Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. Since all the hydrocarbon molecules of these oils are saturated, Group II base oils have better antioxidation properties. They also have a clearer color and cost more in comparison to Group I base oils. Still, Group II base oils are becoming very common on the market today and are priced very close to Group I oils.
Bitumen emulsions are usually dispersions of minute droplets of bitumen in water and are examples of oil-in-water emulsions. The bitumen content can be varied to suit different requirements and is typically between 30% and 70%. The primary objective of emulsifying bitumen is to obtain a product that can be used without the heating normally required when using cutbacks and paving grade bitumen. In the manufacture of bitumen emulsions, hot bitumen is sheared rapidly in water containing an emulsifying chemical (emulsifier). This produces very small particles of bitumen (the dispersed phase) dispersed in water (the continuous phase). The bitumen particles are stabilized in suspension and do not readily coalesce due to the presence of the emulsifier, which is concentrated on the surface of the bitumen particles. During application, the water in a bitumen emulsion is either lost by evaporation, or it may separate from the bitumen because of the chemical nature of the surface to which the emulsion is applied. This process is referred to as breaking. Because bitumen has a density only slightly higher than water, sedimentation of the bitumen droplets in an emulsion during storage is very slow. Emulsions can usually be regenerated after long storage times by gentle stirring to re-disperse the bitumen droplets.
Gilsonite is a natural, resinous hydrocarbon found in the Uintah Basin in northeastern Utah; thus, it is also called Uintaite. This natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphalt. Gilsonite is soluble in aromatic and aliphatic solvents, as well as petroleum asphalt. Due to its unique compatibility, Gilsonite is frequently used to harden softer petroleum products. Gilsonite in mass is a shiny, black substance similar in appearance to the mineral obsidian. It is brittle and can be easily crushed into a dark brown powder. When added to asphalt cement or hot mix asphalt in production, Gilsonite helps produce paving mixes of dramatically increased stability. We can provide based on customer requests Packing will standard approved packing
Group III base oils are greater than 90 percent saturates, less than 0.03 percent sulfur and have a viscosity index above 120. These oils are refined even more than Group II base oils and generally are severely hydrocracked (higher pressure and heat). This longer process is designed to achieve a purer base oil. Although made from crude oil, Group III base oils are sometimes described as synthesized hydrocarbons. Like Group II base oils, these oils are also becoming more prevalent.
GOLD ROTO SPIN series oils are range of high quality spindle lubricants for use on modern textile machines. Manufactured from the highest quality base stocks and ashless additives, it reduces spindle wear, protects against rust and may be easily removed by washing textile contamination occurs.
SN500, SN300, SN150
SIGNATURE 20W-40 is high performance conventional four-stroke motorcycle engine oils primarily intended for general use in all types of four-stroke motorcycles and engines. Features and Benefits Quality mineral oils and an advanced additive system to provide good engine cleanliness, good wear protection and corrosion protection. Motorcycle engine oils protect engine and gear and make clutch working. Packing :- 500ml , 900ml , 1ltr , 50ltr, 210ltr
Description AC Power 220-V. Electric Fuel Transfer Pump 50L. Per Minute Digital Fuel Meter Trolley Wheel Plate & Tyres 6.00-16 Size = 2 Nos. Suction Pipe House x 12 Ft. Anti Static House Dispensing Nozzle Manual With Swivel Tractor Toeing Bar
TRIO ELC machine for filtration of hydraulic oil, turbine oil and gear oil, contamination removal less than micron, capacity 50 liter, 100 liter.
AVAILABLE BITUMEN GRADE 60/70 , QUANTITY AS PER YOUR REQUIREMENT DIRECTLY FROM REFINERY OF GULF AREA IN BULK QUANTITY (US$ 435 PER MT OR TON AT FOB). THE PRICE WILL BE VALID FOR 15 DAYS ONLY.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
We supply all category of Bitumen worldwide, connect us back for the price.
