Lost Circulation Material popularly known as LCM in Oil & Gas drilling industry. It is of many types like Cellulose fibre, Mica / Muscovite / Nut plug / Quick seal / etc. We manufacture all type of LCM Material.
LCM/Lost Circulation Material/Lost Circulation Additive:
Cellu-Seal/Max-Seal/Pills is a versatile lost-circulation material engineered to mitigate both significant lost circulation and minor seepage losses.) is specially crafted flaky material out of eco-friendly Cellulosic fibres, used & compatible for all type of fluid system i.e., Water base, Oil Base & Synthetic based.
It evenly mixes and does not form lumps. With negligible effects on rheology, it replaces Muscovite & Calcium carbonate flakes. Available in Coarse, Medium & Fine grades help sealing pores and pore throats of permeable formations encountered during drilling of depleted zones.
This is equivalent to MIX-II of SLB, Baro-Fibre of Halliburton, CHEK-LOSS of Baker Hughes and so on.
Other products include Qwik-Seal equivalent of SLB's MI-SEAL, Nut Plug, Super-Sweep & Mica Flakes
Acts as a thinner and dispersant in drilling mud systems.
Enhances fluid loss control for efficient drilling.
Stabilizes rheological properties to maintain drilling fluid consistency.
Extends temperature limits for high-temperature drilling.
Assists in oil emulsification to stabilize drilling fluids.
Reduces flocculation to prevent particle aggregation.
Stabilizes water-based drilling fluids for overall drilling efficiency.
17851 Ores Minerals Suppliers
Short on time? Let Ores Minerals sellers contact you.
Release stuck pipes at relatively low cost.
Release of drill pipes that are stuck due to differential pressure between wellbore and the formation.
It is equivalent to SLBs Pipe-Lax
Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India.
Applications:
Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as:
- a retarder for Portland cement
- a fertilizer or soil conditioner
- mineral filler
- oxidizing agent in glass manufacture or other industrial applications.
Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement.
Imported Gypsum from Iran:
Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.
Quartz is one of the most well-known minerals on the earth with numerous uses. Sand, which is composed of tiny Quartz pebbles, is the primary ingredient for the manufacture of glass. We feel pride in introducing ourselves as a leading Quartz Lumps Exporters from India. Mineral-grade packaging is provided for safe and easy delivery of Quartz Lumps. We welcome orders from Middle East, East Asian and several other countries and ensure timely shipment.
Applications :
It is used as an abrasive for sandblasting, grinding glass and cutting of soft stones. Quartz powder is also used in ceramic tiles along with feldspar.
Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.
Applications:
Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.
Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.
Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.
Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.
Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.
Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.
Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
A member of kaolinite family, Ball Clay is renowned for its plasticity and green strength. They consists varying proportions of kaolinite, mica and quartz, with small amounts of organic matter and other minerals, and are commercially values because they increase the workability and strength of various ceramic bodies and have white or near white firing characteristics. Ball clay is processed to minimize the levels of coarse particles. This enhances better workability and higher strength.
Applications :
It forms a major part of many ceramic applications, including sanitary ware, tiles, table wares and to an increasing extent non-ceramic applications like functional fillers and advanced application for example technical ceramics.
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
China Clay is a clay mineral with the chemical composition AlSiO3O5(OH)3. It is layered silicate mineral. It is soft earthy, usually white in color, produced by the chemical weathering of Aluminium Silicate mineral like Feldspar. Commercial grades of China Clay are supplied and transported as dry powder form, semi dry noodle form or as slurry.
Applications:
- It is used in Cer/bamics for body & glazing of Tiles and Sanitary Wares.
- In paper it is used as filler. It is also used for paper coating purpose.
- It is used in paint also to extend Titanium Dioxide (TiO2) and modify gloss level.
- It is used in rubber to enhance reinforcement properties.
We are supplier and exporter of Calcined China Clay.
We are offering an extensive range of high-quality Calcined China Clay that is used for paints, rubber and soap industries. Features: Chemically inert Correctly formulated Enhanced shelf life Specifications: Type: Powder Colour: White Packaging - As per Client Applications- Paints, Rubber and Soap industries.
China Clay is a clay mineral with the chemical composition AlSiO3O5(OH)3. It is layered silicate mineral. It is soft earthy, usually white in color, produced by the chemical weathering of Aluminium Silicate mineral like Feldspar. Commercial grades of China Clay are supplied and transported as dry powder form, semi dry noodle form or as slurry.
We are supplier of Zeolite Mineral with K20 6% +/-, Mgo 5% +/-, Cao 11 +/-, AL203 11% +/-, , Silicio 57% +/-, Aluminio 11.8% +/-, Calcio 12.64 +/-,Hierro 2.20 +/-, Potasio 6.42 +/-. We have the better Price from Mexico
Zeolite Granuels, Powder for used in Aqua culture, Agriculture and paper indsutry
The power of Zeolite The zeolites are a popular group of minerals known as hydrous aluminum silicate. More than forty naturally occurring zeolites were reported by different research groups and more than 150 zeolites have been synthesized. They have been increasingly used in various application areas such as: - industry - agriculture - waterenvironmental and -protection.
Silica Sand * Silica Sand is a type of sand usually available in the form of quartz. It is a hard and crystalline form of mineral components. * Silica sand is the most abundant mineral with the purity more than 99.0%. It is the preferred choice of consumption for various industrial purposes.
We are pleased to offer our phosphate from our mines in Egypt - Our Purity from 23% up to 31%
Phosphate Rock is the raw material to manufacture most commercial phosphate fertilizers. In its unprocessed state, phosphate rock is not suitable for direct application. The process begins by grinding rock phosphate to a fine material. Potash is also fed together with super phosphate to obtain various grades of fertilizers.
17851 Ores Minerals Suppliers
Short on time? Let Ores Minerals sellers contact you.
