Hastelloy C276 is a tungsten added nickel-molybdenum-chromium super alloy designed to offer excellent corrosion resistance in wide range of severe environments. The chromium in Hastelloy C276 conveys resistance to oxidizing media while high molybdenum and nickel content makes the nickel alloy specially resistant to pitting and crevice corrosion in reducing environments. Chemical Composition Hastelloy C276 Analysis NiBal Mo15 17 Cr14.5 16.5 Fe4 7 W3 4.5 Co2.5 max Mn1.0 max C0.01 max v0.35 max P0.04 max S0.03 max Si0.08 max
Monel 400 is a nickel-copper super alloy that is resistant to steam at high temperatures and sea water as well as to caustic and salt solutions. A solid solution alloy (Monel 400) that can only hardened by cold working. Monel 400 exhibits characteristics like high strength , toughness , good weldability and good corrosion resistance . Chemical Composition Monel 400 Ni63.0 min Fe1.0 – 2.5 C0.3 max Mn2.0 max Si0.5 max Cu28.0 – 34.0 Al0.50 max S0.02 max
Inconel 600 Inconel 600 is a nickel-chromiumsuper alloy. It is readily weldable and non-magnetic in nature and used in various corrosion resisting applications. The chromium content of the Inconel 600 provides resistance to weaker oxidizing environments while the high nickel content provides exceptional resistance to chloride stress corrosion cracking and a level of resistance to reducing environments . Chemical Composition Inconel 600 Ni72.0 min Cr14.0 17.0 Fe6.0 10.0 C0.15 max Mn1.0 max S0.015 max Si0.5 max Cu0.5 max
Incoloy 800,Incoloy 800H , and Incoloy 800HT are nickel-iron-chromium super alloys. When exposed to high-temperature these alloys not only provide excellent resistance to oxidation and carburization but also good strength too. These nickel steel alloys are similar except for the higher level of carbon in Incoloy 800H, and the addition of up to 1.20 percent titanium and aluminum in Incoloy 800HT. Chemical Composition Incoloy800 800H 800HT Ni30-3530-3530-35 Fe39.5 min39.5 min39.5 min Cr19-2319-2319-23 Cu0.75 max0.75 max0.75 max Ti0.15-0.600.15-0.600.25-0.60 Al0.15-0.60 0.15-0.600.85-1.20 C0.1 max 0.05-0.10.06-0.1 Mn1.5 max1.5 max1.5 max S0.015 max0.015 max0.015 max Si1.0 max1.0 max1.0 max
Inconel 625 Inconel 625 is a low carbon Nickel-chromium-molybdenum-niobium super alloy .Inconel 625 is a oxidation and corrosion resistant nickel alloy that is used both for its outstanding aqueous corrosion resistance and high strength. Inconel 625‘s outstanding toughness and strength is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Chemical Composition Inconel 625 Ni58.0 min Cr20.0 – 23.0 Fe5.0 max C0.10 max Mn0.50 max Si0.50 max Mo8.0 – 10.0 Co1.0 max Al0.40 max Ti0.40 max Nb + Ta3.15 – 4.15 P0.015 max S0.015 max
Incoloy 825 Incoloy 825 (Nickel-Iron-Chromium alloy) with addition of copper and molybdenum .Against aqueous corrosion it has better resistance as compared to Incoloy 800, otherwise both are same .To provide exceptional resistance against many corrosive environments is how the chemical composition of Incoloy 825 is designed .Incoloy 825 is specially resistant to sulfuric and phosphoric acids. Chemical Composition Incoloy 825 Ni38.0 46.0 Cr19.5 23.5 Fe22.0 min Mb2.5 3.5 Ti0.6 1.2 Cu1.5 3.0 Mn1.0 max C0.05 max S0.03 max Al0.2 max Si0.5 max
HMS stands for heavy melting scrap, and 1 & 2 are the two grades within that definition. Heavy melting steel (HMS) or heavy melting scrap, is a designation for recyclable steel and wrought iron. It is broken up into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. Both HMS 1 & 2 comprise obsolete scrap only. That is iron and steel recovered from items demolished or dismantled at the end of their life. Because both grades guarantee a minimum piece thickness – at least 1/4inch (6.3mm) for HMS 1, and 1/8in for HMS 2 – consignments have a high density. Both also have defined maximum dimensions (usually 60in x 24in), and should be prepared to facilitate handling and charging to a furnace. This density, sizing and preparation makes for efficient furnace operation by minimising the time to charge enough scrap for a full melt. In contrast, thin mixed scrap greatly increases charging time, cutting furnace productivity. HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Our Products Coal Trading Company HMS Trading Company
We are Offering wide range of Metal Furniture for you in our unique selection of Metal Furniture. Metal Furniture at wholesale prices. Metal Furniture for living room, bedroom, dining room, bar furniture,Contemporary metal table and chairs, Metal Garden Furniture, Metal Bed, chairs, Metal outdoor furniture, Metal office furniture, Metal Cabinets, Metal Racks, Hospital Furniture Metal Medical Furniture, Durable Metal Furniture and more.
NICKEL ALLOYS & TITANIUMS (PIPES, TUBES, PLATES, SHEETS, WIRES & BARS) : INCONEL 600, INCONEL 601, INCONEL 625, INCONEL X750, INCONEL 718, INCOLOY DS, INCOLOY 800, INCOLOY 800H/800HT, INCOLOY 825, HASTELLOY C276, HASTELLOY C22, HASTELLOY B2, HASTELLOY X, ALLOY 20, MONEL 400, MONEL K-500, NICKEL 200, NICKEL 201, TITANIUM, CUPRO NICKEL. PIPES & TUBES : ASME SB / ASTM B161 / B163 / B165 / B167 / B338 / B444 / B466 / B467 / B619 / B622 / B626 / B704 / B705 / B861 / B862 PIPE FITTINGS (BUTT WELD) : ASME SB / ASTM B366 / B363 PLATES & SHEETS : ASME SB / ASTM B127 / B162 / B168 / B265 / B409 / B424 / B443 / B463 / B575 SOCKET WELD & THREADED FITTINGS : ASME SB / ASTM B381 / B462 / B564 / B637 FLANGES & BARS : ASME SB / ASTM B160 / B164 / B166 / B348 / B381 / B408 / B425 / B444 / B446 / B462 / B564 / B574 / B637 / B865
Ferrous metals scrap, hms, used rails, vehicle scrap metal, demolition site scrap metal, non ferrous metals scrap, aluminum & aluminum scrap, copper scrap, brass scrap, lead scrap, zinc scrap, stainless steel scrap, electrical cable scrap.
Guar gum powder as per your requirement 25kgs
Guar gum powder for all industries as per requirement 25 kgs
Quality products.
Monel.
Inconel.
Monel.
nbbbbyfjuytdkiuyku kvuyloibucirlkc6tc7y
We supply furnaces/plants on turnkey basis As per customer's specifification / requirement
W + mo + v : 10-11%, phos : 0.03 to 0.047%, size : 25-30 kgs square pieces. 20-26 mt, 1 mt jumbo bags
Sail product. Matrik tonne