SONYKS portable rugged GWT unit with 40 data channels. C/w large 10.4" multi-touch display, integrated pump. Incl. 2 batt., PSU, user manual and rugged case.
Highlights :
First unit with full onboard screen for GWT; top efficiency
Unmatched signal-to-noise ratio with broadband and FMC
Support non-Eddyfi rings; also Magneto-strictive collars
SPECS :
Batteries - typical life 8-10 hours
Cooling Sealed and fanless
Data storage SSD, 256 GB
Display resolution 1024 768
Display size 26.4 cm (10.4")
Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement
Nb. of transmit channels 40
Batteries - type 2x li-ion, rechargeable, DOT compliant
Compliance IEC 61010-1, CE, UKCA, WEEE, FCC Part 15, ICES-001
Data readback on PC software Yes
Output voltage 200V peak to peak
Probe recognition and setup (ChipID) Automatic with Sonyks tooling including ring type, size, serial number, pipe and angular orientation
Harness available Yes
Automated self-check Onboard capacitance and resistance testing
Connectivity Gigabit Ethernet, Wi-Fi 6 (802.11ax), USB 2.0 (Ã??3), HDMI
Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in)
Focussing options C-Scan imaging; Time delay focussing
GPS Accurate positioning to 2.5 m (8.2 ft)
Internal pump Yes
IP rating IP54
Laptop connectivity Yes
Maximum sample range 125ms (365m longitudinal mode; 200m torsional mode)
Max averaging 128
Nb. of receive channels 40
Onboard pump SSD, 256 GB
Receiver Gain Up to 100dB
Supported rings Sonyks Piezo and Magneto tools, Teletest and other commercial piezo-based rings
Supported Technologies/Techniques GWT, LRUT, MRUT
Storage Wi-Fi or Gigabit Ethernet
Transduction compatibility Magnetostrictive and Piezoelectric transducers
Weight (with batteries) 7.2kg (15.9 lb)
APPLICATIONS :
Corrosion Under Insulation (CUI) on insulated pipes and pipelines
High-speed, high-efficiency pipeline corrosion screening
Distribution, gathering, feeder or transmission pipelines
Pipeline integrity programs
Small diameter piping
Unpiggable pipes
Power plant pipelines
Buried pipeline inspection
Flanged pipes
River crossings
Road crossings
Drill riser inspection
Stainless steel pipe inspection
Chemical plant piping
Food piping
Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communication with a PC is used to remotely control the unit and to download the calibration reports.
* 3 systems in one device
* Automatic alignment and triggering
* Color touch screen
* Various topography
views * Electronically controlled chin rest
* Joystick orientation
* Pupil and corneal-measurement
Refractive Power Measurement
Spherical Refractive Power (S)
Measurement Range -25.00 D to +22.00 D
(at VD = 12.0 mm)
Display Unit 0.01 D / 0.12 D / 0.25 D
Cylindrical Refractive Power (C)
Measurement Range 0 D to �± 10.00 D
(at VD = 12.0 mm)
Display Unit 0.01 D / 0.12 D / 0.25 D
Astigmatism Axial (A)
Measurement Range 0 �° to 180 �°
Display Unit 1 �°
Minimum Pupil
Diameter Ã?? 2.2mm
Vertex Distance 0mm / 12.0mm /
13.5mm / 14.0mm /
15.5mm / 16.0mm
Measurement Time 0.2 seconds / single eye
Corneal Curvature Measurement
Corneal Curvature (K1, K2, AVG)
Measurement Range 5.00 mm to 11.00 mm
Display Unit 0.01 mm
Corneal Refractive Power (K1, K2, AVG)
Measurement Range 30.68 D to 67.50 D (n = 1.3375)
Display Unit 0.01 D
Corneal Astigmatism (CYL)
Measurement Range 0 D to 10 D (n = 1.3375)
Display Unit 0.01 D
Axis Of Corneal Astigmatism (AXS)
Measurement Range 0 �° to 180 �°
Display Unit 1 �°
Measurement Area
Cornea Ã?? 3.0 mm
(at 8.00 mm corneal
curvature)
Measurement Time 0.1 seconds / single eye
Measurement Of Corneal Shape
Display Range 9 D to 100 D
Features
Capable 212cc Loncin Engine
Provides reliable performance under heavy load
Emits reduced emissions and is EPA/CARB approved
Designed to provide effortless starting in the harshest temperatures
Compact 21-Inch Clearing Width
Great choice for those with small-mid sized driveways
Smaller storage footprint compared to most snowblowers
8" all-steel augers with a 10" 3-blade impeller capable of clearing snowfalls 20" tall
Manual 190�° Quick-Turn Chute
Allows snow to be thrown up to 36 feet in any direction
Whether it's over the fence or on your neighbor's car, you are in complete control
Forward & Reverse Speeds
Exercise (4) forward speeds depending on your preference
Convenient reverse speed allows you to let the machine do the work
Heavy treaded tires enhance traction for better maneuverability
Reversible Skid Shoes
Protects your concrete surfaces from scratches and/or skid marks
Double the product life by simply flipping them when worn down
Rugged Build
The exterior of the snow blower is completely rust-resistant
With proper maintenance, this snow thrower will go the distance
Clog Removal Tool Included
The Innov-X Omega X-Ray fluorescence spectrometer is a handheld XRF analyser. With its ultra rugged design, diverse field analysis is possible in any conditions.
