Dear Buyer - I take immense pleasure in introducing to you Amaravathi Mines& Minerals Pvt Ltd a two year old company in the business of manufacturing of barytes (baso4), exports from India, If your company required barytes powder please let us know the requirement and we are very happy to service you in the supply of barytes. Barytes specification Property Value Appearance Gray free flowing powder Iron as fe2o3 0.44% Matter in soluble in water 0.024% Particular size (passing thru 75ãâµ) 1.46% Relative density (@27/270c) 4.20 Alumina as al2o3 0.48% Insoluble minus silica 94.50% Silica as sio2 4.02% Calcium and magnesium as caco3 52 mg/kg 200 mess passing through 97.5 (api grade). 1 and 1.5 tone bags
Lumps
API Grade Chapter 13:
Typical performance of BENTONITE API 13A when tested as per API 13A section 4 is as follows:
Properties
Specifications
Viscometer Dial reading at 600rpm
32-40
Yield point/plastic viscosity ratio
2-3
Failtrate volumer (in cc)
13.5-15.0
Moisture %
9.5-10.0%
Residue greater than 75 micron (200 mesh) wer analysis
1.0-3.0%
However, Customised specifications as per buyer requirement can also be made.
Packaging: Jumbo Bags
Application: Crude
Wollastonite
Lumps
Specification
SiO2
48% min
CaO
44% min
Fe2O3
0.25% max
L.O.I
1.5% max
Size
0-10mm,0-50mm
Packing
in 1mt big bags
Uses
For steel production
Purified Talc Powder (KORB-SB-1) is the purest form of talc mineral in powder form. It is considered safe for use in pharmaceuticals and food industry,Talc Powder is a versatile mineral filler and extender. It is used in a variety of industries. It is white-colored, soft, chemically inert, lamellar, opaque, hydrophobic and organophilic.
17782 Ores Minerals Suppliers
Short on time? Let Ores Minerals sellers contact you.
Ceramic Grade Bentonite (KORB-BEN-BP03.60) is produced by activation of
specially selected Ca- Bentonite having a very white color, high brightness and very low iron content which provides a big advantages for colour sensitive ceramic and tile products.
It can be used in fine ceramics, porcelains, enamels and floor tiles, improves moulding
properties, plasticising and stabilising properties of the products.
Ceramic Grade Bentonite (KORB-BEN-BP03.60) is available in big bags or loose form. When kept in cool, dry and non-humid conditions no deterioration may be observed in 2 year period.
NOTES: THIS MATERIAL TESTED BY ENDURA (H & R JOHNSON).THE KNOWLEDGE IN THIS PRODUCT BULLETIN SHOULD BE CONSIDERED AS GENERAL INFORMATION ONLY AND NOT BE USED FOR PURCHASE SPECIFICATIONS TYPICAL ANALYSIS ARE BASED ON THE AVERAGE FIGURES.
Ceramic Grade Bentonite (KORB-BEN-LUMPS) is produced by activation of
specially selected NA- Bentonite having a very white color, high brightness and very low iron content which provides a big advantages for colour sensitive ceramic and tile products.
It can be used in fine ceramics, porcelains, enamels and floor tiles, improves moulding
properties, plasticising and stabilising properties of the products.
BASIC SPECIFICATIONS:
Water of Plasticity 70-%
Fired SHRINKAGE 13-14%
Dry MOR 22.00KG/cm2
Fired MOR 150.36kg/cm2
Moisture 20%
Water Absorption 17.23%
Whiteness 67.9
L 80%
a 0.37
b 10.6
Ceramic Grade Bentonite (KORB-BEN-LUMPS) is available in big bags or loose form. When kept in cool, dry and non-humid conditions no deterioration may be observed in 2 year period.
NOTES: THIS MATERIAL TESTED BY ENDURA (H & R JOHNSON).THE KNOWLEDGE IN THIS PRODUCT BULLETIN SHOULD BE CONSIDERED AS GENERAL INFORMATION ONLY AND NOT BE USED FOR PURCHASE SPECIFICATIONS TYPICAL ANALYSIS ARE BASED ON THE AVERAGE FIGURES.
Laterite is a soil layer that is rich in iron oxide and derived from a wide variety of rocks weathering under strongly oxidizing and leaching conditions. It forms in tropical and sub tropical regions where the climate is humid. It is a reddish weathering product of basalt. Laterites are rusty-red in color because of high iron oxide content.
Laterite is well known in asian countries as a building material for more than 1000 years. It was excavated from the soil and cut in form of large blocks. Uses and benefits of laterite uses :
Used as a building material. Strong, hardened varieties of laterite are sometimes cut into blocks and used as brick stones for building houses.
Laterites are economically most important for ore deposits, such as bauxite. Hardened laterite varieties are also applied for the construction of simple roads. Nowadays solid lateritic gravel is readily put in aquaria where it favours the growth of tropical plants. In artifacts, monuments, sculpture, oil and gas reservoir, decoration etc. Laterite- cement blocks are more economical building units for walling units.
Product Description : Offering Best Supply of Barite
Product origin : Mangampeta, Kadapa, Andra Pradesh, India
Key Specifications/Special Features :
Density - Specific Gravity - 4.10, 4.20
Residue Graterthan 75 Micron should be 3.0 weight percent Maximum -- 0.68%
Particles less than 6 microns in
Equivalent spherical Diameter should -- 19.30%
be 30 weight percent Maximum
Water soluble content -- 83.20mg/kg
Minimum Order Size and Packgaing details : Packing 50Kgs and 1MT,1.5MTS Jumbo Bags
Pratibha Refractory Minerals is an illustrious company in the field of Supplier of refractory minerals such as Dolomite, Talc powder and kaolin. We do offer our clients the best quality of Dolomite mineral. Our products are made up with accurate composition and they are supreme pure. We always take care of quality norms and slandered of our products.
Dolomite-Preface
The name Dolomite is widely used but its other names are-dolomitic limestone and dolomita. Dolomite belongs with carbonate family. It is composition of calcium and magnesium. Both elements may be present in same amount or may be more or less.
Usage of Dolomite:
Dolomite is an industrial product and has long list of applications. It is widely used as refractory minerals. It is used to frame refractory bricks which are used in steel producing industries
We do supply our products mainly in Indonesia and all over the world. Main Indonesian cities where we supply our refractory products are: Bali, Jakarta, Java, Kalimantan, Tarakan, Ambon, Kali, Sumbawa, Timor, Ternate, Sulawesi, Buton, Sumatra, Batam and Bintan. Average market price of Dolomite is 15000 Indian Rupees per ton.
Price is indicative only, it may change without prior notice and depends on requirements and can be negotiated case to case.
SODA FELDSPAR
Application:- Sanitary ware, Glass, Electrodes etc.
The glass and ceramic industries are the major consumers of feldspar and account for 95% of the total consumption.
Coal Fly Ash sourced from power plants from East India viz ,NTPC Kahalgaon , Tata Power ,Adhunik Power ,DVC Mejia ,DVC Andal ,DVC Dugapur ,DPL to Bangladesh Ports
Purity as mgso4 7h2o > 99%
Magnesium sulphate as mgso4 > 48.5%
Magnesium oxide as mgo > 16%
Magnesium as mg > 9.6%
Sulphur as s > 13%
Sulphite as so3 > 32%
As per customer required
17782 Ores Minerals Suppliers
Short on time? Let Ores Minerals sellers contact you.
