Send us your specification and we will quote accordingly. Our standard specification: Iodine between 1000-1100 Particle size: -30 or -60 Price $1350
Deformed Bar : 8mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 29mm, 32mm Plain Bar : 8mm, 10mm, 12mm, 16mm ASTM A615, ASTM 706, BS4449, JIS 3112,
Pure Lead Ingot (Pb 99.97%) IMLI, LME Registered
Granulated Activated Carbon Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length :10" (Most Common for Residential) , 20" (Most Common For Commercial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Activated Carbon Coconut Shell Iodine 1000 and Up Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10" : 50pcs/Carton 20", 30", 40" : 25pcs/Carton Container 20GP / 40GP / 40HQ Ordering Code : GAC-AAXXXX AA : Inch XX : Iodine Number 800/1000
Activated Carbon Coconut Shell for Gold Mining, Water Purification and other Application Usage Specification : Mesh : 6x12, 8x30, 12x40, 30x60 Iodine Number : 600 - 1200 1 Sack = 25kg Customize Sack is available Container 20GP / 40GP / 40HQ Ordering Code : AC-XXXYYYY AC : Activated Carbon XXX : Mesh YYYY : Iodine Number 600-1200 Contact Person : Karl Steven +62 811 923 00 33 WhatsApp / WeChat Available
Carbon Block Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length : 9 3/4", 9 7/8", 10" (Most Common for Residential) , 20" (Most Common For Commercial), 30", 40" (Most Common For Industrial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Coconut Shell Activated Carbon Iodine 1000 with FDA Compliance polymer Bonding Outer Finish : Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10", 20" : 25pcs/Ctn 30", 40" : 20pcs/Ctn Container 20GP / 40GP / 40HQ Ordering Code : CTO-AA AA : Inch
plain Bar : 8mm, 10mm, 12mm, 16mm Deformed Bar : 8mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 29mm, 32mm ASTM A615, ASTM 706, BS4449, JIS 3112,
The Superior price/performance CE5000 Series cutting plotter offers performance comparable to high-end units at reasonable cost. In addition to outstanding basic performance, the CE5000 incorporates a range of features such as registration mark detection to ensure high-precision cutting of printed materials. This plotter helps increase work efficiency and productivity. This plug-in application allows direct cutting from graphics applications. For higher productivity, create graphics or text in Adobe Illustrator or CorelDraw, then simply output directly to the plotter. Direct output from the software Output by layer / color Possible to check the cutting lines by preview window Multiple over cutting is possible ARMS can be controlled by software Centering, Rotate, Mirror for easy layout Matrix copy for higher productivity Auto-welding for binding same color of shapes Tiling / Paneling for segmentation of cutting The CE5000 comes with a drawing program for Windows 2000/XP: ROBO Master Pro version 2.5 now with AutoTracing, as well as the completely updated (and cross-platform) Cutting Master 2 Production Manager and Plug-in for Adobe Illustrator version 8 through CS2 and CorelDRAW including X3 (Windows 2000/XP) and Adobe Illustrator 10 through CS2 on Mac OS X 10.2 and newer, including the latest Mac models running Intel Core Processors. CuttingMaster 2 plug-in ntegrates seamlessly into these applications to: apply registration marks to the layout for print and cut designs, to prepare the layout for output to the plotter, and to set the cutting conditions of the plotter. The CE5000 is an economical sign making system, Compatible with both Windows and Macintosh operating systems.
Specifications - Technology: Piezo Electric - Max. Resolution: 450 dpi - Cal. Droplet Size: 80 pico litre - Adj. Range for Droplet Size: 75-85 pico litre - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns - Nozzle Diameter: 52 microns - Firing Frequency: 20 kHz - Operating Temperature: up to 90°C - Ink Compatibility: Solvent, water-based and UV Inks Printer compatibility: Agfa :Anapurna XL2 (only for white ink) / Kornit Breeze 921 The Spectra Galaxy JA 256/80 AAA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 450 dpi. Four electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 256 nozzles. The nozzles are arranged in a single line, at a native 0.010 inch distance between nozzles. The fluid interface and electrical connection are at the top of the jetting assembly and several mounting configurations are possible. This jetting assembly contains serial-to-parallel converters for selecting which jets to fire; all jets can be fired simultaneously or individually. These Spectra heads are manufactured in the US and passed Dimatix Spectra US quality control tests to ensure the best durability. It carries a manufacturer product warranty. NOTE: This print head is used for white ink on Agfa :Anapurna XL2. If you need the print head for the Agfa :Anapurna XL2 colour channels, please refer to PPHSPGA50 (Spectra Galaxy JA 256/50 AAA)
Manufacturer: Agfa Printer compatibility: Agfa Anapurna M2 / M4F / Mw v4.0 / Mv 4.0, Dilli Neo Titan UVT-1604D / Neo Venus UVV-2506GW / Neo Titan UVT-1606W DP part number : PBEAG003 This conveyor belt is suitable for Agfa Anapurna M2-M4F-Mw / Dilli Titan printers. This is the original Agfa part (number D2+7321099-0009). The size of the belt is 1.6m width by 2.06m length. It weights 16kg. This printer belt combines the newest polymer technology with the unique features of linked spiral design. The innovative spiral construction produces a smooth, clean running fabric with high dimensional stability. In addition, contaminant resistance additives are extruded within the polymer of the monofilament yarn. The all-monofilament construction gives excellent rugged durability, stability, and accurate permeability. This printer belt is designed for easy installation limiting down-time and the need for special technical assistance. This belt can be put together in minutes eliminating the need to disassemble machinery and saving time. Installation instructions are provided and additional support is available. Note that the table needs to be realigned after installing the belt and this might require an engineer intervention. This belt fits Agfa Anapurna Mw and Mv version 4.0. Previous versions of Anapurna Mw and Mv use a shorter conveyor belt (part number PBEAG002). This product includes the appropriate lancing kit, which consisting of the pintel to zip the two open ends op the belt together and the wire to guide the pintel.
