Sandeep Garg & Company equipped with the latest XRF analyzers for accurate reading on any metal. Our XRF alloy analyzers are portable hand-held devices that follows stringent quality control norms to ensure the requisite quality of metal scraps as per the contractual standards.
Tfr is innovative product of taurus designed to measure impedance along with resistance of transmission line t is Salient features: Ø the equipment operates at 25 khz which and virtually isolates the parallel transmission Tower earth path without physical isolation of over head earth wire by use of this high frequency and neutralizing circuits. Ø reliable, steady, repeatable readings in induced environment Ø constant current output (20ma) from a high voltage source (250v) to override the noise in the induced environment. Ø the taurus preziohm tfr is designed to be immune to power frequency and its harmonics Ø dynamic measurement. Ø housed in ip67 pelican casing. Packaging as per international standards
200 tones in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for bricks, hallow or solid concrete blocks, using appropriate capacity machine. In general compression testing machine consists of a load frame with suitable platens and a pumping unit with pressure gauge, either hand operated or electrically-cum-hand operated. Load frame and pumping unit are connected by pressure pipes. Wooden packing
Features of digital hour meter: Displays rpm, hours Programmable no. Of teeth Programmable Specifications : Supply: 8 – 35vdc Dimension 72*72*80
The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
Manual operation to microprocessor operated testers from 0-60kV, 0-80kV, 0-90kV and 0-100kV.
We are offering eut monitoring system that includes eut monitoring, analysis and data recording. These eut monitoring systems analyzes data during the test for interference or failure conditions, and records test data for retrieval after the test is complete. It is designed as a stand-alone system to communicate with the main test system using our eut monitoring and test software. The eut (equipment under test) monitoring system combines the following: Monitoring instrumentation Video and audio equipment Software to provide eut signal monitoring (analog and digital) Eut stimulation Monitoring for visual or audio interference during testing The monitoring is enabled only after the test level is established with the main test system, since the EUT Monitoring System is fully synchronized with test system. These are appreciated because all parameters captured by the EUT Monitoring System during testing ensures to accurately recreate interference or failure points to resolve compatibility issues monitored. These systems are configured specifically to cater the test needs and can be configured for specialized requirements such as audio breakthrough required by mobile radio standards and ABS/TCS testing needed in automotive test standards. Our entire range of standard as well as customized seamless interface with main test system completes the control of the EUT Monitoring System from the control room console. System Components: EUT stimulation and monitoring instruments selected to cover applicable specifications and meet your price/performance requirements Video monitoring system using shielded color cameras to visually monitor equipment under test An audio monitoring system can supply as a stand-alone solution or built into the video camera system A system controller with application software that offers power to control monitoring equipment These are used to process and store data, graphics, and results of series measurements System cabling and switching to connect the control room with the chamber Shielded room allow test engineers complete control of the EUT monitoring system from the desktop Fiber optic links for analog and digital signal monitoring. We are offering Radiated Conducted EMS that is used for EMS Testing Many electronic products. The subassemblies must meet immunity testing requirements depending on the product's target marketplace. These are designed specifically to meet the requirements of specific environmental use and internal manufacturer's requirements. It also needs an engineer to control instrumentation from a variety of vendors and perform detailed test procedures for numerous specifications. These are known for integrating test instrumentation, system controls, positioning devices, and software to perform automated, semi-automated, and manual immunity measurements in an anechoic chamber, shielded room, or test cell. The range of test specifications is carefully evaluated to develop an integrated test environment covering the basic, generic, product family and product specific standards. The entire recommendation is based on proven system installations, in-house research and development, and extensive experience with dozens of test instrument suppliers. It result in a seamless interface the test system and