The XRF delivers fast and precise identification and analysis of elements from phosphorus to uranium (P to U).
Advantages of Field Portable XRF.
In the past, studies relied exclusively on expensive and time consuming analysis based on samples that hopefully characterised the site. The portable XRF has revolutionised environmental investigations by allowing you on-the-spot elemental analysis, in real time. Measure the composition of soils, debris,
run-off streams, dust wipes, coatings, corings, paints, plastic and wood instantly,saving you time and money. From phosphorus to lead,
from low ppm to 100% - in soils, solids, liquids, powders, cores, fragments, filters & films, slurries and more. One simple test can analyse up to 25 separate elements in seconds, including priority pollutants. Determine zonal and contamination patterns; track pollutant migration caused by extreme weather; perform real-time surveys to delineate and define metals present.
In-situ soil analysis for rapid, comprehensive site investigations:
Delineate metals present and contamination patterns
Measure high volume field tests to minimise laboratory analytical costs
Test soil directly through plastic corings or bagged samples
Establish contamination boundaries and depth profiles for remediation and disposal
Collection of samples to produce rock-solid analytical data at the site:
XRF is non-destructive submit same sample for laboratory confirmation
Ensure validation requirements/targets are met on-site in real time
Prepared soil sample testing assures the maximum possible accuracy
Ultimate XRF Performance with
Silicon Drift Detector (SDD) Technology
The Innov-X Omega Xpress and Omega Xpress Vacuum
Alloy Analyzers utilize the latest in detector technology - an innovative, large area Silicon Drift Detector (SDD), commonly used and tested extensively in high end, laboratory based instrumentation. In comparison to a traditional
Si PiN Diode detector, the SDD provides:
10x improvement in signal to background ratio
Marked resolution improvement, from 195eV to 165eV
The capacity to handle 10x more counts
Key benefts to the user:
>3x improvement in reading speed.
Light element (Mg, Al, Si, P, S) analysis in air
3x better limits of detection for sensitive tramp elements
Benefits
Environmental studies can now save time and money with real-time, on-the spot elemental analysis - from Magnesium to Uranium,
From PPM to 100 % - in solids, liquids, powders, cores, fragments, filters and films, slurries and more. Portable XRF provides cost-effective, timely analysis.
Innov-X combined an x-ray tube source, multiple beam filtering and the HP PDA to deliver superior limits of detection, speed, precision and upgrade capability.
Features
Superior performance of Cr and other metals. Light element Analysis Program (LEAP) analyzes P, S, Cl, K and Ca
Utilizes advanced and universal XRF data modeling:
Compton Normalization: "Internal Standard" provides for quantitative analysis without site-specific calibrations
Fundamental Parameters: Standardless, ideal for samples with high and low concentration of several elements
Empirical Calibrations: "Calibration Curves" allows user-generated calibration curves
Add new elements and calibrations easily. Innov-X analyzers will meet your requirements today and in the future
View spectra on screen
Compare spectra for comparative analysis and display results versus standards
Stored tests can be re-run with new parameters or models
Data security: stores in binary format for data intel
The S1 TITAN is among the lightest (1.5 kg, including battery) tube-based handheld XRF analyzers on the market today. Fast analysis speed and exceptional accuracy are two key attributes that help define the S1 TITAN.
