Find Verified Ores Minerals Suppliers, Manufacturers and Wholesalers

Product Description:
Gypsum is Calcium Sulphate Dihydrate (CaSO4.2H2O) deposited in sedimentary layers on the seabed. Under high pressure and temperature, Gypsum turns into Anhydrite (CaSO4). Gypsum / Anhydrite are produced from open-cast mines or underground mines. Gypsum is normally only screened to remove fines (mainly mudstones), then crushed and finely ground for various applications. Gypsum is an indispensable component of Ordinary Portland Cement as it has a great influence on water consumption of standard consistency and strength simultaneously. During the cement manufacturing process, 4%-6% of Gypsum (by weight) in crushed form is introduced during the final grinding process upon cooling of clinker. It plays an important role in controlling the rate of hardening or setting of cement. If not added, the cement will set immediately after mixing of water leaving no time for concrete placing. Over 60% of Gypsum produced across the world is used in cement manufacturing. Other applications include the production of plaster, plasterboards, Gypsum fiberboard, and Gypsum blocks. It can also be used as a soil conditioner and has various other specialized applications. An important property of Gypsum is that it is naturally fire-resistant.

Product Specification:
Mesh: 200
Witness: 95%
Initial: 5 7 Min.
Final: 12 15 Min.
Powder water ratio: 1:0.7
Modulus of Rupture (Kg/Cm2): 75
Fluidity (cm): 23
Max (Gypsum / 100g Water): 1.62
Setting Time: 7 15 Min.
Sulphur Trioxide SO3: 52.09%
Calcium Oxide CaO: 40.18%
Loss of ignition (LOI): 5.06%
Free Lime: 0.014%

Product Description:
Due to its higher Swelling, higgher bond strengght, high viscosity, low filter loss with high yield value its requirement Quantitatively is less than that of other Bentonite, thus not only saving money but eliminating expensive storage with less hanlding chargers.

Product Specification:
Moisture: 13% Max.
Seive Analysis: 98% Min.
MB Value: 420 Min.
Gel Formation Inex: 80 Min.
Thermal Stability: 50% Min.

We are offering Barite Powder to our clients

Product Specification:
Brightness: 86-91%
Purity: 98%
Specific Gravity: 2.65
PH Value: 8-9
Color: White
Boiling Point: 1600 Degree Celsius
Density: 4.49 g/cm3
Hardness: 3 to 3.5 mohs
Melting Point: 1580 Degree Celsius
Molar Mass: 233.38 g/mol

Product Features:
Low oil demand, High refractive index & specific gravity and Easy dispersibility.
Good resistant to weathering and chemical.

Product Description:
We offer our clients with a qualitative range of Chrome / Chromite Ore in Foundry Grades. These are procured from reputed manufacturers in the industry. Our range is in compliance with the set industry standards and offered at competitive prices. We also offer these in customized compositions as per the client's requirements.

Product Specification:
Cr / Fe: 1.5% Min.
Cr2 O3: 46% Min.
Si O2: 1.5% Max.

Product Description:
We have emerged as one of the leading manufacturers and suppliers of a wide collection of Natural Gypsum Lumps/ High Grade Raw Gypsum for
Various size from 0-50mm

Product Specification:
Grade Standard: High Grade
State: Soild
Physical State: Crystals
Usage: Cement Industry / Pop Making
Color: White
Purity: 99% CASO4

Chemical Composition:
Oil content : 0,77% (CEA 1185)
Moisture : 3,34 % (stove)
Fe Total : 71,4 % (ICP)
SiO2 : 0,45 % (ICP)


Al2O3 : 0,11 % (ICP)
CaO : 0,17 % (ICP)
P : <0,03 % (ICP)
Zn : <0,03 % (ICP)
S : 0,032 % (LECO)
Cl : 0,020 % (Ionic Chromatography)
Cu : 0,22 % (ICP)
Cr : 0,08 % (ICP)

Granulometry:
Bigger than 10 MM : 1,18 %
Between 8 10 MM : 0,57 %
Between 5 8 MM : 2,96 %
Between 3 5 MM : 6,94 %
Between 2 3 MM : 5,12 %
Between 1 2 MM : 20,33 %
Between 0,5 1 MM : 20,20 %
Between 0,1 0,5 MM : 33,47 %
Smaller than 0,1 MM : 9,23 %

Chemical Composition:
Oil content : 0,77% (CEA 1185)
Moisture : 3,34 % (stove)
Fe Total : 71,4 % (ICP)
SiO2 : 0,45 % (ICP)


