The Xaar 501 GS8 U can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : UV Drop volume : 8 â?? 40pl Number of grey level* : 6 Filter : Yes (Last chance filter) Heater : Yes TF Technology model : None Typical firing frequency @ Max DPD*: 8khz Dimensions (WxDxH) : 104 x 17 x 113mm Jetting orientation : Downshooter and Skycraper Inlet / Outlet connections : Hose barb 4mm
New Xaar Original 1002 GS2 Printhead The All New Xaar 1002 raises the standard in single-pass inkjet printing. Building on the market-leading Xaar 1001, this printhead delivers exceptional print quality and unrivaled reliability. Exceptionally smooth print tones and solid areas which is perfect for printing amazing life-like images, pin sharp text and bold colours 1000 Optimised Geometry nozzles deliver significantly improved drop placement accuracy and consistent drop volume even with heavily pigmented and high viscosity fluids Excellent print uniformity delivers even colour density across the printhead and the entire print width 8 grey levels, chosen dynamically, at 360 npi give an effective resolution greater than 1000 dpi, for Xaar 1002 GS6 and GS12.
Original XAAR 382/35pl Printhead To be used with: Wit-color Ultra3000 4H, WIT-COLOR ULTRA3000 6H, WIT-COLOR ULTRA3000 8H, MYJET WD3216XR60, MYJET WD3212XR60, Remarks: Original
The new Xaar 1003 GS12C Ceramics Printhead is the next generation 1,000 nozzle ceramics printhead from Xaar. Building on the market-leading Xaar 1001 and Xaar 1002 Ceramics Printheads which led the digital revolution in ceramic tile printing, the Xaar 1003 GS12C Printhead delivers a step change in print performance for ceramic tile manufacturers. The Xaar 1003 Ceramics printhead family introduces an important new feature the XaarGuard which provides the ultimate in nozzle plate protection, and coupled with other design innovations, achieves the longest maintenance-free production runs in the industry once per shift, or less. In addition, the new Xaar 1003 GS12C provides a step forward in consistent print quality across the wide print widths used for large tile, thanks to Xaarâ??s Tuned Actuator Manufacturing. The Xaar 1003 GS12C printhead is fully backward compatible with Xaar 1002C and 1001C based ceramic printers. This ensures that ceramic tile manufacturers can maximize the return on their printer investment with the ability to install the 1003C printhead in 1002C or 1001C based printers as a single head replacement or, to upgrade full print-bars or, even upgrade complete printers to take advantage of the improved durability, print quality and productivity that the Xaar 1003Ceramics printhead delivers.
The Xaar 501 GS8 UR can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : UV / Oil Drop volume : 8 40pl Number of grey level* : 6 Filter : No Heater : No TF Technology mode : None, Pulsed, High flow mode Typical firing frequency @ Max DPD*: 8khz Dimensions (WxDxH) : 104 x 17 x 100mm Jetting orientation : Downshooter and Skycraper (see picture) Inlet / Outlet connections : Hose barb 4mm
The Xaar 502 GS15 S 180 can be used as a replacement to Xaar Proton 60pl printheads (discontinued). An ICM (Interface connection module) enables Xaar Proton 60pl based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : Solvent Drop volume : 70pl Number of grey level* : 6 Filter : Yes (Last chance filter) Heater : No TF Technology�® mode : None Typical firing frequency @ Max DPD*: 7khz Dimensions (WxDxH) : 104 x 17 x 113mm Jetting orientation : Downshooter (see picture) Inlet / Outlet connections : Hose barb 4mm
This Xaar Omnidot 760 printhead is suitable for Mutoh Zephyr 65 / Zephyr TS printers. The Xaar Omnidot 760 provides the optimum in flexibility, quality, reliability and speed. Based on Xaarâ??s unique patented multi-pulse greyscale technology Xaar 760 is user-definable and delivers a choice of binary or dynamic variable drop sizes, ranging from 8pl to 40pl. Each of the 760 nozzles are controlled independently to create a printed result with exceptionally smooth gradation and tonal range â?? ideal for high quality graphics, packaging and traditional print applications. This is the original Mutoh part (number KY-09015). Product Specifications Active nozzles: 764 Print swathe width: 53.8 mm Nozzle pitch: 70.6 �¼m Nozzle density: 360 npi Drop velocity: 6 m/s Printhead weight: 130 g Dimensions: 86 x 42.2 x 164.8 mm Drop volume: 8 pl Typical firing frequency: 40 kHz
New Panasonic Original Printhead UH-HA820 for DGI FabriJet Specifications Technology: Piezo Electric Max. Resolution: 600 dpi Nominal Drop Size: 11pl Adj. Range for Droplet Size: 3 to 14pl Max. Frequency: 30 kHz Ink Compatibility: Aqueous-based inks This Panasonic UH-HA820 is suitable for DGI FabriJet FT-1604X & FT-3204X printers. This is the original Panasonic part (number UH-HA820).
