Find Verified Steel Bars Suppliers, Manufacturers and Wholesalers

With Our Reinforcing Bar Couplers, you will be able to simplify and make it easy for you to install or build reinforced concrete.
Our couplers offers precise weight control and higher strength and better quality with its uniform properties throughout the length.

Rebar Couplers simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.

The company brings the fines quality MS (mild steel), Alloy Steel and Stainless steel bright bars. Manufactured from the best raw steel alloys our steel bright bars They are available in various shapes and sizes like round, square, flat and hexagonal.

ROUNDS: 5mm to 110mm
SQUARES: 6mm to 40mm
HEXAGONALS: 6mm to 40mm
SECTIONALS: As per Required by Customer
We offer superior quality bright bars in a variety of grades, sizes and tolerances.

Applications
They are extensively used in the Automobile industry and products like nuts, rivets, studs, bolts, connecting rods, piston rods, drills, pouches, injector, connecting rods, axles, propeller shafts and many more.
Supply Conditions
Length - 3 to 6.5 Meters
Cold Drawn, Centerless Ground, Peeled & Polished, Rough
Peeled or Smooth Turned bars
Tolerances - h9, h10, h11, k12, k13
Grit Polish as per Customer's Request
Heat Treatment- Annealed, Solution Annealed or Water Quenched
Bars End Finish - Chamfered ends, Plain ends without Burrs or Sharp Edges
Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.

We are supplier and exporter of TMT Rebars. TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storied buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS

Length: 6- 12 meter

1. Angles, Shapes And Sections Of Iron Or Non-alloy Steel.
2. Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of 600 Mm Or More, Hot Rolled, Not Clad, Plated Or Coated.
3. Bars And Rods, Hot-rolled, In Irregularly Wound Coils, Of Iron Or Non-alloy Steel
4. WIRE OF IRON OR NON-ALLOY STEEL
5. INGOTS
6. OTher Bars And Rods Of Iron Or Non-alloy Steel, Not Further Worked Than Forged, Hotrolled, Hot-drawn Or Hot-extruded, But Including Those Twisted After RollinG

We are manufacturers of forged or rolled flat bars of Alloy/Carbon/Stainless Steel of any size as per requirements.

RE-BAR Couplers (100% Make in India Product) are a mechanical splicing system for the
connection of Reinforcement Bars from12 mm to 50 mm Diameter.

Classification of our RE-BAR Couplers:

o Provides Continuity of TMT Bars.
o Allows full ductile elongation of TMT Bars.
o NO Reduction of TMT Bar Cross sectional area.
o Full Tension Splicing. Bar Break under tensile load.
o Trustworthy alternative to lap splicing.
o Solves bar congestion problems.
o Reduces steels wastages.
o Shortens Construction cycle time.
o Easy Installation.
o 100% traceability of materials origin & production lots.
o Each joint with JB RE-BAR coupler is stronger by125% & above of TMT Bars.

These are 100% indigenous products manufactured in compliance with BIS-16172:
2014: IS1608, IS 1786; IS 456-2000, ACI-318, BS-8110-1, ASTM A-1034/A1034M, which meets the international Standards.

Epoxy/Zinc Coated Rebar is provided in any concrete subjected in Coastal area (salt exposer area) to resist from corrosion and increase the service life of a structure. These are used in Marine Structure, Water Treatment Plant/s, Bridges, Piers and Industrial foundation etc.

Epoxy/Zinc Coated reinforcement steel bars are used for corrosion protection. It is highly
effective corrosion protection system for Reinforcement. Epoxy treated rebars has
been used in numerous other industries, including the general construction of
buildings, piers, marine, industrial foundations, highway barriers, bridges, coastal sea
walls, and Salt Exposed area where concrete is used.

We are the distributor and exporter of famous tmt rebars in tamilnadu,India..If you have any idea to import below material kindly contact me.We will offer best price.
TMT 8mm Dia 5.8mtr/11.8 mtr length
TMT l0mm D ia S.8 mtr/11.8mtr length
TMT 12mm Die 5.8 mtr / 11.8mtr length
TMT 16mm Dia 5.Bmtr/ 11.8mcr length
TMT 20mm Dia 5.8mtr/11.8mtr length

REINFORCEMENT STEEL / TMT REBAR
PRODUCT QUALITY : Various international standards, viz. IS:1786 Grade Fe415/ Fe500/ Fe550 / Fe 600 / Fe 415D/Fe 500 D/ Fe 550 D / Fe 500 S of BIS of India, ASTM A615 Grade 60 of the USA, BST 500 of DIN 488 of Germany, BS 4449 Grade 460 of Great Britain etc.

TMT BArs 6mm to 40mm size
Available
Price daily changes
Unit per kg price

Carbon Steel Round Bars C45, C55, C4140, C8620, 20MnCr5, EM353
Our Carbon Steel Round Bars are manufactured to meet the highest industry standards, offering excellent mechanical properties, durability, and performance across a wide range of applications. Available in various grades to suit diverse industrial requirements:

C45 Medium carbon steel known for good strength, wear resistance, and machinability. Ideal for shafts, axles, and general engineering components.

C55 High-carbon steel offering enhanced hardness and strength, suitable for tools, dies, and automotive components.

C4140 (EN19) Chromium-molybdenum alloy steel with high tensile strength, toughness, and fatigue resistance. Commonly used in gears, crankshafts, and high-stress parts.

C8620 Case-hardening steel with a tough core and hard, wear-resistant surface. Widely used in automotive and machinery components requiring surface strength.

20MnCr5 Low-alloy case-hardening steel with excellent toughness and wear resistance after heat treatment. Ideal for gears, shafts, and camshafts.

EM353 (EN353) Case-hardening steel with high core strength and superior surface hardness, perfect for heavy-duty applications like transmission parts and pinions.

Sizes Available: Custom sizes available on request
Delivery: Fast and reliable dispatch to meet urgent requirements
Standards: Supplied as per ASTM, DIN, and other international specifications

We supply Mild Steel (MS) Flat Bars IS 2062 Grade, used extensively in construction, fabrication, engineering, and infrastructure works.

Available Sizes: Width 25mm to 150mm | Thickness 5mm to 25mm
Length: 6 meters standard (custom lengths available)

Key Features:
- Uniform thickness & smooth edges
- High load-bearing capacity
- Ideal for structural, grating, frame, and base applications
- Compatible with welding, bending, and machining

MOQ: 10 Metric Tons
Packing: Bundled with steel strips or as per buyer request

Payment Terms: L/C or Advance
Delivery: 7-10 working days from PO confirmation

U.P. Steel Corporation is a 75+ year Indian steel supplier, now exporting high-grade MS Flats to buyers across Asia, Africa, and the Middle East.

1. Angle (Angle Bar / L-Angle) in India
Description:
Steel Angles are L-shaped structural components used for framing, reinforcement, and support in construction. Available as equal or unequal angles.
2. Channel (C-Channel / U-Channel) in India
Description:
Channels are U- or C-shaped steel sections, used for structural support in construction and mechanical applications.
3. Beam (I-Beam / H-Beam / Universal Beam) in India
Description:
Beams with an I or H cross-section are used to carry heavy loads in structural framing.
4. TMT Bars (Thermo Mechanically Treated Bars) in India
Description:
TMT bars are high-strength reinforcement bars produced through a process of heating and rapid cooling, offering superior strength and ductility.
5. Round Bars in India
Description:
Round bars are cylindrical steel rods used in structural, manufacturing, and automotive applications.

Leading supplier and exporter of Inconel 600 & 601 bars, offering superior heat and corrosion resistance, ideal for high-temperature and industrial applications.