the test environment. We are offering a range of Radiated Conducted EMI that is designed and manufactured to use in an anechoic chamber, shielded room, OATS, or test cell to perform automated, semi-automated, and manual emissions measurements. These systems are integrated with test instrumentation, system controls, positioning devices and software. This helps to test specific products or subsystems for electromagnetic emissions according to international, R&D and manufacturer-specific standards. Designed especially to meet customerÆs requirements, these receive the exact system solution. This is offered without unnecessary components and costs associated with off-the-shelf, "one size fits all" test systems. Further, we also offer turnkey solution for our Radiated Conducted EMI, which includes system designing and installation with dozens of test instrument supplies. The turnkey EMI Test System designed by us assist to meet product testing requirements. A typical system includes: EMI test instrumentation selected to cover applicable frequencies and meet your price/performance requirements. Antennas/LISNs/Clamps selected to match both test standards and test facility capabilities. Measurement Accessories such as switching and positioning devices that simplify control and increase efficiency. An EMI Main Control Console with instruments and system controls strategically placed to provide test engineers easy access to all functions, and a comfortable, ergonomically-correct work environment. A System Controller with Application Software that offers state-of-the-art power to perform emissions tests from pre-scan to final measurements and to control multiple EMI analyzers and receivers. Proven Solutions: Our test system developments are based on the systems in Europe, North America, and Asia. Each new system incorporates the latest technologies instead of an off-the-shelf approach to design and to explicitly cover the standards. It provides accurate, repeatable measurements and minimizes demands on your limited resources. We are offering Observation System that is appreciated by the clients for conforming to various international quality standards. These are known as Specific Absorption Rate Test Systems (SRC), which include SAR Measurements, System Components, Measurement System, Probes & Measurement Accessories and Position Controller & Positioning Robot. The detail description of Specific Absorption Rate Test Systems is as follows: The SAR System: It is used to measure electromagnetic fields and calculated SAR over a customer-specified frequency range. All tests are conducted in a shielded test room. SAR Measurements: SAR testing works with the thermal effects of human exposure to RF electromagnetic fields. It corresponds to the relative amount of RF energy absorbed of a device close to the body. The test is conducted to verify that the RF energy emitted by a device is within permissible limits for public exposure as defined by test standards. The SAR Measurement System is comprised of the following subsystems: Measurement System: It is an easy to use, flexible package optimized for dosimetric evaluation of radio products. The whole package includes Data Acquisition Electronics and system control computer. Probes and Measurement Accessories: Various broadband probes and support accessories are available based on test requirements. It includes probes to measure current distribution on radio products in free space, to measure fields inside fluids simulating body tissue and to test radiated emissions from mobile radio equipment. Position Controller and Positioning Robot: The automated robot positions the probe inside the tissue-simulating liquid over a precisely defined volume. The robot is controlled by a multiprocessor positioning device. Air tieght packing with container, steel packing, wooden packing
Electromagnetic flow meter Our Electromagnetic Flow Meter accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the Electromagnetic Flow Meter is an obstruction-less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology offers highest ability & better measuring accuracy in form of 4-20 mA DC linearly proportional to volumetric flow Features : Size DIN 10 to DIN 3000 NB pipe line. High Accuracy better than + 0.5% of reading. Zero pressure drop. Suitable for high viscosity conductive liquids. Digital flow rate / Totalizer Indication / Batching system Isolated Transmitting Output 4-20 mA. No Grounding Rings require. Minimum Upstream & Downstream straight length. Compact & Rugged, IP 65 protection. Remote flow indication totalizer / Batching system Data Logging & Wireless Data Transfer System through GSM Modem Applications : Effluent Treatment Plants. Sewage Treatment Plants. Water supply schemes. Steel & aluminum. Pulp & Paper. Chemical & Fertilizers. Food & Drug. Pumps & valve calibration lab. Dairy Industry. Corrosive liquids. Sugar industry. Sugar Industry. Textile and printing textiles Hotels & Resorts Water parks Buildings & Infrastructure Municipal corporation