Other innovative features include an integrated touch-screen color display, 50 kV X-ray tube, SMART GradeTM timing, SharpBeamTM optimized X-ray geometry, Silicon Drift Detector (SDD), and an extremely tough housing that is sealed against humid and dusty environments. Contact our sales team today to learn more about the innovative S1 TITAN!
The S1 TITAN series is available in four (4) configurations: models 800, 600, 500 and 200. All models use Brukerâ??s SharpBeamTM technology. The S1 TITAN 800 and 600 use a FAST SDD detector to give you incredibly fast analysis times. The S1 TITAN 500 is configured with a fast, accurate, and affordable standard SDD detector. The S1 TITAN 200 is configured with an economical Si-PIN detector. In addition, the S1 TITAN can be configured with calibrations that are optimized for a variety of sample materials- including a wide range of alloys, various mining & environmental samples, as well as restricted materials.
SharpBeamTM technology
The S1 TITANs patent pending SharpBeamTM technology optimizes the detector and tube geometry. The optimized geometry has many desirable effects, including:
Reduces power requirements
Reduces weight
Improves measurement precision
Improved detection limits
Increases battery life
S1 TITAN Technical Details
NEW! pXRF Specification comparison (PDF)
Calibration range (depending on specific calibration):
S1 TITAN 800: 37 elements, including light elements Mg, Al & Si
S1 TITAN 600: 37 elements, including light elements Mg, Al & Si
S1 TITAN 500: 32 elements
S1 TITAN 200: 32 elements
Weight: 1.5 kg (3.3 lbs) with battery
Size: 25 cm x 28 cm x 9 cm (10 in x 11 in x 3.7 in)
Sample temperature:
S1 TITAN 800: Default to 150 C with Ultralen window. Up to 500C with Kapto window and hot surface adapter.
S1 TITAN 600: Default to 150 C with Ultralene window. Up to 500C with Kapton window and hot surface adapter.
S1 TITAN 500: up to 500C
S1 TITAN 200: up to 500C
TITAN Detector ShieldTM:
Included on all S1 TITAN models
Integrated camera:
S1 TITAN 800: Included
S1 TITAN 600: Optional
S1 TITAN 500: Not available
S1 TITAN 200: Not available
Detector:
S1 TITAN 800: FAST SDD�®
S1 TITAN 600: FAST SDD�®
S1 TITAN 500: Standard SDD
S1 TITAN 200: Si-PIN
Collimator options:
S1 TITAN 800: 5mm standard. Optional 8mm or 3mm
S1 TITAN 600: 5mm
S1 TITAN 500: 5mm
S1 TITAN 200: 5mm
X-ray tube: Rh target; max voltage 50 kV
Filter changer:
S1 TITAN 800: Five position motorized filter changer
S1 TITAN 600: Five position motorized filter changer
S1 TITAN 500: Fixed filter
S1 TITAN 200: Fixed filter
f measuring. Bluetooth wireless capabilities enable you to seamlessly integrate your leica total station with a pda or handheld data collector. Or, use the mini-usb port, the included industrial leica usb stick, or a simple rs232 serial cable to save measurements.
Variety of distance measuring options
The leica reflectorless total station gives you the flexibility of choosing the distance measuring method that best suits the job at hand. Enjoy the ability to measure dangerous or inaccessible locations with reflectorless measurement, or choose the included flat prism for everyday measurement. You can even extend your total station's measuring range up to 10, 000 feet by adding a round prism.
We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.
Ideal as a construction stakeout total station
Perfect when combined with fc field controller and software
The entry-level value choice is the gts-100n. Built with legendary topcon precision and durability, the gts-100n provides the construction professional with a dedicated lay-out solution. Use the on-board software to layout points in the field, confident that with topcon, you'll be right on target. Or use any of topcon's field controllers running one of our range of software packages tailored to the tasks you want to perform.
We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.
Expanded, full numeric keypad
On board programs & 24, 000 point data storage
Ideal as a construction stakeout total station
Perfect as a forensic evidence measuring and recording instrument
Superior, when combined with a data collector and field software
The gowin is a high-value total station. Built for the professional who needs both precision and durability. The gowin tks-202 represents a commitment to supplying surveying, construction and law enforcement with the world's most cost effective, high quality positioning instrument.
We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.
New / ups, dhl, fedex
134 Manicure Pedicure Instruments Suppliers
Short on time? Let Manicure Pedicure Instruments sellers contact you.