Al2O3 : 0,11 % (ICP)
CaO : 0,17 % (ICP)
P : <0,03 % (ICP)
Zn : <0,03 % (ICP)
S : 0,032 % (LECO)
Cl : 0,020 % (Ionic Chromatography)
Cu : 0,22 % (ICP)
Cr : 0,08 % (ICP)

Granulometry:
Bigger than 10 MM : 1,18 %
Between 8 â?? 10 MM : 0,57 %
Between 5 â?? 8 MM : 2,96 %
Between 3 â?? 5 MM : 6,94 %
Between 2 â?? 3 MM : 5,12 %
Between 1 â?? 2 MM : 20,33 %
Between 0,5 â?? 1 MM : 20,20 %
Between 0,1 â?? 0,5 MM : 33,47 %
Smaller than 0,1 MM : 9,23 %

The natural extraction and best practices makes this product ready to use in Glass, Cement and other industries according to the need.

We follow stringent mechanism to source quartz sand from different mining zones and process that to meet client needs based on their application and requirement.

Material : Silica Sand (Dry),
Sio2: 90-92%,
MESH: 30/60 (AFS 40/45),
Packing: New HDPE with Liner,
Delivery: Additional charges will apply for any port India.

Use for decoration and any more

Use for housing , vastu shashtra , show piece and any more

Dolomite is a carbonate mineral composed of calcium magnesium carbonate CaMg (CO3)2. The term is also used to describe the sedimentary carbonate rock dolostone. Natural Dolomite Powder is of White Color and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. We are recognized as one of the prominent Dolomite Rock Powder Manufacturers and Suppliers in India.

Our Bentonite is used as a binder for animal feed. It holds the pellet together, slow the passage of feed through the digestive system increasing uptake of nutrients.
Bentonite has an affinity for some of the active elements of toxin products formed by bacteria in the digestive tract, and its application in feed allows more rapid weight again.

We supply and manufacture superior quality Natural Bentonite Powder to various industries across India.

Our Natural Betonite Powder has a tremendous swilling ability and natural thickening property. Our Natural Betonite Powder is easily available in the market within competitive prices.

We hold specialization in manufacturing & supplying of Foundry Grade Bentonite Powder throughout the domestic market. Owing to its vast industrial usage, we make it available in different grades and ratings.

To deliver it in the best condition, we meticulously packed it. Further, we can deal with the demand for it in time-efficient manner.

if looking for IOP Grade Bentonite Powder that complies with all the requisite standards, then get in touch with us. We are a trusted entity, engrossed in manufacturing & supplying of IOP Grade Bentonite Powder from Gujarat, India. Its formulation and packaging are done as per the expert's guidelines so that quality and shelf stability are guaranteed. Further, buyers can get it from us in retail or bulk as per their requirements.

With the help of our skilled professionals and certified vendors in the industry, we are capable of offering a wide array of Industrial Mineral. After procurement, our offered minerals are tested under the supervision of quality controllers with set industrial standards. In addition to this, these minerals are processed using ultra-modern technology at vendors' end to offer complete satisfaction to our clients.

Certification - As buyer Require
Specs - Pure, Balanced Composition
Place of Origin Gujarat, -India
Port Of Loading Mundra Port,
Payment Term DP,LC, T/T

Packing - HDPE Bags 25kg, 50kg, Jumbo Bag Packing, Mini Order Qty 20 feet container.

Gypsum Powder:

Setting Time : 23 To 25 Min

Mesh : 200

Purity : 97%

Colour : Pure White

Packing : 25 Kg Per Bag

Product Details:

Packaging Type : HDPE Bag
Grade : A
Form : Crystal Granules, Powder
Color : White
Material : Sand, Silica, Stone
Packaging Size : 25,50,1000 KG Bag

Our range of Mineral sand is competitive including Silica Sand, which is widely applicable and uniform in size. It is used for water filtration, foundry, painting, water treatment and plastering. The product is fine in texture and sourced from reliable vendors for ensuring quality.It is one of the processed mainerals available having a wide application in processing units

Additional Information:
Item Code: SS
Pay Mode Terms: L/C (Letter of Credit)
Port of Dispatch: Mundra
Production Capacity: 10000 Matric ton
Delivery Time: 10 Days
Packaging Details: We can Provide you on customer requirement like 25 kg 50 kg Double bag pallet packing and also box packing

We are engaged in offering and extensive range of Extra Super Snow White Barytes Powder. This product is available with us as per industry standards and uses in high Grade Paints, Copper, Plastic, Paper, Rubber industries and many more. Customer like our product for its effective usage in various places.