To cope with peak volumes in a highly competitive environment, you need a partner you can trust. The Proâ?¢1107 have been developed to take up your challenges. As complete, modular powerhouses, they are designed to handle your heavy print orders efficiently during peaks. Highly reliable and customisable with a range of finishing options, these systems are an asset to any high-volume production environment. Pro 1107: 110ppm mono production printer. Comes with eye-level solour touch-screen operation panel, duplex, 3000 sheet paper supply from 3 trays. Mandatory Options: Brand plaque, decurler unit, printer driver, toner and operator instructions. DC Controller 320GB. * Robust Data Centre controller. * Superior productivity and reliability. * Genuine IPDS printing. * Professional output quality. * Versatile finishing options.
HP FB700 sFRM Printhead only Printer compatibility: HP Scitex FB500 / FB700 The Ricoh / Hitachi GEN3-E3 print head is suitable for HP FB700 / FB500 printer. This master printhead is a robust metallic construction offering resolution up to 360dpi for fast speed and high quality printing. There are 192 channels for a drop volume of 30 or 65 pl. This is HP / HP Scitex original printhead (number CQ114-67019).
Manufacturer: Epson Printer compatibility: Epson Stylus-Pro-11880 DP part number : PPHEP11880 This new generation Epson MicroPiezo TFP printhead is suitable for Epson Stylus Pro 11880 printers. It has a native resolution of 2.880 x 1.440 dpi, providing the highest resolution in the industry. The Epson Stylus Pro 11880 Printhead has a minimal drop volume of 3.5 pl. This is the original Epson print head (part number F179000).
Specifications Technology: Advanced MicroPiezo® TFP print head with ink repelling coating technology Type: Drop on demand ink jet printhead Number of channels: 10 Operating frequency: Up to 50 kHz Drop volume: 1.5 - 3.5 picoliters (Multi drop size technology) Nozzle per channel: 360 Total amount of nozzle: 3600 Compatible ink types: Pigment Manufacturer: Epson Printer compatibility: Epson Stylus Pro 7700 / Stylus Pro 9700 / Stylus Pro 7900 / Stylus Pro WT7900 / SC-P7000 / SC-P9000 DP part number : PPHEP16821 This Advanced MicroPiezo TFP printhead is suitable for Epson Stylus Pro 7 and 9 series printers. This is the original Epson part (number F191040 or F191010).
Printer compatibility: Sanyi Tech Starjet 7702L, MeiTu MT-StarJet 7702 / MT-StarJet 7702L / MT-StarJet 7703 / MT-StarJet 7703L / MT-StarJet W7701 / MT-StarJet 77802L, Forni 7090E, TEC Sign Maker TJ-1601 (Eco-Solvent) This solvent resistant Epson printhead is suitable for solvent based Chinese DX7 printers. This printhead has 8 channels and 180 nozzles per channel. It has a 3,5 picoliter drop size with Variable-Sized Droplet technology. This is the original Epson Printhead. This printhead is the new DX7 head model released by Epson early 2014. It is locked and is not compatible with old printhead control boards installed on printers before the end of 2013. A chip decoder can be purchased separately for such printers.
JFX500-2131 Printhead GEN5 Assy Printer compatibility: Printer compatibility: Mimaki JFX500-2131 This printhead GEN5 is suitable for Mimaki JFX500-2131 printers. This is the original Mimaki part.
HP Idanit / Pressjet Ink Jet Head Assy Printer compatibility: HP Scitex Idanit, Pressjet This printhead is suitable for HP Scitex Idanit / Pressjet printers. This is the original HP Scitex part
HP FB950 FRM PRNHEAD MASTER N Printer compatibility: HP Scitex FB950 The Ricoh / Hitachi GEN3-E3 print head is suitable for HP FB950 printer series. This master printhead is a robust metallic construction offering resolution up to 360dpi for fast speed and high quality printing. There are 192 channels for a drop volume of 30 or 65 pl. This is HP / HP Scitex original printhead
Tire cord use for tire or hose manufacture, detail is 840/d2, 1260/d2, 1000/d2, 1500/d2, 1680/d2, 1870/d2. And also have filament 100% polyester and nylon
PARENTNashik offers spot welding electrodes shank & holder in different shape, style as per international standards made in Chromium copper zirconium | C-18150 | group-A | & Beryllium Copper | C-17510 | group-A for spot welding gun, portable welder & robot gun. These shanks are supplied along with water cooling tube, O ring, water distributor. Also shanks are available with class-4 insert dully brazed & PEEK fitted. PARENT is expert in making various custom type shanks | holders for your any type of portable welders from Cold forming process in minimum production cost & quick supply all over the world. Presently PARENT shanks are being used by leading automobile manufacturer in Europe, US & Asia. PARENTNashik Electrodes Shank robotics holder types Straight, Single bend, double bend, 3D, Stem straight #Quick Delivery #Best Price #Excellent Quality.