Lubricants : a. Industrial Oil b. Lubricant Oil c. Process Oil d. Automative Oil e. Waxes f. Greases Product Description : Based on Client Requirements, Price of product ( USD price or FOB price) : As per Product data, Product origin : India, Key Specifications/Special Features : Based on Client Data / Specifications Minimum Order Size and Packaging details : As per Client requirements and type of equipment
These oils are series of fully synthetic passenger car lubricants based on synthesized hydrocarbon technology.These oils are utilizes a combination of selected high viscosity index synthesized hydrocarbon, fluids, esters & a unique viscosity index improvers. These oils have an entirely different molecular structure provides superior cold starting capability for engine as low as -33° C. The high viscosity index & improved, volatility properties retain a fully effective lubricants film under the conditions of high temperatures, stress and speed. These oils are suitable for all seasons use and are fully compatible with conventional petroleum based engine oils &can provide maximum benefits in well maintained engines. Product Features Very high viscosity index Excellent thermal & oxidation stability Outstanding detergency & dispersancy. Very low pour point Good rust &corrosion properties. Benefits Outstanding engine wear protection & cleanliness in both gasoline& diesel passengers carengines Excellent performance in turbocharged passenger car engines Easier cold starting & fasteroil flowto critical parts during start up Average fuel savings between 2% to 4% Extended oil drain interval. Recommended Maruti Skoda Mahindra Toyota Ford Renualt Hundai Honda cars etc. Price : USD $6.20
It is a premium quality lithium soap based all purpose grease, fortified with EP additives. It is specially to enhance re-lubrication interval, upto 50,000 km to 80000 km under ideal road condition. It has good thermal, chemical and structural stability including water wash out properties. It provides excellent lubrication and protection to the bearing parts over a wide temperature & pressure range, under normal as well as adverse mechanical conditions. Product Features Lubricates and protects the components for a longer period. Excellent structural stability. High load carrying capacity. Antirust and corrosion capabilities Superior tackiness Optimum lubrication, even under adverse mechanical conditions. Applications Lubrication of plain as well as anti-friction bearings in automotive, earth moving equipment, mining equipment and general industrial machineries. Fleavyduty ball and roller bearings of steel rolling mills, operating under adverse conditions Universal joints and spline shafts working under heavy torque or with acute transmission angles Suitable for bearings operating at temperature upto 150T. Precautions : This grease is compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin. Price : USD $4.25
It is a premium quality lithium soap based all purpose grease, fortified with EP additives. It is specially to enhance re-lubrication interval, upto 50,000 km to 80000 km under ideal road condition. It has good thermal, chemical and structural stability including water wash out properties. It provides excellent lubrication and protection to the bearing parts over a wide temperature & pressure range, under normal as well as adverse mechanical conditions. Product Features Lubricates and protects the components for a longer period. Excellent structural stability. High load carrying capacity. Antirust and corrosion capabilities Superior tackiness Optimum lubrication, even under adverse mechanical conditions. Applications Lubrication of plain as well as anti-friction bearings in automotive, earth moving equipment, mining equipment and general industrial machineries. Fleavyduty ball and roller bearings of steel rolling mills, operating under adverse conditions Universal joints and spline shafts working under heavy torque or with acute transmission angles Suitable for bearings operating at temperature upto 150T. Precautions : This grease is compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin. Price : USD $4.75
It is premium quality multi-grade engine oil (SAE 20W40), formulated with specially developed to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, correction, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycle. Protection Protects the engine components from heat, compression and combustion deposits Protects clutch from slippage by maintaining required balance between slip and grip Protect gear box from wear while deliver ing maximum torque and power to the wheels. Price : USD $3.25
It is a high quality performance multigrade engine oil, meeting API:CF/CF-4/SJ performance requirements. formulated from selected base oils and additives, to suit petrol and diesel engines. Product Features Viscosity suitable for wide range temperatures and different engines. High performance features, keeps engine clean and minimizes maintenance cost. Good anticorrosive, antiwear, antirust and antioxidation properties Reduced exhaust emission due to high detergency Increased oil drain period due to good dispersant properties Lower oil consumption and increased fuel efficiency Quicker engine start and longer battery life. Price : USD $3.30