MODEL CG 06 Nominal Diameter : 6mm,flow rate 18 kg/min,Temp:-200 to +200 degree C,accuracy .1%,Warranty 1 year,weight 8.6 KG,316L SS,Flanged End connection, CE, ATEX Certified, ISO Certified,Out Put 4-20Ma, with HART , Pulse, Type: Coriolis Mass flowmeter MODEL CG 15 Nominal Diameter : 15mm,flow rate 50 kg/min,Temp:-200 to +200 degree C,accuracy .1%,Warranty 1 year,weight 12 KG,316L SS,Flanged End connection, CE, ATEX Certified, ISO Certified,Out Put 4-20Ma, with HART , Pulse, RS 485. Type: Coriolis Mass flowmeter MODEL CG 25 Nominal Diameter : 25mm,flow rate 200kg/min,Temp:-200 to +200 degree C,accuracy .1%,Warranty 1 year,weight 23 KG,316L SS,Flanged End connection, CE, ATEX Certified, ISO Certified,Out Put 4-20Ma, with HART , Pulse Type Coriolis Mass flowmeter MODEL CG 50 Nominal Diameter : 50mm,flow rate 1000kg/min,Temp:-200 to +200 degree C,accuracy .1%,Warranty 1 year,weight 75 KG,316L SS,Flanged End connection, CE, ATEX Certified, ISO Certified,Out Put 4-20Ma, with HART , Pulse Type: Coriolis Mass flowmeter MODEL CG 80 Nominal Diameter : 80mm,flow rate 3000kg/min,Temp:-200 to +200 degree C,accuracy .1%,Warranty 1 year,weight 134 KG,316L SS,Flanged End connection, CE, ATEX Certified, ISO Certified,Out Put 4-20Ma, with HART , Pulse. Type: Coriolis Mass flowmeter
1.High-precision calibration: charging current, discharge current, charging voltage and discharge voltage are all calibrated by Agilent with high precision to ensure the accuracy of current and voltage within 0.5%. 2.Independent channels with configurable parameter and condition setting for each individual channel. 3.Equipped with complete input and output devices, hardware and software protection, polarity reverse protection, power failure protection and etc. 4.Precise control without overshoot during CC-CV and CV-CC transition. 5.Strong software system and friendly HMI (Human-Machine-Interface). 6.Multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting. 7.Automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data. 8.Equipment hardware control loop uses current and voltage double loop control. No ripple for constant current and constant voltage switching. 9.Data exported as EXCEL and TXT files, as well as chart files, can be shown as data analysis waves for charging and discharging, voltage, capacity, current & time feature.
1.battery pack monomer consistency evaluation test. 2.Internal resistance test of the entire battery pack. 3.Load test of battery pack. 4.Battery pack high current protection test. 5.Battery authenticity short-circuit protection test. 6.Battery pack continuous charging test. 7.Battery pack high current charging protection test.
We have avilable following ships spareparts for Sale. Product-Basler electric power supplier Eurotherm process control equipment. If required then please contact us on
What exactly is a bomb calorimeter Bomb calorimeters are used to precisely calculate the energy shift that occurs during a reaction. The original Berthelot calorimeter was developed into the contemporary Bomb calorimeter. The combined bomb calorimeter of today is constructed of corrosion-resistant steel. An apparatus known as a bomb calorimeter is used to measure the heat of reaction at a constant volume and the measured heat, also known as the change of internal energy (E). Chemistry allows for the measurement of a reaction's heat changes at a fixed pressure or volume. How a Bomb Calorimeter Works The combustion heat of samples that can burn with oxygen is measured using a specific kind of constant-volume calorimeter called a bomb calorimeter. Four crucial components are Features: Fully automated with a coloured PLC touch-screen display One unit; no assembly is necessary With automatic oxygen filling, direct screen reading, standardising capability, and 400 data storing in memory RSD +/- 1 percent and temperature resolution of 0.001 degrees Celsius. 100 pills of 1 g of or 100 calories (imported) Used for calculating the amount of heat produced during the combustion of fuel and other organic materials. Supplied complete with a water jacket constructed of brass/steel sheet that has been duly nicked and chromium-plated, with a bakelite lid. Heavy-duty motorised duly stirrer for consistent circulation Pettel, Briquette Apply forcefully. Lighting and firing apparatus spanners, a magnifying lens with nickel-chrome wire, a vibrating and buzzing device, and a cotton reel Steel crucible, gas-releasing valve
1.It's used for safety testing of lithium battery protection boards. 2.Quick testing, precise testing and laboratory mode. 3.you can protect Internal resistance test, overcharge and over discharge test, short circuit protection test etc.. 4.Type of protection board - Lithium iron phosphate, ternary lithium cobaltate, lithium manganate and lithium titanate. 5. Support the bar code scanning function and automatically save the test data.
