass Canopy HN6035 - Mavrikk PRO Series Carbon Fiber 600mm Main Blades - Trex600 EL Flashing Sticker - 50 High Performance Muffler HE50H08 - 600 Carbon Fiber Night Blades/3K H60131 - Flying Cap BG61548 - Main Blade Holder/New (H60145) - Radio Sling KX150006 - Flying T-shirt (White) BG61557 - Trex600 EL Flashing Sticker with tail boom Metal Parts - Align Metal Main Rotor Holder - Align Metal Flybar Seesaw Holder - Metal Tail Control Arm (HN6038) - Align Metal Tail Pitch Assembly - Metal Aileron Lever - Metal Engine Fan - Align Metal SF Mixing Arm - Metal Elevator Lever Crash Kit - FiberGlass Stabilizer / 1.6mm - 600 Carbon Fiber Flybar Paddle/3K (H60143) - Skid Pipe H60137 - Servo Linkage Rod HN6037 - Tail Boom HN6063 - New Carbon Fiber Tail Blade - New Landing Skid-Black(H60126) - Align Feathering Shaft - Align Main Shaft - 600 Carbon Fiber Tail Boom/3K - Flybar Rod/440mm (H60108) - Main Drive Gear/170T H60019-03
Drone Volt Hercules 10 Maximum Transmission Distance FCC Compliant: 2.17 miles (3.5 km) Hovering Accuracy Vertical: ±1.5' (0.5 m) Horizontal: ±0.75' (0.22 m) Maximum Speed 33 mph (53 km/h) Maximum Wind Resistance 27 mph (43.5 km/h) Battery 2 x 6S (16,000 mAh) Flight Time With No Payload: 45 minutes Propeller Type 15.5 x 5.3 Motors 8 x T-motor by DRONE VOLT 4014 - 9 Software Pixhawk Maximum Capacity 22 lb (10 kg) Length M2M: 35.4" (900 mm) Dimensions With Propellers: 27.6 x 27.6" (700 x 700 mm) Weight With Propellers: 9.9 lb (4.5 kg)
RC boats, RC helicopters, RC airplanes, RC cars and trucks, RC crawlers, quadcopters and drone.Shipping
Rc planes, rc helicopters, drones, rc cars/trucks, rc boats and rc rock crawlers..Fedex/ups/dhl
Buy DJI Mavic 3 Quadcopter Drone Fly More Combo W/Camera, Transmitter, Battery & Charger�» from REALWORLDHOBBY Online Store one of the world's leading online retailers for a wide selection of RC Planes, RC Helicopters, Drones, Cars / Trucks RC, RC Boat, and RC Rock Crawler. Price : $1,500.00 Payment Options : PayPal, Bank Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International, and Xoom Shipping Service: FedEx/UPS/DHL Delivery Time : 5 - 7 Days Address : FX Sudirman - Jl. General Sudirman, Gelora - Kab. Tanah Abang, Jakarta 10270 Email Orders : order@realworldhobby.com Whatsapp/Call : +6283159484758 Description Product Mavic 3 from DJI offers photographers and videographers a unique feature that historically has been incredibly difficult to achieve; two camera types equipped on one drone and gimbal system. The wide angle camera features 20MP, and a 4/3" CMOS sensor from Hasselblad, as well as a 12MP telephoto camera equipped with a 1/2" CMOS sensor, up to 4k video, and 28x hybrid zoom.
Toys, electronic.
Plastic toys and seafood product.
Paper bag, stationeries, puzzle, note book, cards, hard box, packaging, promotional variations based on paper - etc.
Toys, games, mp3, tools.
Handicraft, batik, puppets, statue, child wood toys.
Sports cards, games, toys and consoles.
Seaweed, toy, cosmetic, beauty cream.
Steel, toys, electronics, garments, shoes and other footwear.Import export, air & sea cargo services, import and customs clearance service, international courier services, door to door services, domestic services, consignee/undername service