Roland Original BN-20/FH740/RE-640/SOLJET PRO4 RF-640 Printhead (DX7) -6701409010 To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640, Roland RA-640, Roland RE-640, Roland RF-640, Remarks: Original Part no.: 6701409010
To be used with: Roland SOLJET ProII SJ-540,SJ-645EX,SJ-655EX,SJ-740,SJ-745EX,SJ-1045EX, SJ-1000,SC-540,SC-545EX, Roland VersaCAMM SP-300V, SP-540V, VP-300, VP-300I, VP-540I, Roland SOLJET PRO III XJ-640, XJ-740, XC-540, XC-540W, XC-545MT, Roland VersaArt RS-640 mimaki jv3(jv3-130, JV3-130sp, JV3-160, JV3-160sp, JV3-250, JV3-250sp etc.) Mutoh RH-II(Falcon2), RH-3, Spitfire 65, Spitfire 90, Blizzard 65, Blizzard 90
To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland RF-640, Roland FH-740, Roland RA-640, Roland RE-640, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640 and Roland VersaCAMM Print & Cut VS-540/540I Part no.: 6701409010 Remarks: Original
To be used with: Roland RA-640, Roland RE-640, Roland RF-640, Roland VS-420/VS-640//VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640 and Roland VersaCAMM Print & Cut VS-540/540I Part no.: 6701409010 Remarks: Original
New Ricoh Original Gen5 7PL-35PL [Short Cable] Printhead Manufacturer: Ricoh Printer compatibility: Agfa :Jeti Mira MG2716 S/HS/Jeti Mira MG2732 S/HS/Jeti Tauro H2500/Jeti Titan S/Jeti Titan HS CET Color Q5-250/Q5-500/Q5-1000/Q5-250h/Q5-500h/Q5-1000h Docan 1212 UV/M6/M8/M10/R3300/FR3210/FRT3116/R5200 Akad NovaJet UV M6 Handtop HT2512UV-D FR8/HT1600UV HR4/HT2500UV HR8/HT3200UV HR8/HT3200UV HG12/HT3116UV FR8 TwinJet RH-3262/RH-3264/RH-1862/RH-1864/UV-F2500, MTMC TS - 1325G/MC - F2513G/MC - F2030G Wit-Color UVIP 5R 3304/UVIP 5B 2513/UVIP 5B 3020/UVIP 5R 3303/UVIP B5100-2513 Vivex CS 3300, Mtutech MT-RH1510R, TitanJet 3302-G5N, Mantis MTS-UV1513RI, AOJet APRO 250FR Caiyi UV2030/UV2013/UV2015/UV2018/UV2513/UV2515/UV2518/UV2520 Rose Maxcan RGP-MC45-G5/RGP-MC48-G5, Flora PP2512UV-G/PP1612UV-G/LJ 320G/LJ 180G Indask F1212 UV/F2518 UV/F2030 UV/FR2510 UV/FRT3215 UV/FRT3225/R3300 UV/R5200 UV LavaPrint 4896-HRC/78118-HRC, AmicaSystems FG2512, Mehta Rasterjet RJ2512/Rasterjet RJ2512H/Rasterjet RJ2030/Sprinter Turecolor TC-F1212/Turecolor TC-F2512/Turecolor TC-FR2512/Turecolor TC-F2030/Turecolor TC-FG2030/POWER PRO 3200/POWER 4S
This GEN3-E1 printhead is a robust, metallic construction offering resolutions up to 360 dpi for fast speed and high quality printing. The Ricoh / Hitachi GEN3-E1 (MH1801/1901) printhead is suitable for a range of Teckwin printers. There are 96 channels for a drop volume of 30 or 65 pl. Specifications Active nozzles: 96 Piezo type: D33 stacked PZT Print swathe width: 17.2 mm Nozzle pitch: 0.6809 mm Drop velocity: 8 m/s Printhead weight: 60 g Dimensions: 120 x 35 x 8 mm Life: 100 billion actuations per nozzle Drop volume: 30 or 65 pl Firing frequency: up to 20 kHz
New D.gen Original Head FB-740 Inkjet (1000005689) This FB-740 Head, Inkjet is suitable for d.gen Artrix GT & Teleios GT printers. This is the original d.gen part (number 1000005689).
To be used with: Icontek: TW-3306HC, TW-3308HC,TW-3306HA, TW-1806A, TW-3306HD, TW-3308HD, TW-3308HZ, M1, M3 SID: XCS PLUS 320-8H, XCS 320-8H, XES 250, XES 320, XH250 Crstaljet: S1806SPT510_35PL, S3306IISPT510_35PL , F3308IISPT510_35PL, S4306SPT510_35PL, F4308SPT510_35PL, S6306IISPT510_35PL, F6308IISPT510_35PL Infiniti: FY-3208HA, FY-3206HA, FY-3208HF, FY-3206HF, FY-3208H, FY-3206H, FY-3208R, FY-3206R, FY-3208G, FY-3204G Phoaeton: UD-3206E, UD-3208E, UD-3206G, UD-3208G, UD-3208GF, UD-3206GF, UD-3208H Roland: AJ-1000, AJ-740 VUTEK: QS3200,QS3200R Remarks: Original Description: This Seiko SPT510/35pl printhead and the latest type SPT510-35PL printhead with new IC driver perform the same for most printers. But for INFINITI / CHALLENGER FY-3208H printers (Serial number before 32026212974), produced before January 5, 2011 and with USB board, users should choose this SPT510-35PL printhead(PRH-SPT-002-E).
Original Seiko Colorpainter 64s/100s Printhead To be used with: Seiko: Colorpainter 64s, Colorpainter 100s HP: designjet 9000s, Designjet 10000s OCE: CS 6060, CS 6100 DGI: ST1806 Remarks: Original
Original Seiko Spt508GS/12pl Printhead To be used with: Solvent printers For WER, Infiniti, Pheaton, Acrylistal, Icontek Remarks: Original
Original Seiko Spt255/12pl Printhead To be used with: SID XQ210, Crstaljet S1806SPT255_12PL Remarks: Original
To be used with: Crystaljet 3000,4000,4000 II, 6000II, 9000series large format printer, which are produced after January 5, 2011 by INFINITI / CHALLENGER. ZHONGYE ZY-6800,ZY-5300,ZY-3400,ZY-3200,ZY-2500,ZY-2000,ZY-FB Series large format printers with Seiko spt510/35PL Remarks: Original Description: This is latest type SPT510-35PL print head with new IC driver chip produced by Seiko. Both new and old IC driver chips perform the same
